Intel
NetStructure
TM
ZT 8102
Switch and Intel
NetStructure
TM
ZT 8102HA Switch
Intel in
Communications
Product Brief
Product Overview
The Intel
NetStructure
TM
ZT 8102 Switch and
Intel
NetStructure
TM
ZT 8102HA Switch are part
of Intel's line of building blocks designed to meet
the needs of OEMs developing next-generation
Internet and voice communications networks.
Both deliver 16 Gigabit Ethernet ports in a 6U
CompactPCI* form factor.
Optimized for use in popular 14-node slot
systems, the switches are designed to meet
the slot, power and cooling budgets of 10U
and smaller chassis. Chassis management is
achieved through IPMI support, with integrated
temperature and voltage sensors for added
reliability. The single-chip Intel
IXE5416 Media
Switch handles an array of functions that many
other designs must perform in software or by
using multiple chips, including hardware-based
wire-speed L2 switching and L3 routing, L2 and
L3 Class of Service, and multicast support.
This CompactPCI switch is available in either a
standard Layer 3 version--the ZT 8102 switch--
or an enhanced Layer 3 version with high
availability software stack--the ZT 8102HA
switch. The high availability software package
enables switch-to-switch failover for continuous
network availability, while auto-configuration
complements the hot swap capability for ease
of service.
Features
Benefits
14 Gigabit Ethernet ports to the backplane
s
Eliminates cumbersome external wiring to nodes
s
Port count and power optimized for use with a 14-slot chassis
Two fiber SFP ports
s
Reliable, secure Gigabit uplink out the front without the cost of an RTM
10/100/1000 Mb auto negotiation
s
Useable with high-performance or legacy node card
s
Easy upgrade path
Single chip, 32 Gbps switching fabric
s
Enables high-capacity applications, lower power, non-blocking architecture
VLANs
s
Security and partitioning of network
IPMI
s
Robust IPMI for hardware management
LED indicators for all ports
s
At-a-glance visual status indication
Layer 3 routing
s
Simplifies network design, reduces costs
High availability software options
s
Single validated hardware platform serves multiple application needs
Expandable, customizable Linux* OS
s
Application-specific code can be written to run on the switch for
management, availability
16434_ZT8102_PB.qxd 5/23/03 10:22 AM Page 1
Product Brief
Intel
NetStructure
TM
ZT 8102 Switch and Intel
NetStructure
TM
ZT 8102HA Switch
Features included in both the ZT 8102
Switch and ZT 8102HA Switch:
Model
s
14 10/100/1000 backplane ports
s
2 GbE fiber front-panel SFP ports
s
1 10/100 Mbps front-panel out-of-band management port RJ-45
s
1 100 Mbps backplane out-of-band inter-switch fabric link
Hardware
s
64 MB SDRAM
s
32 MB flash
s
Ethernet port link, speed, and activity LEDs for each port
s
Power and hot swap, health, status LEDs
s
RS-232 serial port on the front panel and to backplane
s
IPMB port to the backplane
s
Reset switch
Layer 2 Switching Features
s
32 Gbps non-blocking switching fabric
s
Auto-negotiation for 10/100/1000 Mbps speed
s
Jumbo frames support (9K)
s
802.3ad link aggregation
s
802.1D Spanning Tree
s
802.1Q, port-based VLANs
s
Broadcast storm control
s
IEEE 802.3x flow control (full-duplex)
s
Back pressure flow control (half-duplex)
s
GVRP, GMRP
s
IGMPv2 Snooping
Layer 3 Routing Features
s
Hardware-based Layer 3 wire-speed routing
s
DVMRP
s
