ChipFind - документация

Электронный компонент: FH23-17S-0.3SHAW

Скачать:  PDF   ZIP
1
0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors
FH 23 Series
s
Features
1. FPC low insertion force and high holding force
Hirose Electric's unique low insertion force (LIF) design
(patents pending) improves the Flexible Printed Circuit
(FPC) holding force after insertion.
FPC insertion force:Reduced approximately 36%
(as compared with FH18 Series connectors).
FPC holding force:Improvement of approximately 22%
(as compared with FH18 Series connectors).
2. Temporary hold of FPC
There is no need to hold the FPC after insertion in the
connector. The connector will hold it in correct position,
allowing closing of the actuator.
3. Easy board mounting
The surface mounted termination of the contacts is staggered on
0.6 mm centers, positioned on front and back of the connector.
Bottom of the connector is completely insulated, allowing
conductive traces on PCB to run under the connector.
4. Proven Flip-lock Actuator assures easy and
reliable operation
Rotating actuator permits easy insertion and reliable connection
with the FPC. Tactile sensation confirms complete mechanical
locking of the actuator and the electrical connection.
5. Variations to suit different mounting areas
Available with lead and leadless type of terminations
(for opposing FPC insertion side).
6. Designed for placement with automatic equipment
Flat top surface allows pick-up with vacuum nozzles.
Packaged in embossed tape, on reel. One reel contains 2,500 pieces.
7. Accepts 0.2mm thick FPC
8. Variety of contact positions
Available with 15,17,21,23,25,27,31,33,39,45,51,61and 71 pos.
8. Environmental considerations
Plating is lead-free in order to protect environment.
s
Applications
Mobile phones, PDA's, digital cameras, digital video
cameras and other compact devices requiring
interconnections of the main circuit with the LCD,
plasma display (PDP), camera module, or other devices.
q
Staggered termination configuration. Only 1.25 mm above the board.
When the actuator is opened
Temporary hold of FPC
When the actuator is closed
Leadless type
Lead type
1.25mm
Completely enclosed
bottom surface
2004.6
2
100 V DC
90 V AC/one minute
1 mA AC
10 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles,
3 axis.
Acceleration of 981 m/s
2
, 6ms duration, sine half-wave
waveform, 3 cycles, 3 axis.
96 hours at temperature of 40
C and humidity of 90% to 95%
Temperature:-55
/
+15
to +35
/
+85
/
+15
to +35
Time: 30
/
2 to 3
/
30
/
2 to 3 (Minutes)
5 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350
5
for 5 seconds
50 M ohms min.
No flashover or insulation breakdown
100 m ohms max.
*
Including FPC/FFC conductor resistance
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1
s or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1
s. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts dislocation.
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
No deformation of
components affecting performance.
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Durability
4.
(insertion/ withdrawal)
5. Vibration
6. Shock
7. Humidity
(Steady state)
8. Temperature cycle
9. Resistance to
soldering heat
Item
Specification
Conditions
Terminal type
SHW: SMT horizontal mounting type, lead type termination.
SHAW: SMT horizontal mounting type, lead-less type termination.
Plating specifications :
(05)
: Gold plating
(51)
: Tin-lead plating
---------------
s
Materials
s
Ordering information
FH23 - 39S - 0.3 SHW (05)
1
3
4
2
5
Series name : FH23
No. of contacts.
Number of contacts : 15,17,21,23,25,27,31,33,39,45,51,61,71
Contact pitch: 0.3 mm
1
2
3
4
Part
Contacts
Insulator
LCP
LCP
Phosphor bronze
Color:Beige
Color:Black
Tin-lead plating (Note 3)
UL94V-0
Material
Finish
Remarks
s
Product Specifications
Ratings
Current rating
0.3 A DC
Voltage rating
30 V AC
Operating temperature range
-55
to +85
(Note 1)
Operating humidity range
Relative humidity 90% max. (No condensation)
Storage temperature range
-10
to +50
(Note 2)
Storage humidity range
Relative humidity 90% max.
Recommended FPC
Thickness: = 0.2
0.03mm Tin-lead plating (Note 3)
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating
Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage,
shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
5
3
1
2
1
2
Number of contacts indicator
E
(2.84)
(D: FPC insertion area dimensions)
2.45
(0.15)
C
0.6
0.6
B
0.3
A
(0.12)
4.15
0.05MAX.
0.1MAX.
0.05MAX.
0.1MAX.
