ChipFind - документация

Электронный компонент: FAR-F5CM-902M50-B263-U

Скачать:  PDF   ZIP

Document Outline

DS04-23119-2E
FUJITSU MEDIA DEVICE
DATA SHEET
ASSP
Mobile Communication Systems
SAW Filter
(700 to 1000 MHz)
F5CM Series (B2)
s
s
s
s
DESCRIPTION
The F5CM series of SAW filters have balanced in/unbalanced out or unbalanced in/balanced out of I/O ports.
Therefore these filters are suitable for the design using balanced type of IC. By using these filters, any transforming
devises, such as balun is not required.
The F5CM series filters apply to the frequency range 700 to 1000MHz. High performance has been realized with
high reliability and small size by using original materials and original design.
The F5CM series filters are suitable for RF interstage filter in mobile communication systems and standard parts
are available for GSM and AMPS/TDMA/CDMA standards.
s
s
s
s
FEATURES
Balanced/unbalanced I/O ports
Ultra compact and light package (3.0 mm
3.0 mm package)
Any external matching network is not required
Excellent stopband attenuation
Small inband ripple
Surface mount package (SMT)
s
s
s
s
PACKAGE
F5CM Series (B2)
2
s
s
s
s
PIN ASSIGNMENT
s
s
s
s
PIN DESCRIPTION
BALANCED IN/UNBALANCED OUT type (Tx filter)
UNBALANCED IN/BALANCED OUT type (Rx filter)
Pin no.
Pin name
Description
1
GND
Ground Pin
2
OUT
Unbalanced output
3
GND
Ground Pin
4
IN
Balanced Input
5
GND
Ground Pin
6
IN
Balanced Input
Pin no.
Pin name
Description
1
GND
Ground Pin
2
IN
Unbalanced Input
3
GND
Ground Pin
4
OUT
Balanced Output
5
GND
Ground Pin
6
OUT
Balanced Output
(BOTTOM VIEW)
6
5
4
1
2
3
F5CM Series (B2)
3
s
s
s
s
ABSOLUTE MAXIMUM RATINGS
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s
s
s
s
RECOMMENDED OPERATING CONDITION
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
piezoelectric device. All of the device's electrical characteristics are warranted when the device is
operated within these ranges.
Always use piezoelectric devices within their recommended operating conditionranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
s
s
s
s
STANDARD FREQUENCIES
Parameter
Symbol
Rating
Unit
Min.
Max.
Operating temperature
Ta
30
+85
C
Storage temperature
Tstg
40
+100
C
Input power
Pin
--
+15
dBm
Input DC Voltage
DCin
5
+5
V
Parameter
Symbol
Value
Unit
Min.
Max.
Operating temperature
Ta
30
+85
C
Applications
Frequency
(MHz)
Band
width
(MHz)
Input type/
Impedance
Output type/
Impedance
Part number
Part
symbol
GSM
Tx
902.5
25
Balance
50
Unbalance50
FAR-F5CM-902M50-B263
63
Rx
947.5
25
Unbalance
50
Balance50
FAR-F5CM-947M50-B260
60
Balance150
FAR-F5CM-947M50-B262
62
EGSM
Rx
942.5
35
Unbalance
50
Balance50
FAR-F5CM-942M50-B270
70
AMPS/
TDMA/
CDMA
Tx
836.5
25
Balance
50
Unbalance50
FAR-F5CM-836M50-B268
68
Rx
881.5
25
Unbalance
50
Balance50
FAR-F5CM-881M50-B266
66
F5CM Series (B2)
4
s
s
s
s
ELECTRICAL CHARACTERISTICS
1.
GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT
Part number: FAR-F5CM-902M50-B263
(Ta = 30
C to + 85
C)
2.
GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-947M50-B260
(Ta = 30
C to + 85
C)
3.
GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT
Part number: FAR-F5CM-947M50-B262
(Ta = 30
C to + 85
C)
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
890 to 915 MHz
--
3.2
3.5
dB
Inband ripple
890 to 915 MHz
--
1.2
1.5
dB
Absolute
attenuation
DC to 845 MHz
45
58
--
dB
845 to 870 MHz
25
50
--
dB
935 to 980 MHz
25
30
--
dB
980 to 2000 MHz
40
58
--
dB
2000 to 3000 MHz
30
37
--
dB
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
935 to 960 MHz
--
3.0
3.3
dB
Inband ripple
935 to 960 MHz
--
0.9
1.2
dB
Absolute
attenuation
DC to 890 MHz
45
56
--
dB
890 to 915 MHz
25
31
--
dB
980 to 1025 MHz
25
30
--
dB
1025 to 2000 MHz
40
50
--
dB
2000 to 3000 MHz
35
45
--
dB
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
935 to 960 MHz
--
3.3
3.8
dB
Inband ripple
935 to 960 MHz
--
0.8
1.3
dB
Absolute
attenuation
DC to 890 MHz
45
55
--
dB
890 to 915 MHz
25
48
--
dB
980 to 1025 MHz
23
29
--
dB
1025 to 2000 MHz
40
50
--
dB
2000 to 3000 MHz
35
39
--
dB
F5CM Series (B2)
5
4.
EGSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-942M50-B270
(Ta = 30
C to + 85
C)
5.
AMPS/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT
Part number: FAR-F5CM-836M50-B268
(Ta = 30
C to + 85
