ChipFind - документация

Электронный компонент: IA82050-PLC28C-01

Скачать:  PDF   ZIP
IA82050
Data Sheet
ASYNCHRONOUS SERIAL CONTROLLER
As of Production Ver. 01
Copyright
2001
ENG211010326-00
www.innovasic.com
innov
ASIC
Customer Support:
The End of Obsolescence
TM
Page 1 of 11
1-888-824-4184
FEATURES
Form, Fit, and Function Compatible with the Intel
82050 and 82510
Packaging options available: 28 Pin Plastic DIP and 28 Lead Plastic Leaded
Chip Carrier
Asynchronous Serial Channel Operation
Separate Transmit and Receive FIFOs with Programmable Threshold
Programmable Baud Rate Generators up to 288K Baud
Special Protocol Features
- Control Character Recognition
- Auto Echo and Loopback Modes
- 9-Bit Protocol Support
- 5 to 9 Bit Character Format
The IA82050 is a "plug-and-play" drop-in replacement for the original IC. innov
ASIC
produces replacement ICs
using its MILES
TM
, or Managed IC Lifetime Extension System, cloning technology. This technology produces
replacement ICs far more complex than "emulation" while ensuring they are compatible with the original IC.
MILES
TM
captures the design of a clone so it can be produced even as silicon technology advances. MILES
TM
also verifies the clone against the original IC so that even the "undocumented features" are duplicated. This data
sheet documents all necessary engineering information about the IA82050 including functional and I/O
descriptions, electrical characteristics, and applicable timing.