0.55
0.5
1.25(Including contact ter
minal leads)
1.7
B
Connector Dimensions (Lead Type termination)
Notes
The coplanarity of each terminal lead is within 0.1.
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
1
2
3
Unit: mm
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
Part Number
FH23-15S-0.3SHW(51)
FH23-17S-0.3SHW(51)
FH23-21S-0.3SHW(51)
FH23-23S-0.3SHW(51)
FH23-25S-0.3SHW(51)
FH23-27S-0.3SHW(51)
FH23-31S-0.3SHW(51)
FH23-33S-0.3SHW(51)
FH23-39S-0.3SHW(51)
FH23-45S-0.3SHW(51)
FH23-51S-0.3SHW(51)
FH23-61S-0.3SHW(51)
FH23-71S-0.3SHW(51)
586-1317-0-51
586-1300-7-51
586-1314-1-51
586-1324-5-51
586-1322-0-51
586-1308-9-51
586-1302-2-51
586-1304-8-51
586-1306-3-51
586-1318-2-51
586-1312-6-51
586-1310-0-51
586-1320-4-51
15
17
21
23
25
27
31
33
39
45
51
61
71
1
7
.0
1
7.6
1
8.8
1
9.4
10
.0
10.6
11.8
12.4
14.2
16
.0
17.8
20.8
23.8
1
3.6
1
4.2
1
5.4
1
6
.0
1
6.6
1
7.2
1
8.4
1
9
.0
10.8
12.6
14.4
17.4
20.4
1
4.2
1
4.8
1
6
.0
1
6.6
1
7.2
1
7.8
1
9
.0
1
9.6
11.4
13.2
15
.0
18
.0
21
.0
1
4.83
1
5.43
1
6.63
1
7.23
1
7.83
1
8.43
1
9.63
10.23
12.03
13.83
15.63
18.63
21.63
CL No.
Number of Contacts
A
B
C
D
Lead Type
4
Notes
The coplanarity of each terminal lead is within 0.1.
The contact terminal lead position indicates the dimension from the E surface, the bottom surface of the insulator body.
Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector.
1
2
3
1
2
1
2
0.05MAX.
0.1MAX.
* *
0.05MAX.
0.1MAX.
(2.84)
(D: FPC insertion area dimensions)
2.45
(0.15)
C
0.6
0.6
B
0.3
A
(0.12)
4.15
0.55
1.25
(Including contact ter
minal leads)
1.7
Number of contacts indicator
E
s
Connector Dimensions Diagram (Leadless Type termination)
Unit: mm
Note: Embossed tape reel packaging(2,500 pieces/reel)
Order by number of reels.
Leadless Type
Part Number
FH23-15S-0.3SHAW(51)
FH23-17S-0.3SHAW(51)
FH23-21S-0.3SHAW(51)
FH23-23S-0.3SHAW(51)
FH23-25S-0.3SHAW(51)
FH23-27S-0.3SHAW(51)
FH23-31S-0.3SHAW(51)
FH23-33S-0.3SHAW(51)
FH23-39S-0.3SHAW(51)
FH23-45S-0.3SHAW(51)
FH23-51S-0.3SHAW(51)
FH23-61S-0.3SHAW(51)
FH23-71S-0.3SHAW(51)
586-1316-7-51
586-1301-0-51
586-1315-4-51
586-1325-8-51
586-1323-2-51
586-1309-1-51
586-1303-5-51
586-1305-0-51
586-1307-6-51
586-1319-5-51
586-1313-9-51
586-1311-3-51
586-1321-7-51
15
17
21
23
25
27
31
33
39
45
51
61
71
1
7
.0
1
7.6
1
8.8
1
9.4
10
.0
10.6
11.8
12.4
14.2
16
.0
17.8
20.8
23.8
1
3.6
1
4.2
1
5.4
1
6
.0
1
6.6
1
7.2
1
8.4
1
9
.0
10.8
12.6
14.4
17.4
20.4
1
4.2
1
4.8
1
6
.0
1
6.6
1
7.2
1
7.8
1
9
.0
1
9.6
11.4
13.2
15
.0
18
.0
21
.0
1
4.83
1
5.43
1
6.63
1
7.23
1
7.83
1
8.43
1
9.63
10.23
12.03
13.83
15.63
18.63
21.63
CL No.
