DS07-12556-1E
FUJITSU SEMICONDUCTOR
DATA SHEET
8-bit Proprietary Microcontroller
CMOS
F
2
MC-8L MB89160L Series
MB89163L/165L/P165/W165/PV160
s
DESCRIPTION
The MB89160L series is a line of the general-purpose, single-chip microcontrollers. In addition to a compact
instruction set, the microcontrollers contain a variety of peripheral functions such as an LCD controller/driver,
an A/D converter, timers, a serial interface, PWM timers, and external interrupts.
s
FEATURES
F
2
MC-8L family CPU core
Dual-clock control system
Maximum memory size: 16-Kbyte ROM, 512-byte RAM (Max)
Minimum execution time: 0.95
s/4.2 MHz
I/O ports: Max 54 channels
21-bit time-base timer
8/16-bit timer/counter: 2 or 1 channels
8-bit serial I/O: 1 channel
External interrupts (wake-up function): Four channels with edge detection plus eight level-interrupt channels
8-bit A/D converter: 8 channels
8-bit PWM timers: 2 channels
Watch prescaler (15 bits)
LCD controller/driver: 24 segments
4 commons (Max 96 pixels)
Remote control transmission output
Buzzer output
Power-on reset function (option)
Low-power consumption modes (stop, sleep, and watch mode)
CMOS technology
MB89160L Series
2
s
PACKAGES
(FPT-80P-M05)
(FPT-80C-A02)
(MQP-80C-P01)
80-pin Ceramic MQFP
80-pin Plastic LQFP
80-pin Ceramic QFP
(FPT-80P-M06)
(FPT-80P-M11)
80-pin Plastic QFP
80-pin Plastic LQFP
MB89160L Series
3
s
PRODUCT LINEUP
(Continued)
MB89163L
MB89165L
MB89P165
MB89W165
MB89PV160
Classification
Mass production products
(mask ROM products)
One-time
PROM
product
EPROM
product
Piggyback/
evaluation product
(for development)
ROM size
8 K
8 bits
(internal mask
ROM)
16 K
8 bits
(internal mask
ROM)
16 K
8 bits
(internal PROM, programming
with general-purpose EPROM
programmer)
32 K
8 bits
(external ROM)
RAM size
256
8 bits
512
8 bits
CPU functions
Number of instructions
: 136
Instruction bit length
: 8 bits
Instruction length
: 1 to 3 bytes
Data bit length
: 1, 8,16 bits
Minimum execution time
: 0.95
s/4.2 MHz
Interrupt processing time
: 8.6
s to 137.1
s/4.2 MHz
Ports
I/O port (N-ch open-drain)
: 8 (6 ports also serve as peripherals, 3 ports
are a heavy-current drive type.)
Output ports (N-ch open-drain)
: 28 (16 ports also serve as segment pins, 2 ports
serve as common pins,
2 ports serve as common pins.) *
2
(8 ports also serve as an A/D input)
I/O ports (CMOS)
: 16 (12 ports also serve as an external interrupt)
Output ports (CMOS)
: 2 (Also serve as peripherals)
Total
: 54 (Max)
Timer/counter
8-bit timer operation (toggled output capable, operating clock cycle 1.9
s to 487.6
s)
16-bit timer operation (toggled output capable, operating clock cycle 1.9
s to 487.6
s)
Serial I/O
8 bits
LSB first/MSB first selectability
One clock selectable from four operation clocks
(one external shift clock, three internal shift clocks: 1.9
s, 7.6
s, 30.5
s)
LCD controller/
driver
Common output
: 4 (Max)
*2
Segment output
: 24 (Max)
*2
Bias power supply pins
: 4
LCD display RAM size
: 24
4 bits
Dividing resistor for LCD driving
: Built-in (an external resistor selectability)
A/D converter
8-bit resolution
8 channels
Sense mode (conversion time 11.9
s/4.2 MHz)
Continuous activation by an internal timer capable
Reference voltage input
A/D conversion mode
(conversion time 49.5
s/4.2 MHz
(52 instruction cycles))
A/D conversion mode (conversion time
43
s/ 4.2 MHz (44 instruction cycles))
Part number
Parameter
MB89160L Series
4
(Continued)
*1 : Varies with conditions such as the operating frequency. (The operating voltage of the A/D converter is assured
separately. See
s
ELECTRICAL CHARACTERISTICS.)
*2 : See
s
MASK OPTIONS.
s
PACKAGE AND CORRESPONDING PRODUCTS
: Available
: Not available
Note : For more information about each package, see
s
PACKAGE DIMENSIONS.
MB89163L
MB89165L
MB89P165
MB89W165
MB89PV160
PWM timer 1,
PWM timer 2
8 bits
2 channels
8-bit reload timer operation
(toggled output capable, operating clock cycle: 0.95
s to 124 ms)
8-bit resolution PWM operation (conversion cycle: 243.8
s to 63.9 s)
External interrupt 1
(wake-up function)
4 independent channels (edge selectability)
Rising edge/falling edge selectability
Used also for wake-up from stop/sleep mode.
(Edge detection is also permitted in stop mode.)
External interrupt 2
(wake-up function)
"L" level interrupts
8 channels
Buzzer output
1 (7 frequencies are selectable by the software.)
Remote control
transmission
output
1 (Pulse width and cycle are software selectable.)
Standby modes
Subclock mode, sleep mode, stop mode, and watch mode
Process CMOS
Operating voltage
2.2 V to 3.6 V *
1
2.7 V to 6.0 V
EPROM for use
MBM27C256A-
20TV
Package MB89163L
MB89165L
MB89P165
MB89W165
MB89PV160
FPT-80P-M05
FPT-80P-M06
FPT-80P-M11
FPT-80C-A02
MQP-80C-P01
Part number
Parameter
MB89160L Series
5
s
DIFFERENCES AMONG PRODUCTS
1.
Memory Size
Before evaluating using the piggyback product, verify its differences from the product that will actually be used.
Take particular care on the following points:
On the MB89163L, addresses 0180
H
and later of the register bank cannot be used.
The stack area, etc., is set at the upper limit of the RAM.
2.
Current Consumption
In the case of the MB89PV160, add the current consumed by the EPROM which is connected to the top socket.
When operated at low speed, the product with an OTPROM (one-time PROM) or an EPROM will consume
more current than the product with a mask ROM.
However, the current consumption in the sleep/stop modes is the same. (For more information, see
s
ELEC-
TRICAL CHARACTERISTICS.)
3.
Mask Options
Functions that can be selected as options and how to designate these options vary by the product.
Before using options check
s
MASK OPTIONS.
Take particular care on the following points:
A pull-up resistor cannot be set for P20 to P27, P40 to P47 and P60 to P67 on the MB89P165/W165.
A pull-up resistor is not selectable for P40 to P47 and P60 to P67 if they are used as LCD pins.
Options are fixed on the MB89PV160.
PDF 
ZIP