A 0 to 70 C
B -20 to 70 C
C -40 to 85 C
D -10 to 50 C
E -10 to 60 C
F
-30 to 60 C
J
0 to 50 C
X - Custom
Temp. Range
NOTE : Waveforms & Test Circuits on pages 48, 49
Standard Specifications for product indicated in
color
39
MARKING: See Page 52, Format A
MARKING: See Page 52, Format A
Dimensions:
I n c h e s
(mm)
SPECIFICATIONS
SPECIFICATIONS
PART NUMBERING SYSTEM
PART NUMBERING SYSTEM
FMVCJS
FMVCJS 50
50 CC EE A
A S L
S L -
- XX.XXXXXXM
XX.XXXXXXM - - CM
CM
00 - 100 ppm
50 - 50 ppm
25 - 25 ppm
20 - 20 ppm
nn - Custom Value
Low Profile
5.0 Vdc Supply Voltage
HCMOS/TTL Compatible
Tape & Reel
Overall Frequency Tol.
Frequency (MHz)
HCMOS/TTL Compatible
5.0 Vdc VCXO
J-Lead Plastic SMD
Product Family
15302 Bolsa Chica St., Huntington Beach, CA. 92649
Tel.: 714-892-3234 Fax: 714-890-1832
E-mail: sales@frequencymanagement.com
www.frequencymanagement.com
1-800-800-XTAL
(9825)
TR - Tape and Reel
PD - Parameter Data
CM - Custom Mark
BLANK - None Req'd.
Options
B - 75 ppm
C - 100 ppm
D - 125 ppm
X - Custom
Z - No Spec.
C - 100 ppm
D - 125 ppm
E - 150 ppm
X - Custom
Z - No Spec.
S - Tight Symmetry
(45/ 55%) < 35 MHz only
L - Linearity 10% Max.
BLANK - None Required (Std.)
Spec. Options
1 Control Voltage (Vc)
2 Case Ground
3 Output
4 Supply Voltage (Vdd)
Parameter
Specification
J-LEAD PLASTIC SMD
Pin Function
PIN FUNCTION TABLE
Frequency Range
2.0 to 55.0 MHz
Overall Frequency Tolerance
25 ppm to 100 ppm
(Inclusive of Operating Temp., Supply Voltage, & Load.)
Operating Temperature Range 0 to +70C Std.
Storage Temperature
-40 to +125C
Supply Voltage (Vdd)
+5.0 Vdc (0.5 Vdc)
Supply Current (Icc)
30 mA max. @ 2.0 to 23.9 MHz
50 mA max. @ 24.0 to 55.0 MHz
Symmetry (Duty Cycle)
40/60% Std., 45/55% Available (See Spec. Option S).
Output "O" Level (V
OL
)
0.4 Vdc max. (TTL)
0.5 Vdc max. (HCMOS)
Output "1" Level (V
OH
)
2.4 Vdc min. (TTL)
4.5 Vdc min. (HCMOS)
Rise and Fall Time
10 ns max. < 5 ns typical
Linearity
20% max. Std. , 10% Available (See Spec. Option L)
Output Load
10 TTL / 15 pF HCMOS < 40.0 MHz
15 pF HCMOS
Pullability
100 to 150 ppm typical.
(Select a min. and max. pullability from part number.)
Voltage Control Pin 1 Nom. 2.5 Vdc, Range 0.5 to 4.5 Vdc
Control Voltage (Vc)
Nominal 2.5 Vdc, Range 0.5-4.5 Vdc, Positive Transfer
Aging @ 25C
3 ppm max first year
FMVCJS
SERIES
5.0 Vdc VCXO
J - LEAD PLASTIC SMD
Min. Pullability
Max. Pullability
MARKING: See Page 57, Format P
MARKING: See Page 57, Format P
All specifications subject to change without notice.
PDF 
ZIP