Number of Contacts
A
B
C
D
5
0.250.05 (Metal mask)
0.250.05 (Metal mask)
C0.05
0.60.05
0.30.05
0.60.05
B0.05
0.30.05 (Land)
0.30.05 (Land)
(5.4)
1.250.05
0.70.05
3.450.05
(0.1)(5.2)
(0.1)
B
Recommended PCB Land and Metal Mask Dimensions (Lead Type)
0.250.05(Metal mask)
0.250.05(Metal mask)
C0.05
0.60.05
0.30.05
0.60.05
B0.05
0.30.05 (Land)
0.30.05(Land)
(4.8)
1.250.05
0.650.05
2.90.05
(0.1)(4.6)
(
0.1
)
Recommended metal mask thickness: t = 0.1 mm
B
Recommended Land and Metal Mask Dimensions (Leadless Type)
Part Number
FH23-15S-0.3SHW(51)
FH23-17S-0.3SHW(51)
FH23-21S-0.3SHW(51)
FH23-23S-0.3SHW(51)
FH23-25S-0.3SHW(51)
FH23-27S-0.3SHW(51)
FH23-31S-0.3SHW(51)
586-1317-0-51
586-1300-7-51
586-1314-1-51
586-1324-5-51
586-1322-0-51
586-1308-9-51
586-1302-2-51
15
17
21
23
25
27
31
0
3.6
0
4.2
0
5.4
0
6
.0
0
6.6
0
7.2
0
8.4
0
4.2
0
4.8
0
6
.0
0
6.6
0
7.2
0
7.8
0
9
.0
0
4.8
0
5.4
0
6.6
0
7.2
0
7.8
0
8.4
0
9.6
CL No.
Number of Contacts
B
C
G
Lead Type
Leadless Type
Recommended metal mask thickness: t = 0.1 mm
Part Number
FH23-33S-0.3SHW(51)
FH23-39S-0.3SHW(51)
FH23-45S-0.3SHW(51)
FH23-51S-0.3SHW(51)
FH23-61S-0.3SHW(51)
FH23-71S-0.3SHW(51)
586-1304-8-51
586-1306-3-51
586-1318-2-51
586-1312-6-51
586-1310-0-51
586-1320-4-51
33
39
45
51
61
71
0
9
.0
10.8
12.6
14.4
17.4
20.4
0
9.6
11.4
13.2
15
.0
18
.0
21
.0
10.2
12
.0
13.8
15.6
18.6
21.6
CL No.
Number of Contacts
B
C
G
Unit: mm
Part Number
FH23-15S-0.3SHAW(51)
FH23-17S-0.3SHAW(51)
FH23-21S-0.3SHAW(51)
FH23-23S-0.3SHAW(51)
FH23-25S-0.3SHAW(51)
FH23-27S-0.3SHAW(51)
FH23-31S-0.3SHAW(51)
586-1316-7-51
586-1301-0-51
586-1315-4-51
586-1325-8-51
586-1323-2-51
586-1309-1-51
586-1303-5-51
15
17
21
23
25
27
31
0
3.6
0
4.2
0
5.4
0
6
.0
0
6.6
0
7.2
0
8.4
0
4.2
0
4.8
0
6
.0
0
6.6
0
7.2
0
7.8
0
9
.0
0
4.8
0
5.4
0
6.6
0
7.2
0
7.8
0
8.4
0
9.6
CL No.
Number of Contacts
B
C
G
Part Number
FH23-33S-0.3SHAW(51)
FH23-39S-0.3SHAW(51)
FH23-45S-0.3SHAW(51)
FH23-51S-0.3SHAW(51)
FH23-61S-0.3SHAW(51)
FH23-71S-0.3SHAW(51)
586-1305-0-51
586-1307-6-51
586-1319-5-51
586-1313-9-51
586-1311-3-51
586-1321-7-51
33
39
45
51
61
71
0
9
.0
10.8
12.6
14.4
17.4
20.4
0
9.6
11.4
13.2
15
.0
18
.0
21
.0
10.2
12
.0
13.8
15.6
18.6
21.6
CL No.
Number of Contacts
B
C
G
Unit: mm
6
0.6 0.02
0.3 0.07
C0.03
0.30.07
G0.05
0.3
0.15
1.1
0.15
1.3
0.15
2.8
0.15
3.5
0.3
(Area with removed covering layer film)
2-R0.2
0.20.03
( 0.2 )
0.3
0.4
(0.07)
(2)
(0.5)
(0.2)
(0.05)
( 0.1 )
(0.2 conductor width)
(0.1 between conductors)
0.60.02
0.60.07
B0.03
0.30.02
+0.04
-0.03
+0.04
-0.03
4
+0.04
- 0.03
4
Polyamide and thermally hardening adhesive is recommended as the materials for the stiffener.
