25
PRODUCT SPECIFICATION
Product Features
CAMERA SYSTEMS
International Standards Organization Registered Firm ISO 9001 Quality System
300 Series Camclosure
TM
Camera System
INTEGRATED CAMERA SYSTEM, INDOOR/OUTDOOR, WALL OR CEILING
CAMCLOSURE
ICS300 SERIES W
ALL/CEILING
Fully-Integrated Enclosure With Camera and Lens Package
Rugged, Impact- and Vandal-Resistant
Easy to Install
Versatile, Aesthetically Pleasing "Track Light" Design,
Mounts to Wall or Ceiling
Tamper-Resistant Hardware
Concealed Cabling
12 VDC or 24 VAC Operation
Low-Temperature Operation to -50
F (-46
C); de-ices to
-10
F (-23
C)
Clear Window
NTSC/PAL or EIA/CCIR Camera Formats
All Color Cameras Feature Digital Signal Processing
Fixed Focal Length Lens of 2.9 mm, 6 mm, 8 mm, or 12 mm
Varifocal Lens of 3 mm to 6 mm with Auto Iris, Available
with High Resolution Color Camera
AC Line Lock with All Color Cameras in 24 VAC Operation
All Lenses, Except Varifocals, are Pre-focused at the
Factory
Meets NEMA 4X and IP66 Standards (when installed)
Optional Conduit Adapter Available
The 300 Series Camclosure
TM
Integrated
Camera System
incorporates a camera and lens
package into a small, unobtrusive, medium-security
enclosure. The system is quick and easy to install in a
variety of indoor or outdoor applications. It is ideal for
residential, office, mall, hospital, school, parking
garage, correction and detention, and other medium-
security installations subject to vandalism.
The 300 Series System ships with a sun shroud
and 4S adapter plate to mount the unit to a standard
4-square electrical box. The sun shroud is designed for
outdoor installations and reduces internal temperature
by 10 degrees F (6 degrees C). An optional conduit
adapter (ICS300-COND) allows the unit to be used in
applications requiring conduit.
All models are designed for either 12 VDC or 24 VAC
operation. Each unit is provided with two quick-
connect mating connectors with leads; one for 12 VDC
and one for 24 VAC. Just select the appropriate
connector for your application, wire the leads to your
power source with wing nuts, and snap the connectors
together -- it's that simple!
Camera options include 1/3-inch format CCD color
imager (standard or high resolution) and monochrome
imager (standard resolution) with fixed focal length
lenses of 2.9 mm, 6 mm, 8 mm, and 12 mm. Cameras
with a varifocal lens have a 1/4-inch format high
resolution CCD color imager.
DataFAX Documents
SPEC:
22408
MANUAL:
224086 (ICS300), 22966 (ICS300-COND)
C2408/REVISED 10-00
(Product specifications and manuals also available through Pelco Online at www.pelco.com)
300 SERIES
IP66
TECHNICAL SPECIFICATIONS
26
CAMERA SYSTEMS
ICS300 SERIES W
ALL/CEILING
ELECTRICAL
Input Voltage
12 VDC or 24 VAC (
10%)
Camera
<3 watts
Heaters
10 watts when active; thermostati-
cally controlled
Video Connector
BNC
GENERAL
Pan/Tilt Adjustment
Manual
180
pan; 180
tilt
Construction
Aluminum base and cover, steel
camera mounting bracket
Environmental
Environment
Low temperature, indoor/outdoor
Operating Temperature
-50
to 122
F (-46
to 50
C);
de-ices at -10
F (-23
C)
Thermostat Operation
Heater is thermostatically
controlled to activate
ON at 50
F (10
