ChipFind - документация

Электронный компонент: FAR-C4CG-16000-M02

Скачать:  PDF   ZIP

Document Outline

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-20103-1E
Resonator
Piezoelectric Resonator
(8 to 16 MHz)
FAR Family (C4 series G type)
s
DESCRIPTION
Fujitsu resonators C4 series (G type) feature originally developed single crystals with a high electromechanical
coefficient (LiNbO
3
lithium niobate), the result is ultra compact packaging. C4 series (G type) with built-in
capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount.
s
FEATURES
Ultra compact package.
Wide frequency range in 8 to 16 MHz.
C4 (G type), with built-in capacitors, is the best suited to the source of microcomputer clocks.
C4 (G type) can be shipped in emboss-typed packages for automatic mounting.
The resonators have superior shock and vibration resistance, preventing damage during automatic mounting
process.
s
PACKAGE
2
FAR Family (C4 series G type)
s
STANDARD CHARACTERISTICS
Series
C4 series (G type)
Remarks
Parameter
Material
Lithium Niobate (LiNbO
3
)
Frequency
8 to 16 MHz
Standard frequency
See "
s
Standard Frequency."
Initial frequency
deviation
0.5% ()
Temperature
characteristics
(20
C to 60
C)
0.5%
Capacity of built-in
capacitor
208 pF (Standard)
104 pF type are also available.
However, the characteristics of 104 pF type
should be specified by Fujitsu, considering
matching data with applied IC (mainly
microcomputer.)
Aging stability
Within 0.1%
Operating temperature
30
C to +85
C
Storage temperature
40
C to +100
C
Standard measuring
circuit
8 MHz to 10 MHz
IC: 1/6 MB84069B x 2
10 MHz to 16 MHz
IC: 1/6 MC74HC04 x 2
V
CC
=5 V DC
R : Resonator
C
1
, C
2
: Loading capacitance (built-in)
(1) Oscillation frequency
(2) Serial resonant resistance
Measuring equipment: Network analyzer
R: Resonator
R
75
75
C
1
C
2
C
1
C
2
OSC
1 M
LM
R
1
3
2
3
FAR Family (C4 series G type)
s
STANDARD FREQUENCY
Note: For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part.
Resonant resistance of the part is specified according to applied frequency as above.
s
NOTES ON USE
Handle carefully
Solder under the following conditions.
5 seconds max. at 230
C (PCB)
Do not apply extreme heat to the resonator. Recommended preheating is 150
C for one minute.
Avoid extreme fluctuations in temperature during use.
There is no specific direction in resonator mounting.
Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
This is for reflow solder, not for flow solder.
Standard frequency (KHz)
Package size
Resonant resistance
8,000
10,000
G
100
max. (Symbol: 5)
11,000
11,059
12,000
16,000
G
75
max. (Symbol: 2)
4
FAR Family (C4 series G type)
s
PART NUMBERING SYSTEM
(1) Series
(2) Package Type
(3) Package Size
(4) Frequency (KHz)
See "
s
Standard Frequency."
[Example] 8.0 MHz 08000
(5) Initial Frequency Deviation
(6) Built-in Capacitor
(7) Resonant Resistance
Series
Single crystal
Capacitor
C4
LiNbO
3
With built-in capacitors
Specification
Type
C
Chip type
Specification
Size
G
G type(Ultra compact)
Specification
Deviation
M
0.5%
Specification
Capacitance
0
208 pF
1
104 pF
Specification
Resonant resistance
2
75
max.
5
100
max.
FAR C4 C
G
(1)
(2) (3)
(4)
(5) (6) (7)
(9)
(8)
R
5
FAR Family (C4 series G type)
(8) User-specific Special Symbols
(9) Taping Specification
s
MARKING
Specification
Description
Name
No specification, no taping specification
--
No specification, with taping specification
A to Z
Serial number for custom design
Specification
Description
R
12 mm width tape & reel