0.3 also permitted when drawing plated leads.
5
B
Recommended FPC Dimensions
B
Packaging Specification
q
Embossed Carrier Tape Dimensions(Tape width of 24 mm max.)
Unit: mm
120.1
40.1
20.15
1.5
+
0.1
0
1.750.1
H0.3
K0.1
(0.3)
Unreeling direction
(L)
(M)
(N)
(1.7)
(5.1)
(2.45)
(0.85)(0.5)
Flat surface for placement
with Automatic equipment
Part Number
FH23-15S-0.3SHW(51)
FH23-15S-0.3SHAW(51)
FH23-17S-0.3SHW(51)
FH23-17S-0.3SHAW(51)
FH23-21S-0.3SHW(51)
FH23-21S-0.3SHAW(51)
FH23-23S-0.3SHW(51)
FH23-23S-0.3SHAW(51)
FH23-25S-0.3SHW(51)
FH23-25S-0.3SHAW(51)
FH23-27S-0.3SHW(51)
FH23-27S-0.3SHAW(51)
586-1317-0-51
586-1316-7-51
586-1300-7-51
586-1301-0-51
586-1314-1-51
586-1315-4-51
586-1324-5-51
586-1325-8-51
586-1322-0-51
586-1323-2-51
586-1308-9-51
586-1309-1-51
15
15
17
17
21
21
23
23
25
25
27
27
0
5.1
0
5.1
0
5.7
0
5.7
0
6.9
0
6.9
0
7.5
0
7.5
0
8.1
0
8.1
0
8.7
0
8.7
0
4.5
0
4.5
0
5.1
0
5.1
0
6.3
0
6.3
0
6.9
0
6.9
0
7.5
0
7.5
0
8.1
0
8.1
16.5
16.5
16.5
16.5
16.5
16.5
24.5
24.5
24.5
24.5
24.5
24.5
CL No. Number of Contacts
M
0
7.3
0
7.3
0
7.9
0
7.9
0
9.1
0
9.1
0
9.7
0
9.7
10.3
10.3
10.9
10.9
L
0
7.5
0
7.5
0
7.5
0
7.5
0
7.5
0
7.5
11.5
11.5
11.5
11.5
11.5
11.5
K
16
16
16
16
16
16
24
24
24
24
24
24
H
N
Q
Part Number
FH23-31S-0.3SHW(51)
FH23-31S-0.3SHAW(51)
FH23-33S-0.3SHW(51)
FH23-33S-0.3SHAW(51)
FH23-39S-0.3SHW(51)
FH23-39S-0.3SHAW(51)
FH23-45S-0.3SHW(51)
FH23-45S-0.3SHAW(51)
FH23-51S-0.3SHW(51)
FH23-51S-0.3SHAW(51)
586-1302-2-51
586-1303-5-51
586-1304-8-51
586-1305-0-51
586-1306-3-51
586-1307-6-51
586-1318-2-51
586-1319-5-51
586-1312-6-51
586-1313-9-51
31
31
33
33
39
39
45
45
51
51
0
9.9
0
9.9
10.5
10.5
12.3
12.3
14.1
14.1
15.9
15.9
0
9.3
0
9.3
0
9.9
0
9.9
11.7
11.7
13.5
13.5
15.3
15.3
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
CL No. Number of Contacts
M
12.1
12.1
12.7
12.7
14.5
14.5
16.3
16.3
18.1
18.1
L
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
K
24
24
24
24
24
24
24
24
24
24
H
N
Q
7
q
Embossed Carrier Tape Dimensions(Tape width of 32 mm min.)
(380)
(80)
(2)(Q)
(
13
)
End portion
Mounting portion
Embossed carrier tape
Blank portion
Lead portion (400 mm min.)
Top cover tape
(10 pockets min.)
Blank portion
(10 pockets min.)
q
Reel Dimensions
Unit: mm
Part Number
FH23-61S-0.3SHW(51)
FH23-61S-0.3SHAW(51)
FH23-71S-0.3SHW(51)
FH23-71S-0.3SHAW(51)
586-1310-0-51
586-1311-3-51
586-1320-4-51
586-1321-7-51
61
71
32
44
28.4
40.4
14.2
20.2
21.1
24.1
18.9
21.9
18.3
21.3
32.5
44.5
CL No.
