NEW
150 kV
MICROFOCUS X-RAY SOURCE
L8121-01
FEATURES
APPLICATIONS
q
Focal Spot Size: 5
m (at 4 W)
Providing 5
m focal spot size, for the sealed-off type X-ray
source with built-in power supply. It gives a clear clair-
voyance image despite of higher magnification ratio.
q
Easy Handling
Convenient handling (with no high voltage wiring) since the
air cooled X-ray source and the high voltage power supply
are in one package.
q
Continuous Operation
It allows continuous maximum output, 150 kV and 500
A,
operation.
q
Built-in External Control Function
It is automatically operable from external control since it
has a built-in RS-232C interface.
q
X-ray Non-destructive Test
Printed Circuits
Electronic Components
Semiconductor Devices
Ceramics
Soldered Parts
Rubbers
Combinated Materials
Plastics
New materials
Die casting
q
Multilayer Printed Circuit Board
X-ray InspectionDrilling Instrument
q
Industrial On-line Process Control
and Measurement
q
Industrial X-ray Computer
Tomography System
SPECIFICATIONS
X-ray Tube
Cooling Method
Window Material
Target Material
Cathode Material
Window Position
High Voltage
Power Supply
Operation /Storage
Temperature
Operation/Storage
Humidity
Weight
NOTE:
a
Without moisture condensation.
Sealed Type
Forced Air Cooling
Beryllium (200 mt)
Tungsten
Dispenser Cathode
End-window
Built-in Type
+10
C to +40
C / 0
C to +50
C
85 % RH Max.
a
Approx. 17 kg
Parameter
Description
q
GENERAL
s
X-RAY TUBE UNIT
Function
Protection
External Control
Operation /Storage
Temperature
Operation/Storage
Humidity
Power Consumption
Inter Voltage
Installation Method
Weight
Target Voltage/Current
Pre-set, Auto Warm-up
Safety Interlock
RS-232C
0 to +40
C
85 % RH Max.
a
Less than 240 W
24 Vdc
Designed for both bench-top
and rack mounting
Approx. 5 kg
Parameter
Description
s
X-RAY CONTROL UNIT
Target Voltage
Target Current
Maximum Output Power
Focal Spot Size
Beam Angle
Minimum Distance Focus/Object
Environmental X-ray Dose Leakage
Operation
"S" Small Spot Mode
"M" Middle Spot Mode
"L" Large Spot Mode
Parameter
40 to 150
0 to 500
75
7 (10 W isowatts), 5 (4 W)
20 (30 W isowatts)
50 (75 W)
43
17
5
Continuous
Value/Description
kV
A
W
m
m
m
degree
mm
Sv/h Max.
--
Unit
150 kV MICROFOCUS X-RAY SOURCE
TLSO1042E01
APR. 2000 SI
Printed in Japan (500)
* This product(s) conforms to the EMC directive (89/336/EEC) of the European Union.
* To meet FDA standards, the Interlock-1 circuit incorporates a relay that shuts off the X-ray generation power supply circuit if the circuit is open.
PRE-CAUTION TO USE
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. 2000 Hamamatsu Photonics K.K
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
!
# WARRANTY PERIOD
RELATED PRODUCTS
The C7716 series X-ray image intensifier (I. I.) camera unit now offers greatly
improved X-ray detection efficiency even at low energy levels. This improve-
ment stems primarily from a built-in X-ray image intensifier having an extreme-
ly thin aluminum input window. Its thickness is only 0.3 mm or less, virtually at
the limit of present technology providing excellent X-ray transmit-tance and
low scattering.
The results are sharp, clear, high-quality images taken at low energy X-ray lev-
els down to several keV which penetrate plastic (PET) materials.
X-RAY IMAGE INTENSIFIER CAMERA UNIT
C7716, C7716-10
The C7876 is an X-ray image intensifier camera unit ideal for non-destructive
inspection of light-element materials and radiation imaging at low-energy
X-ray levels.
The C7876 remarkably improves X-ray transmittance at low-energy X-ray lev-
els by using a beryllium window instead of the aluminum window currently
used for most X-ray image intensifiers.
The result is a sharp and clear, high-contrast image taken in real time even at
low energy X-ray levels down to a few keV.
X-RAY IMAGE INTENSIFIER CAMERA UNIT
C7876, C7876-10
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741
HOMEPAGE URL http://www.hamamatsu.com
1. X-ray emitted from this device is harmful for human body. And it should be necessary for the operator to protect himself/herself
from it.
2. During an operation, the X-ray tube unit should be installed in the X-ray shielded cabinet in order to avoid any X-ray leakage.
Also the safety interlock system in X-ray control unit should be always used in order to avoid any misoperation.
This device is guaranteed for one year from data of purchase or 3000 hours of operation, whichever comes first.
The warranty extends only to replacement of the products. The warranty does not cover damage due to misuse or natural galamity.
PDF 
ZIP