IA82050 Package Pinout
(6)
TXD
(1)
D 4
(2)
D 5
(3)
D 6
(4)
D 7
(5)
INT
(7)
VSS
(8)
X2 or OUT2n
(9)
X1 or CLK
(10)
SCLK or RIn
(11)
DSRn or TA or OUT0n
(12)
DCDn or ICLK or OUT1n
(13)
RXD
(14)
CTSn
28 Pin DIP
IA82050
(28)
D3
(27)
D2
(26)
D1
(25)
D0
(24)
A2
(23)
A1
(22)
A0
(21)
VDD
(20)
RDn
(19)
WRn
(18)
CSn
(17)
RESET
(16)
RTSn
(15)
DTRn or TB
28 Pin LCC
IA82050
(6)
TXD
(5)
INT
(7)
VSS
(8)
X2 or OUT2n
(9)
X1 or CLK
(10)
SCLK or RIn
(11)
DSRn or TA or OUT0n
(25)
D 0
(24)
A2
(23)
A1
(22)
A0
(21)
VDD
(20)
RDn
(19)
WRn
(4)
D7
(3)
D6
(2)
D5
(1)
D4
(28)
D3
(27)
D2
(26)
D1
(18)
CSn
(17)
RESET
(16)
RTSn
(15)
DTRn or TB
(14)
CTSn
(13)
RXD
(12)
DCDn or ICLK or OUT1n
IA82050
Data Sheet
ASYNCHRONOUS SERIAL CONTROLLER
As of Production Ver. 01
Copyright
2001
ENG211010326-00
www.innovasic.com
innov
ASIC
Customer Support:
The End of Obsolescence
TM
Page 2 of 11
1-888-824-4184
DESCRIPTION
The IA82050 is an asynchronous serial controller that provides a CPU interface to one transmit
and one receive channel. It is Form, Fit, and Function compatible with the Intel
82050 and
82510. Configuration registers are used to control the serial channel, interrupts, and modes of
operation. The CPU controls this device via address and data lines with read/write control. The
CPU also uses this interface to read and write data to receive and transmit data through the serial
channel. FIFOs and various serial modes can be used to help off-load the CPU from transmitting
and receiving data. An interrupt line provides an indication to the CPU that the device requires
servicing. The device can be configured for 8250A/16450 compatibility.
Functional Block Diagram
IA82050
BUS INTERFACE
(Reset Logic,
Registers,
Interrupt Generation,
CONFIG., STATUS, RXDATA
TXDATA
TIMING
(Baud Rate
Generators A & B,
Clocking
PIN
CONFIGURATION
RECEIVER
TRANSMITTER
MODEM
TXD
RXD
X2 or OUT2n
SCLK or
RIn
X1 or CLK
RTSn
CTSn
DSRn or TA or OUT0n
DCDn or ICLK or OUT1n
DTRn or TB
A(2:0)
D(7:0)
RDn
WRn
CSn
INT
RESET
IA82050
Data Sheet
ASYNCHRONOUS SERIAL CONTROLLER
As of Production Ver. 01
Copyright
2001
ENG211010326-00
www.innovasic.com
innov
ASIC
Customer Support:
The End of Obsolescence
TM
Page 3 of 11
1-888-824-4184
Functional Overview
Transmitter
The Transmit function consists of a 4
11 bit FIFO, and a Transmit Engine. The 4
11 FIFO is
configurable as any depth between one and four words inclusive. The transmit engine is
responsible for reading the data out of the FIFO and placing it in the proper order on the TXD pin.
The transmit engine is highly configurable to be compatible with numerous formats, including
16450 and 8250 modes of communication. Transmit Communication parameters that can be
programmed include:
Parity modes
Stop Bits
Character Length
FIFO Depth
Clocking Options
RTS and CTS modes
See the Register Description for more details.
Receiver
The Receiver function consists of a 4
11 configurable FIFO and a Receive Engine. The receive
engine is responsible for sampling the data on the RXD input pin, formatting the data, and placing
the data in the FIFO. The receive engine is highly configurable with parameters that include:
Parity modes
Stop Bits
Character Length
FIFO Depth
Clocking Options
Address Matching Options
Control Character Detection
RTS and CTS modes
See the Register Description for more details.
Bus Interface
The Bus Interface is a simple interface that allows a micro-processor or micro-controller to read
and write the IA82050 Registers. It consists of the following I/O lines:
A0, A1, A2 :
3 Bit Address
D0-D7 :
8 Bit Data
RDn:
Active Low Read Enable
WRn:
Active Low Write Enable
CSn:
Active Low Chip Select
INT:
Interrupt Output
RESET:
Chip Reset
IA82050
Data Sheet
ASYNCHRONOUS SERIAL CONTROLLER
As of Production Ver. 01
Copyright
2001
ENG211010326-00
www.innovasic.com
innov
ASIC
Customer Support:
The End of Obsolescence
TM
Page 4 of 11
1-888-824-4184
Register Description
Table 1 IA82050 Register Summary
Register
ADDR
Bank
DLAB
Mode
Default
ACR0
111
00
X
R/W
00000000
ACR1
101
10
X
R/W
00000000
BACF
001
11
0
R/W
00000100
BAH
001
00
1
R/W
00000000
BAL
000
00
1
R/W
00000010
BANK
010
X
X
W
00000000
BBCF
011
11
X
R/W
10000100
BBH
001
11
1
R/W
00000000
BBL
000
11
1
R/W
00000101
CLCF
000
11
0
R/W
00000000
FLR
100
01
X
R
00000000
FMD
001
10
X
R/W
00000000
GER
001
00
0
R/W
00000000
GIR_BANK
010
X
X
R
00000001
GSR
111
01
X
R
00010010
ICM
111
01
X
W
N/A
IMD
100
10
X
R/W
00001100
LCR
011
00
X
R/W
00000000
LSR
101
00
X
R/W
01100000
MCR
100
100
00
01
X
X
R/W
W
00000000
MIE
101
11
X
R/W
00001111
MSR
110
110
00
01
X
X
R/W
R
00000000
PMD
100
11
X
R/W
11111100
RCM
101
01
X
W
N/A
RIE
110
10
X
R/W
00011110
RMD
111
10
X
R/W
00000000
RST
101
01
X
R
00000000
RXDATA
000
00
01
0
X
R
Unknown
RXF
001
01
X
R
Unknown
TCM
110
01
X
W
N/A
TMCR
011
01
X
W
N/A
TMD
011
10
X
R/W
00000000
TMIE
110
11
X
R/W
00000000
TMST
011
01
X
R
00110000
TXDATA
000
00
01
0
X
W
N/A
TXF
001
01
X
W
N/A
IA82050
Data Sheet
ASYNCHRONOUS SERIAL CONTROLLER
As of Production Ver. 01
Copyright
2001
ENG211010326-00
www.innovasic.com
innov
ASIC
Customer Support:
The End of Obsolescence
TM
Page 5 of 11
1-888-824-4184
AC/DC Parameters
Absolute maximum ratings:
Supply Voltage, V
DD
.....................................-0.3V to +6.0V
Input Voltage, V
IN
.......................................-0.3V to V
DD
+0.3V
Input Pin Current, IIN..................................10 mA, 25
C
Operating Temperature Range..........................-40
C to +85C
Ambient temperature under bias................................-40C to +85C
*
Storage temperature......................................................- 55C to +150C
Lead Temperature........................................+300C, 10 sec.
Power dissipation..............................................................155 mW, 125C, 25MHz, 15% Toggle
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. Operating the device beyond the conditions
indicated in the "recommended operating conditions" section is not recommended. Operation at the "absolute maximum ratings" may adversely affect
device reliability.
*
The input and output parametric values in section VII-B, parts 1, 2, and 3, are directly related to ambient
temperature and DC supply voltage. A temperature or supply voltage range other than those specified in the
Operating Conditions above will affect these values and part performance is not guaranteed by innovASIC.