Number of Contacts
H
J
K
L
M
N
Q
(0.3)
Unreeling direction
1.5
+0.1
0
1.7
+0.15 0
1.750.1
40.1
20.15
120.1
1.5
+0.10
K0.1
(L)
(M)
(N)
J0.1
H0.3
(2.45)
(1.7)
(5.1)
(0.85) (0.5)
Flat surface for placement
with Automatic equipment
8
B
Recommended Temperature Profile
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-2)
Environment
:Room air
Solder composition
:Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.'s
Part Number: OZ63-201C-50-9)
Test board
:Glass epoxy 45mm100mm1.6mm thick
Land dimensions
:Lead type 0.3mm1.25mm,
0.3mm0.7mm
Leadless type 0.3mm1.25mm,
0.3mm0.65mm
Metal mask
:Lead type
0.25mm1.25mm0.1mm thick
0.25mm0.7mm0.1mm thick
Leadless type
0.25mm1.25mm0.1mm thick
0.25mm0.65mm0.1mm thick
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
HRS test condition
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-2)
Environment
:Room air
Solder composition
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
Part Number: M705-221CM5-42-10.5)
Test board
:Glass epoxy 45mm100mm1.6mm thick
Land dimensions
: Lead type 0.3mm1.25mm,
0.3mm0.7mm
Leadless type 0.3mm1.25mm,
0.3mm0.65mm
Metal mask
: Lead type
0.25mm1.25mm0.1mm thick
0.25mm0.7mm0.1mm thick
Leadless type
0.25mm1.25mm0.1mm thick
0.25mm0.65mm0.1mm thick
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult tour solder paste and equipment
manufacturer for specific recommendations.
Start
Temperature
()
Time (Seconds)
60
25(60 sec.)
(20 sec.
to 30 sec.)
(30 sec.)
60 sec. to 90 sec.
Preheating
Soldering
0
50
100
150
150
160
240
200
5 sec. Max.
200
250
120
q
Using Typical Solder Paste
Max. 250
Start
Time (Seconds)
60
25 (60 sec.)
(60 sec.)
90 sec. to 120 sec.
Preheating
Soldering
0
50
100
150
150
200
230
200
250
120
Temperature
()
q
Using Lead-free Solder paste
9
B
FH23 Series FPC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Covering film layer.
Cover adhesive
Surface treatment
Copper foil
Base adhesive
Base film
Reinforcement material adhesive
Stiffener
Polyamide
1 mil thick.
Tin-lead plating
Cu
1oz
Polyamide
1 mil thick
Heat-hardened adhesive
Polyamide
3 mil thick
Total
25
25
5
35
25
25
30
75
195
Material
Thickness (
m)
2. Using Double-sided FPC
3. Precautions
Material Name
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
Base adhesive
Base film
Base adhesive
Copper foil
Cover adhesive
Covering layer film
Reinforcement material adhesive
Stiffener
Polyamide
1 mil thick
Tin-lead plating
Cu
Cu
1/2oz
Polyamide
1 mil thick
Cu
1/2oz
Polyamide
1 mil thick
Heat-hardened adhesive
Polyamide
1 mil thick
Total
25
25
5
15
18
18
25
18
18
25
25
25
25
199
Material
Thickness (
m)
Note : Recommended specification for FPC 0.2
0.03 mm thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
TEL:+81 3 5462 4191
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
TEL:+81 3 5606 1165
1-5-1, Kiba, Koto-ku, Tokyo, Japan
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
TEL:+81 3 3432 6976/8415
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
FAX:+81 3 3432 3919
10
B
Connector Operating Instructions, precautions and recommendations
2)
The connector will assure reliable performance
when the actuator is open to 90 maximum (see
fig.1) Do not exceed this angle, as this may cause
permanent damage to the connector.
3)
Assure that the FPC is fully inserted parallel to
mounting surface, with the exposed conductive
traces facing down.
1) Do not apply excessive force or use any type of
tool to operate the actuator.
90
Operation
Precautions
FPC conductor surface
1.FPC Termination procedure. Connector
installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed.
NOTE: The FPC must be fully inserted in the con-
nector. If not fully inserted, the actuator will not
close properly. Should this be the case, lift up the
actuator (per Step 2 below) and repeat the process
(starting with Step 1 above)
3) For connectors with multiple contacts, such as 39
and 61 pos. rotate down the actuator pushing at
both ends.
2.FPC Removal
1) Lift up the actuator.
2) Carefully remove the FPC.