C) and
OFF at 80
F (27
C)
PHYSICAL
Finish
Gray polyester powder coat
Dimensions
Camclosure
2.71 (diameter) x 7.79 (L) inches
(6.88 x 19.79 cm)
Sun Shroud
2.60 (H) x 6.13 (L) inches
(5.23 x 15.57 cm)
Snap fit design mounts sun shroud
to enclosure
Unit Weight
1.45 lb (0.66 kg)
Shipping Weight
2.0 lb (0.90 kg)
CERTIFICATIONS/RATINGS
x
CE and FCC, Class A (models with monochrome cameras
only, excluding auto iris models)
x
CE and FCC, Class B (models with color cameras only,
excluding auto iris models)
x
UL listed to Standard 2044
x
cUL to CSA C22.2 No.1
x
Meets IP66 when installed properly
x
Meets NEMA 4X when installed properly, includes:
Corrosion protection test; NEMA 250, Section 6.9
(exceeds IEC 68-2-11)
Rust resistance test; NEMA 250, Section 6.8
Hose down test; NEMA 250, Section 6.7
Exceeds SAE J1211 dust test
x
Tested in accordance with MIL-STD 810E as follows:
Shock test; Section 516.4 (exceeds IEC 68-2-27)
Humidity test; Sections 520.1 and 507.3 (exceeds IEC
68-2-30)
Vibration test, Section 514.4 (exceeds IEC 68-2-6)
x
ASTM Shipping Standard
x
ISTA Shipping Standard
All tests are performed in accordance with ISO Guide 25
and ANSI/NCSL Z540-1
WINDOW VIEW
BASE VIEW
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.00
(5.08)
1.30
(3.30)
3.48
(8.84)
2.76
(7.01)
7.40
(18.79)
5.18
(13.20)
2.21
(5.61)
3.00
(7.62)
1.31
(3.32)
27
CAMERA SYSTEMS
TECHNICAL SPECIFICATIONS
CAMCLOSURE
ICS300 SERIES W
ALL/CEILING
CAMERA SPECIFICATIONS
Black & White
Color
Color
Color
Standard Resolution
Standard Resolution
High Resolution, Fixed Focal Lens High Resolution, Varifocal Lens
(Models ICSxxx-MAx/
(Models ICSxxx-CAx/
(Models ICSxxx-CRx/
(Models ICSxxx-CRVx/
ICSxxx-MCx)
ICSxxx-CCx)
ICSxxx-CSx)
ICSxxx-CSVx)
Signal System
EIA or CCIR
NTSC or PAL
NTSC or PAL
NTSC or PAL
Imaging Device
1/3-inch CCD
1/3-inch Interline Color CCD
1/3-inch Interline Color CCD
1/4-inch Interline Color CCD
(Super HAD)
Scanning System
2:1 Interlace
2:1 Interlace
2:1 Interlace
2:1 Interlace
Sync System
Internal
12 VDC: Internal
12 VDC: Internal
12 VDC: Internal
24 VAC: External (VD Lock)
24 VAC: External (VD Lock)
24 VAC: External (VD Lock)
Horizontal
Resolution
EIA:
420 TV lines
NTSC: 350 TV lines
NTSC: 470 TV lines
NTSC: 480 TV lines
CCIR: 420 TV lines
PAL:
350 TV lines
PAL:
460 TV lines
PAL:
480 TV lines
Signal-to-Noise
Ratio
50 dB
48 dB
48 dB
48 dB (AGC Off)
Min. Illumination
Sensitivity
0.1 lux (f2.0)
1 lux (f2.0)
1 lux (f2.0)
Less than 1.2 lux (f1.2)
Video Out
1 Vp-p Composite
1 Vp-p Composite
1 Vp-p Composite
1 Vp-p Composite
(75 ohm)
(75 ohm)
(75 ohm)
(75 ohm)
Gain Control
Auto
Auto
NTSC: Auto
On/Off by DIP switch
PAL:
Manual
(0-20dB)
Exposure
Electronic Shutter
Electronic Shutter
Electronic Shutter
Electronic Shutter
(1/60 - 1/100,000)
(1/60 - 1/100,000)
(1/60 - 1/100,000)
(1/60 - 1/100,000)
White Balance
(not applicable)
Auto
NTSC: Auto
Auto
PAL:
Manual
Backlight
Compensation
Auto
ON, OFF (switchable)
NTSC: Auto
Auto; adjusts AGC and AES
PAL:
Manual On/Off
Power Source*
12 VDC, 24 VAC
12 VDC, 24 VAC
12 VDC, 24 VAC
12 VDC, 24 VAC
*24 VAC power is recommended when installing any Camclosure
TM
Integrated Camera System under flourescent lighting conditions.