C)
6.
AMPS/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-881M50-B266
(Ta = 30
C to + 85
C)
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
925 to 960 MHz
--
3.8
4.5
dB
Inband ripple
925 to 960 MHz
--
1.8
2.5
dB
Absolute
attenuation
DC to 880 MHz
50
55
--
dB
880 to 915 MHz
15
22
--
dB
980 to 1025 MHz
23
27
--
dB
1025 to 2000 MHz
40
44
--
dB
2000 to 3000 MHz
25
39
--
dB
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
824 to 849 MHz
--
2.8
3.5
dB
Inband ripple
824 to 849 MHz
--
0.9
1.6
dB
Absolute
attenuation
DC to 800 MHz
45
52
--
dB
869 to 920 MHz
25
33
--
dB
920 to 2000 MHz
35
46
--
dB
2000 to 3000 MHz
25
33
--
dB
Parameter
Conditions
Value
Unit
Remarks
Min.
Typ.
Max.
Insertion loss
869 to 894 MHz
--
2.8
3.5
dB
Inband ripple
869 to 894 MHz
--
0.8
1.5
dB
Absolute
attenuation
DC to 800 MHz
45
55
--
dB
800 to 849 MHz
30
47
--
dB
940 to 1000 MHz
30
38
--
dB
1000 to 2000 MHz
35
47
--
dB
2000 to 3000 MHz
25
32
--
dB
F5CM Series (B2)
6
s
s
s
s
TYPICAL CHARACTERISTICS
1.
GSM (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT
Part number: FAR-F5CM-902M50-B263
2.
GSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-947M50-B260
1
2
3
4
log
MAG
10 dB/
REF
0 dB
1
: -
3.192 dB
0.890 000 000 GHz
2
: -
2.773 dB
0.9150 GHz
3
: -
29.56 dB
0.9350 GHz
4
: -
34.57 dB
0.9500 GHz
FAR-F5CM-902M50-B263
CENTER
900 MHz
SPAN
300 MHz
3
4
log
MAG
10 dB/
REF
0 dB
0.890 000 000 GHz
FAR-F5CM-947M50-B260
CENTER
950 MHz
SPAN
300 MHz
1
: -
58.133 dB
2
: -
32.723 dB
0.9150 GHz
3
: -
2.999 dB
0.9350 GHz
4
: -
2.808 dB
0.9600 GHz
2
1
F5CM Series (B2)
7
3.
GSM (Rx) 50 ohms Unbalanced IN/150 ohms Balanced OUT
Part number: FAR-F5CM-947M50-B262
4.
EGSM (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-942M50-B270
3
4
log
MAG
10 dB/
REF
0 dB
0.890 000 000 GHz
FAR-F5CM-947M50-B262
CENTER
950 MHz
SPAN
300 MHz
1
: -
55.741 dB
2
: -
50.182 dB
0.9150 GHz
3
: -
3.077 dB
0.9350 GHz
4
: -
3.028 dB
0.9600 GHz
1
2
3
4
log
MAG
10 dB/
REF
0 dB
925. 000 000 MHz
FAR-F5CM-942M50-B270
CENTER
950 MHz
SPAN
300 MHz
1
: -
3.5649 dB
2
: -
2.9961 dB
960 MHz
3
: -
59.498 dB
880 MHz
4
: -
20.549 dB
915 MHz
1
2
F5CM Series (B2)
8
5.
AMSP/TDMA/CDMA (Tx) 50 ohms Balanced IN/50 ohms Unbalanced OUT
Part number: FAR-F5CM-836M50-B268
6.
AMSP/TDMA/CDMA (Rx) 50 ohms Unbalanced IN/50 ohms Balanced OUT
Part number: FAR-F5CM-881M50-B266
3
log
MAG
10 dB/
REF
0 dB
0.824 000 000 GHz
FAR-F5CM-836M50-B268
CENTER
850 MHz
SPAN
300 MHz
1
: -
2.566 dB
2
: -
2.763 dB
0.8490 GHz
3
: -
33.493 dB
0.8690 GHz
4
: -
38.685 dB
0.8940 GHz
2
4
1
3
4
log
MAG
10 dB/
REF
0 dB
0.824 000 000 GHz
FAR-F5CM-881M50-B266
CENTER
900 MHz
SPAN
300 MHz
1
: -
57.172 dB
2
: -
48.219 dB
0.8490 GHz
3
: -
2.836 dB
0.8690 GHz
4
: -
2.825 dB
0.8940 GHz
2
1
F5CM Series (B2)
9
s
s
s
s
MEASURMENT CIRCUIT
s
s
s
s
PART NUMBER DESIGNATION
s
s
s
s
MARKING
2
1 3
6
5
4
I n p u t
5 0
O u t p u t
5 0
O u t p u t
5 0 /
1 5 0
1 3
5
2
6
4
I n p u t
5 0
BALANCED IN/UNBALANCED OUT type
(Tx filter)
UNBLANCED IN/BALANCED OUT type
(Rx filter)
Note: Attached frequency response plots are obtained by simulation using above S21, S31, S32, S11,
S22, S33 of each characteristics. Electrical specifications are also decided based on these results.
1 to 6: Pin Number
[Designation example]
(1) Frequency: Center frequency is specified in six alphanumeric.
Enter M (for MHz) at the decimal point.
Refer to below example.
[Example] 902.5 MHz
902M50
(2) Part symbol:
Specified characters from 60 to 79.
(3) Packing:
W: 1000 pcs/reel
(Reeled tape)
V: 3000 pcs/reel
U: 5000 pcs/reel
FARF5CM
B2
(1)
(2) (3)
F
B 1
60
PART SYMBOL
LOGO
DATE CODE
LOT No.
INDEX
F5CM Series (B2)
10
s
s
s
s
PACKAGE DIMENSION
Dimensions in mm.
3.0
3.0
1.2 Max.
0.75
0.75
1.2
0.6
1.5
1.2
2
-
R 0.2
6
5
4
1
2
3
4
-
R 0.3
F5CM Series (B2)
11
s
s
s
s
RECOMMENDED LAND PATTERN
3.0
0.70
1.20
3.0
0.75
1.5
0.2
0.75
0.95
1.20
1.5
Dimensions in mm.
F5CM Series (B2)
12
s
s
s
s
PACKING: Reel type
1.
Reel Dimensions
2.
Packing Style
3.
Tape Dimensions
Dimensions in mm.
2 . 0
0 . 5
1 3 . 0
0 . 2
2 1 . 0
0 . 8
R 1 . 0
1 2 . 4
80
250
2.0
0.0
18.4 Max.
Type Volume
W
1 k pcs
V
3 k pcs
U
5 k pcs
# 1 P I N
P u l l i n g s i d e
R e e l s i d e
P u l l i n g s i d e
Dimensions in mm.
4 . 0
0 . 1
2 . 0
0 . 0 5
5.5
0.1
3.3
0.1
1 . 5
0.1
0
1 . 5
0 . 3
12.0

