NOTICE

This document contains proprietary and confidential information of Performance Motion Devices,
Inc., and is protected by federal copyright law. The contents of this document may not be disclosed

to third parties, translated, copied, or duplicated in any form, in whole or in part, without the express

written permission of PMD.
The information contained in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form, by any means, electronic or mechanical,

for any purpose, without the express written permission of PMD.

Magellan and C-Motion are trademarks of Performance Motion Devices, Inc

MC55000 Electrical Specification � Preliminary 11/14/2003

iii

Warranty

PMD warrants performance of its products to the specifications applicable at the time of sale in
accordance with PMD's standard warranty. Testing and other quality control techniques are utilized

to the extent PMD deems necessary to support this warranty. Specific testing of all parameters of

each device is not necessarily performed, except those mandated by government requirements.
Performance Motion Devices, Inc. (PMD) reserves the right to make changes to its products or to
discontinue any product or service without notice, and advises customers to obtain the latest version

of relevant information to verify, before placing orders, that information being relied on is current

and complete. All products are sold subject to the terms and conditions of sale supplied at the time

of order acknowledgement, including those pertaining to warranty, patent infringement, and

limitation of liability.

Safety Notice

Certain applications using semiconductor products may involve potential risks of death, personal

injury, or severe property or environmental damage. Products are not designed, authorized, or
warranted to be suitable for use in life support devices or systems or other critical applications.

Inclusion of PMD products in such applications is understood to be fully at the customer's risk.
In order to minimize risks associated with the customer's applications, adequate design and operating

safeguards must be provided by the customer to minimize inherent procedural hazards.

Disclaimer

PMD assumes no liability for applications assistance or customer product design. PMD does not
warrant or represent that any license, either express or implied, is granted under any patent right,

combination, machine, or process in which such products or services might be or are used. PMD's
publication of information regarding any third party's products or services does not constitute PMD's

approval, warranty or endorsement thereof.

MC55000 Electrical Specification � Preliminary 11/14/2003

Электронный компонент: DK55120CP

Document Outline