ChipFind - документация

Электронный компонент: FAR-C4CQ-04000-K22-RR

Скачать:  PDF   ZIP

Document Outline

DS07-10204-1E
FUJITSU SEMICONDUCTOR
DATA SHEET
Resonator
Piezoelectric Resonator
(4 to 16 MHz)
FAR Family (C4 series P/Q type)
For Motor Application
s
DESCRIPTION
Fujitsu resonators C4 series (P/Q type) feature single crystals with a high electro-mechanical coefficient (LiNbO
3
:
lithium niobate), the result is very compact packaging.
C4 series (P/Q type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip
type device for surface-mount and suitable for motor appication due to its high reliability package.
s
FEATURES
Wide frequency range in 4 to 16 MHz
Suitable for microcomputer clock
PCT (121
C, 2 atms, 96 hours) is guaranteed for Motor application.
Emboss-typed pack for automatic mounting
Superior shock and vibration resistance, preventing damage during automatic mounting
s
PACKAGE
F
4.00
NMK
F
8.00NKA
2
FAR Family (C4 series P/Q type)
s
STANDARD CHARACTERISTICS
C4 series (P/Q type)
Remarks
Material
Lithium Niobate (LiNbO
3
)
Frequency
4 to 16 MHz
Standard frequency
See "
s
Standard Frequency."
Initial frequency deviation
0.5% (M)
The
0.3% (K) version can also be
produced.
Temperature characteristic
(40
C to +105
C)
Reference temperature: +25
C
Capacity of built-in capacitor
20
8 pF (standard)
10
4 pF, 30
8 pF are also available.
Capacity is specified by Fujitsu,
considering matching data with
applied IC (mainly microcomputer).
Aging stability
Within
0.1%
For ten years at room temperature
PCT
96 hours guaranteed
Unsturated PCT: 121
C
2 atomospheric pressures
Operating temperature
40
C to +105
C
Storage temperature
55
C to +105
C
Standard measuring circuit
Resonant frequency
Serial resonant resistance
% (M)
0.9
1.0
1 M
R
C
1
C
2
4 MHz to 10 MHz
IC: MB84069B
2
10 MHz to 16.0 MHz
IC: MC74HC04
2
V
CC
: 5 V DC
R: Resonator
C
1
, C
2
: Loading capacitors (built-in)
FAR
C
1
C
2
LM
R
75
75
OSC
R: Resonator
Measuring instrument: Network analyzer
Series
Parameter
3
FAR Family (C4 series P/Q type)
s
STANDARD FREQUENCY
Notes: Fujitsu can also develop applicable device in addition to standard devices if it's oscillation frequency is
from 4 to 16 MHz.
Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance
according to applied frequency. (See " Frequency and standard resonant resistance.")
Frequency and standard resonant resistance
s
NOTES ON USE
Handle carefully
Solder under the following conditions.
5 seconds max. at 230
C (PCB)
Recommended preheating is 150
C for one minute in order not to apply extreme heat to the resonator.
Avoid extreme fluctuations in temperature.
There is no specific direction in resonator mounting.
Oscillation data should be examined when used in oscillation circuit with microcomputer or other ICs.
This is for reflow solder, not for flow solder.
Standard frequency (kHz)
Package size
Resonant resistance
4,000
P
150
max.
(Symbol: 01)
8,000
10,000
12,000
16,000
Q
75
max.
(Symbol: 02)
Frequency
Standard resonant resistance
4.00 to 5.99 MHz
150
max. (Symbol: 1)
6.00 to 16.00 MHz
75
max. (Symbol: 2)
4
FAR Family (C4 series P/Q type)
s
PART NUMBERING SYSTEM
(1) Series
(2) Package Type
(3) Package Size
(4) Frequency
(Example) Unit: kHz (Specify in five digits.)
See "
s
Standard Frequency".
(5) Initial Frequency Deviation
(6) Built-in Capacitor
Series
Single crystal
Capacitator
C4
LiNbO
3
With built-in capacitator
Specification
Type
C
CHIP
Specification
Size
P
Large (4.0 to 5.9 MHz)
Q
Small (6.0 to 16.0 MHz)
Frequency
Specification
8.000 MHz
08000
Specification
Deviation
K
0.3%
M
0.5%
Specification
Capacitance
0
20
8 pF
1
10
4 pF
2
30
8 pF
FAR
C