0.3
4 . 0
0 . 1
1.75

0.1
1 . 5
3 . 3
0 . 1
F5CM Series (B2)
13
4.
Peel Strength of Top Cover Tape
Peel off by the force of 0.1 N to 0.7 N under the
condition at the right.
(Conforms to JIS C 0806 section 5.2)
Direction of pulling
Embossment carrier type tape
Speed 300 mm/min
165 to 180
F5CM Series (B2)
14
s
s
s
s
RECOMMENDED REFLOW PROFILE
s
s
s
s
NOTE
Mass-produced product order is accepted by a unit of 1000.
240
210
150
Pre-Heating
10 s
60 s
60
90 s
Temperature[
C]
Time [s]
Air cooling
Heating rate
1 to 4
C /s
F5CM Series (B2)
FUJITSU MEDIA DEVICES LIMITED
For further information please contact:
Japan
FUJITSU MEDIA DEVICES LIMITED
International Sales and Marketing Dept.
Sin-Yokohama Square Bldg.,14F,
Shin-Yokohama 2-3-12, Kouhoku-ku,
Yokohama-shi, Kanagawa 222-0033, Japan
Tel: +81-45-471-0061
Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
North and South America
FUJITSU MICROELECTRONICS, INC.
3545 North First Street,
San Jose, CA 95134-1804, U.S.A.
Tel: +1-408-922-9000
Fax: +1-408-922-9179
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: +1-800-866-8608
Fax: +1-408-922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MICROELECTRONICS EUROPE GmbH
Am Siebenstein 6-10,
D-63303 Dreieich-Buchschlag,
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122
http://www.fujitsu-fme.com/
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LTD.
#05-08, 151 Lorong Chuan,
New Tech Park,
Singapore 556741
Tel: +65-281-0770
Fax: +65-281-0220
http://www.fmap.com.sg/
F0010
FUJITSU LIMITED Printed in Japan
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The contents of this document may not be reproduced or copied
without the permission of FUJITSU LIMITED.
FUJITSU semiconductor devices are intended for use in standard
applications (computers, office automation and other office
equipments, industrial, communications, and measurement
equipments, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or
where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before
such use. The company will not be responsible for damages arising
from such use without prior approval.
Any semiconductor devices have inherently a certain rate of failure.
You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.