Default initialization scripts for L2/L3 operation
s
RIPv1/v2
s
DHCP/BootP relay
s
OSPF
Traffic Classification and Priority Queues
s
802.1p
s
Destination or source MAC address
s
Destination or source IP address
Management Functions
s
IPMI support
s
RS-232 port for out-of-band management system and diagnosis
s
Telnet console
s
SNMPv1, SNMPv3
s
RMON statistics, history, alarm and event groups
s
Web-based management
s
TFTP/FTP
s
BootP/DHCP client
s
IP filtering on management interface
s
Password enabled
s
Two copies of OpenArchitect* image in flash
s
Port mirroring
s
Ability to run customized Linux applications
Additional features included in the
ZT 8102HA Switch:
High Availability Support
s
OpenArchitect/HA Suite from ZNYX* Networks
s
Switch-to-switch failover
s
Automatic reconfiguration after hot swap
s
Active/active or active/standby capable
s
VRRP
Specifications
The ZT 8102 switch and ZT 8102HA switch are designed to be compliant with the
following CompactPCI specifications: PICMG* 2.0 R3.0, PICMG 2.16, PICMG 2.1 R2.0,
PICMG 2.9, R1.0, PICMG 2.10, R1.0
Power Requirements
Typical
s
Supply Voltage, Vcc
+5VDC +5%, -3%
s
Supply Current, Vcc=5.0VDC
6.15A
s
Supply Voltage, V3.3V
+3.3VDC +5%, -3%
s
Supply Current, V3.3V=3.3VDC
9.13A
s
Supply Voltage, V12.0V
+12VDC 5%
s
Supply Current, V12V=12.0VDC
660mA
s
Less than 69W power consumption
Mechanical
s
Measures 9.2" x 6.3" (233.35 mm x 160 mm)
s
Connector: IEC-1076-4-101 (J1-J5)
s
Width: 0.8" (1 slot - 4HP)
Environmental
s
Operating temperature (requires 300 LFM airflow): 5 C to 55 C
s
Storage temperature: -40 C to +70 C
s
Non-condensing relative humidity: less than 95% at 40 C
s
Designed for NEBS Level 3
s
MTBF > 80K hrs
Emission (EMI) Certifications
s
FCC Class A
s
CE Mark
s
ICES
s
VCCI
Safety Certifications
s
UL/CUL
s
IEC60950/EN60950
Order Options
s
ZT 8102 Switch
s
ZT 8102HA Switch
For more information, visit the Intel Web site at:
developer.intel.com
UNITED STATES AND CANADA
Intel Corporation
Robert Noyce Bldg.
2200 Mission College Blvd.
P.O. Box 58119
Santa Clara, CA 95052-8119
USA
EUROPE
Intel Corporation (UK) Ltd.
Pipers Way
Swindon
Wiltshire SN3 1RJ
UK
ASIA-PACIFIC
Intel Semiconductor Ltd.
32/F Two Pacific Place
88 Queensway, Central
Hong Kong, SAR
JAPAN
Intel Kabushiki Kaisha
P.O. Box 115 Tsukuba-gakuen
5-6 Tokodai, Tsukuba-shi
Ibaraki-ken 305
Japan
SOUTH AMERICA
Intel Semicondutores do Brazil
Rue Florida, 1703-2 and CJ22
CEP 04565-001 Sao Paulo-SP
Brazil
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not
intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
All OpenArchitect/HA trademarks are used under the license and are trademarks or registered trademarks of ZNYX Networks, Inc. in the United States and other countries.
Products bearing the OpenArchitect trademarks are based upon an architecture developed by ZNYX Networks, Inc.
* Other names and brands may be claimed as the property of others.
Copyright 2003, Intel Corporation. All rights reserved.
Intel, NetStructure and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Printed in USA.
0503/OC/DC/PP/500
Please Recycle
251657-002
Intel Access
Developer's Site:
developer.intel.com
Embedded Intel Architecture Homepage:
www.intel.com/design/intarch
Intel Technical Documentation Center:
www.intel.com/go/techdoc
General Information Hotline:
(800) 628-8686 or (916) 356-3104 5 a.m. to 5 p.m. PST
16434_ZT8102_PB.qxd 5/23/03 10:22 AM Page 2
PDF 
ZIP