(1) (2)
--
--
--
--
C
4
(3)
(4)
(5) (6) (7) (8) (9)
5
FAR Family (C4 series P/Q type)
(7) Resonant Resistance
(8) User-specific Special Symbols
(9) Taping Specification
Specification
Resonant resistance
1
150
2
75
Specification
Description
Name
No specifications, no taping specification
--
No specifications, with taping specification
A to Z
Serial number for custom design
Specification
Description
R
16 mm wide emboss tape (3,000 pcs)
6
FAR Family (C4 series P/Q type)
s
MARKING
Data code (EIAJ standard) is specified as follows in four-year cycle.
Year
Month Symbol
Year
Month Symbol
Year
Month Symbol
Year
Month Symbol
1997
2001
1
A
1998
2002
1
N
1999
2003
1
a
2000
2004
1
n
2
B
2
P
2
b
2
3
C
3
Q
3
3
4
D
4
R
4
d
4
r
5
F
5
S
5
e
5
6
G
6
T
6
f
6
t
7
H
7
U
7
7
u
8
I
8
V
8
8
9
J
9
W
9
j
9
10
K
10
X
10
10
11
L
11
Y
11
11
12
M
12
Z
12
12
8.00 NMK
F
Fujitsu logo
10 pF
20 pF
Capacitance
Yellow
White
30 pF
Gray
Marking color
Note: The marking color varies with the capacitance of the built-in capacitator.
Lot No. (Date of manufacture, conforms to EIAJ)
Frequency (MHz)
Initial frequency deviation
N: LiNbO
3
Material symbol
7
FAR Family (C4 series P/Q type)
s
PIN ASSIGNMENT
s
DIMENSIONS
(1)
(3)
(3)
(2)
(2)
(1)
Unit: mm
2.54
2.54
1.5
W
2.5
L
1
W
1
L
0.5
Size
L
L
1
W
W
1
P
10.0
9.4
4.5
3.3
Q
8.0
7.4
3.2
2.6
8
FAR Family (C4 series P/Q type)
s
TAPING FORM AND DIMENSIONS
2.0
0.5
13.0
0.5
21.0
0.8
R1.0
80
2.0
0.5
330
0.2
18.0
1.5
8.0
0.1
W
0.1
0.1
16.0
0.2
7.65
0.2
1.5
0.1
1.5
0.1
0
4.0
0.1
2.0
0.1
Pack quantity
Unit: mm
2.1
0.1
4.0
10 = 40
0.2
(6.85)
W
Package size
t
5.0
10.5
3.0
3.7
P
Q
8.5
2.8
Reel form
3,000
Quantity
P, Q
Package size
12
FAR Family (C4 series P/Q type)
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 4-1-1, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211-88, Japan
Tel: (044) 754-3763
Fax: (044) 754-3329
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, U.S.A.
Tel: (408) 922-9000
Fax: (408) 432-9044/9045
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
63303 Dreieich-Buchschlag
Germany
Tel: (06103) 690-0
Fax: (06103) 690-122
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED
#05-08, 151 Lorong Chuan
New Tech Park
Singapore 556741
Tel: (65) 281-0770
Fax: (65) 281-0220
F9705
FUJITSU LIMITED Printed in Japan
All Rights Reserved.
The contents of this document are subject to change without
notice. Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document presented
as examples of semiconductor device applications, and are not
intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the
use of this information or circuit diagrams.
FUJITSU semiconductor devices are intended for use in
standard applications (computers, office automation and other
office equipment, industrial, communications, and measurement
equipment, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage,
or where extremely high levels of reliability are demanded (such
as aerospace systems, atomic energy controls, sea floor
repeaters, vehicle operating controls, medical devices for life
support, etc.) are requested to consult with FUJITSU sales
representatives before such use. The company will not be
responsible for damages arising from such use without prior
approval.
Any semiconductor devices have inherently a certain rate of
failure. You must protect against injury, damage or loss from
such failures by incorporating safety design measures into your
facility and equipment such as redundancy, fire protection, and
prevention of over-current levels and other abnormal operating
conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required
for export of those products from Japan.