LENS SPECIFICATIONS
Fixed Focal Length Lenses
Varifocal Lens
Color
B/W
Color
B/W
Color
B/W
Color
B/W
Focal Length
2.9 mm
3.0 mm
6.0 mm
8.0 mm
12.0 mm
3.0 to 6.0 mm
Format Size
1/3-inch
1/3-inch
1/3-inch
1/3-inch
1/4-inch
Relative Aperture (F)
2.0
1.8
2.5
1.8
2.5
2.0
1.2 to 1.5
Operation
Iris
Fixed
Fixed
Fixed
Fixed
Auto (f1.2 to f300)
Focus
N/A
N/A
N/A
N/A
Manual (minimum 50 cm)
Zoom
N/A
N/A
N/A
N/A
Manual
Angle of View**
Horizontal
90
87
42
38
32
29
21
72
to 36
Diagonal
--
--
--
--
--
--
--
--
96
to 46
Vertical
69
67
33
30
25
23
17
52
to 26
**Focal length specifications presume a 10% Horizontal and 4% Vertical monitor overscan.
28
Specifications subject to change without notice.
Copyright 2000, Pelco. All rights reserved.
Indicates change or addition since last revision.
CAMERA SYSTEMS
MODEL NUMBERS
Pelco 3500 Pelco Way Clovis, CA 93612-5699 Pelco Online @ www. pelco.com
In the US and Canada: Tel (800) 289-9100 FAX (800) 289-9150 DataFAX (800) 289-9108
International Customers: Tel +1(559) 292-1981 FAX +1(559) 348-1120 DataFAX +1(559) 292-0435
CAMCLOSURE
ICS300 SERIES W
ALL/CEILING
300 SERIES SYSTEM MODELS
Camera Type
Lens/Iris
NTSC
PAL
EIA
CCIR
Color,
2.9 mm
ICS300-CR3
ICS300-CS3
--
--
High Resolution
6 mm
ICS300-CR6
ICS300-CS6
--
--
8 mm
ICS300-CR8
ICS300-CS8
--
--
12 mm
ICS300-CR12
ICS300-CS12
--
--
3-6 mm with Auto Iris
ICS300-CRV3A
ICS300-CSV3A
--
--
Color,
2.9 mm
ICS300-CA3
ICS300-CC3
--
--
Standard Resolution
6 mm
ICS300-CA6
ICS300-CC6
--
--
8 mm
ICS300-CA8
ICS300-CC8
--
--
12 mm
ICS300-CA12
ICS300-CC12
--
--
B&W,
3.0 mm
--
--
ICS300-MA3
ICS300-MC3
Standard Resolution
6 mm
--
--
ICS300-MA6
ICS300-MC6
8 mm
--
--
ICS300-MA8
ICS300-MC8
12 mm
--
--
ICS300-MA12
ICS300-MC12
OPTIONS
ICS300-COND
Conduit adapter. Can be adapted
to any vertical or horizontal
mounting surface.
RECOMMENDED POWER SUPPLIES
(For use with 24 VAC models only)
TF2000
Power supply for 24 VAC
cameras, 20 vA. (For single
camera application.)
MCS Series
Multiple 24 VAC camera power
supply, indoor. (For multiple
camera application.)
(See C653
spec)
MCS*E Series
Multiple 24 VAC camera power
supply, indoor. (For multiple
camera application.)
(See C655
spec)
WCS Series
Multiple 24 VAC camera power
supply, outdoor. (For multiple
camera application.)
(See C654
spec)
1.73
(4.39)
4.36
(11.07)
4.20
(10.67)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
5.00
12.7
Camclosure
TM
is a trademark of Pelco.
PDF 
ZIP