*EIAJ RC1001 standard
Year
1993
1994
1995
1996
Jan
A
N
a
n
Feb
B
P
b
Mar
C
Q
Apr
D
R
d
r
May
E
S
e
Jun
F
T
f
t
Jul
G
U
u
Aug
H
V
v
Sep
J
W
j
Oct
K
X
Nov
L
Y
Dec
M
Z
Note: The code on and after Jan 1997 is specified repeatedly from "A".
F
12 A n
Fujitsu logo
Frequency (MHz) & Deviation
Lot No. (Date confirms to EIAJ. * )
10 pF
20 pF
Marking color
Yellow
White
The stamp color varies according to
built-in capacitor.
6
FAR Family (C4 series G type)
s
PIN ASSIGNMENT
s
DIMENSIONS
(1)
(2) (3)
(1)
(3)
(2)
.200(5.1)
.083(2.1)
.059(1.5)
.018(0.47)
.220(5.6)
Unit: inches (mm)
.102(2.6)
.006(0.15)
.006(0.15)
.040
(1.0)
.063
(1.6)
.035
(0.9)
.035
(0.9)
.040
(1.0)
7
FAR Family (C4 series G type)
s
TAPE & REEL DIMENSIONS
.055.059
(14.01.5)
.157.004(4.00.1)
.079.004(2.0
0.1)
.075(1.9)
.512
.008
(
13.00.2)
.079.020
(2.0
0.5)
.827.031
(
210.8)
R .039(1.0)
.079.020
(2.00.5)
12.992.078
(
3302.0)
3.150
(
80)
.059
.004
0
Unit: inches (mm)
.012(0.3)
.472
.012
.217.004
(5.50.1)
(
1.0
)
0.1
0
Reel quantity
QTY/reel
3,000 pcs
(
1.5 )
.315.004
(8.00.1)
3.10.1
6.20.1
.059
.004
(1.5
0.1)
(12.00.3)
0.1
0
.040
.004
0
.089.004
(2.250.1)
.089.004
(2.250.1)
8
FAR Family (C4 series G type)
s
RESONATOR BUSINESS FLOW CHART
RECEIVE INQUIRY
Oscillation frequency should be varied according to applied micro controller or another IC's.
Fujitsu should recommend the resonator parts considering matching condition with applied IC.
Following shows business flow chart.
CUSTOMER
FJ
TO CHECK APPLIED CPU AND
AVAILABILITY OF MATCHING
DATA
TO BORROW APPLIED CPU
TO TAKE MATCHING DATA (3 WEEKS)
TO SUBMIT DATA
REDESIGN (6 WEEKS)
TO SUBMIT SAMPLE
TO SUBMIT SPEC
TO CHECK THE NECESSITY
OF FREQUENCY ADJUSTMENT
EVALUATION
SIGN AND SEND BACK
NO MATCHING DATA
MATCHING DATA
AVAILABLE
NOT OK
OK
NECESSARY
NOT NECESSARY
FAR Family (C4 series G type)
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU MEDIA DEVICES LIMITED
Marketing and Technical Support Dept.
SHINYOKOHAMA SQUARE BLDG
2-3-12,Shin-yokohama,
Kouhoku-ku, Yokohama-shi,
Kanagawa 222-0033, Japan
Tel: +81-45-471-0067
Fax: +81-45-471-0069
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
North and South America
FUJITSU MICROELECTRONICS, INC.
3545 North First Street,
San Jose, CA 95134-1804, U.S.A.
Tel: +1-408-922-9000
Fax: +1-408-922-9179
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: +1-800-866-8608
Fax: +1-408-922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MICROELECTRONICS EUROPE GmbH
Am Siebenstein 6-10,
D-63303 Dreieich-Buchschlag,
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122
http://www.fujitsu-fme.com/
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LTD.
#05-08, 151 Lorong Chuan,
New Tech Park,
Singapore 556741
Tel: +65-281-0770
Fax: +65-281-0220
http://www.fmap.com.sg/
F9703
FUJITSU LIMITED Printed in Japan
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The contents of this document may not be reproduced or copied
without the permission of FUJITSU LIMITED.
FUJITSU semiconductor devices are intended for use in standard
applications (computers, office automation and other office
equipments, industrial, communications, and measurement
equipments, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or
where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before
such use. The company will not be responsible for damages arising
from such use without prior approval.
Any semiconductor devices have inherently a certain rate of failure.
You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.