Introduction
Designed to the PICMG* 2.16 specification, this
processor board offers excellent value with an
optimized feature set to support a broad range of
telecom and Internet applications. Modular and
standards-based, the Intel
NetStructure
TM
ZT
5504 System Master Processor Board supports
efficient time-to-market development. It is
validated with the Intel
NetStructure
TM
family
of packet switched backplane (PSB) products,
and is designed to interoperate with third-party,
PICMG 2.16-compliant components.
The ZT 5504 board can function as a system
master processor in a CompactPCI* multi-
processing system. It interfaces to the backplane
through a transparent, PCI-to-PCI (P2P) bridge,
allowing it to communicate directly with all
peripheral CPU boards via the CompactPCI bus.
Optionally, it can operate in drone mode, thus
permitting its use as a stand-alone computer.
On-board logic qualifies the location of the
board when inserted into a peripheral slot,
thereby isolating it from the bus.
The PICMG 2.16 CompactPCI Packet Switching
Backplane Specification is designed to accelerate
the convergence of telecom and Internet IP-based
applications. Standards-based modular design
simplifies development, and all slots are served
by redundant fabric connections, supporting
system failover in the event of a fabric failure.
Backplane interconnect speeds are user-definable
and scalable from 10 Mbps to 2000 Mbps per
node slot.
Highlights
Computing Core
I
1 GHz Intel
Pentium
III processor -- Low
Power (BGA2) with 100 MHz processor side
bus and 256 Kb L2 cache
I
512 Mb to 1 Gb ECC SDRAM with L1 and
L2 cache memory
I
Intel
440 GX chipset
Peripherals and I/O
I
64-bit/33 MHz CompactPCI interface
I
4 Mb on-board flash memory to support
embedded applications
I
20 Gb EIDE hard drive and PMC site; optional
CompactFlash* carrier mezzanine card available
in lieu of hard drive
I
On-board 10/100 Mb Fast Ethernet
LAN interfaces
I
Optional CD-ROM drive mezzanine simplifies
installation of software
I
Universal Serial Bus (USB)
I
On-board SVGA-compatible CHPS
69000 graphics controller with front-plate
video connectors
I
On-board, two stage programmable watchdog
timer (1s, 8s, 64s, 256s) generates non-
maskable interrupt (NMI or processor "INIT")
followed by a hardware reset
Intel
NetStructure
TM
ZT 5504
System Master Processor Board
Intel in
Communications
Product Brief
Product Brief
Intel
NetStructure
TM
ZT 5504 System Master Processor Board
Manageability
I
Features integrated IPMI-based Baseboard Management Controller (BMC)
I
Designed to PICMG 2.9 standards
I
Supports comprehensive, protected lights-out management scheme
(with the Intel
NetStructure
TM
ZT 7102 Chassis Management Module)
I
Designed to IPMI 1.0 specifications for standards-based management
and increased reliability
Ethernet
I
Two Ethernet ports deliver high networking performance
I
Can be routed to rear panel through BIOS setup configuration
I
Auto-configuring RJ-45 front-panel connectors
I
Link and activity status LEDs
Software and Support
I
Embedded BIOS loaded in on-board flash
I
User-configurable BIOS to boot an operating system residing in local
flash memory, from a fixed or floppy drive, or over a network
I
PC compatible to run operating systems developed for the PC
I
Enhanced support provided for Windows* 2000, Linux*,
and VxWorks*
I
Additional drivers for select peripherals and flash drives
Please reference the most up-to-date Order Configurations
and Regulatory Compliance specifications along with
additional product information at
developer.intel.com/design/network/products/cbp/zt5504.htm
Intel Access
Networking and Communications Building Blocks:
developer.intel.com/design/network
Other Intel Support:
Intel Literature Center developer.intel.com/design/litcentr/
(800) 548-4725 7 a.m. to 7 p.m. CST (U.S. and Canada)
International locations please contact your local sales office.
General Information Hotline:
(800) 628-8686 or (916) 356-3104 5 a.m. to 5 p.m. PST
For more information, visit the Intel Web site at:
developer.intel.com
UNITED STATES AND CANADA
Intel Corporation
Robert Noyce Bldg.
2200 Mission College Blvd.
P.O. Box 58119
Santa Clara, CA 95052-8119
USA
EUROPE
Intel Corporation (UK) Ltd.
Pipers Way
Swindon
Wiltshire SN3 1RJ
UK
ASIA-PACIFIC
Intel Semiconductor Ltd.
32/F Two Pacific Place
88 Queensway, Central
Hong Kong, SAR
JAPAN
Intel Kabushiki Kaisha
P.O. Box 115 Tsukuba-gakuen
5-6 Tokodai, Tsukuba-shi
Ibaraki-ken 305
Japan
SOUTH AMERICA
Intel Semicondutores do Brazil
Rue Florida, 1703-2 and CJ22
CEP 04565-001 Sao Paulo-SP
Brazil
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not
intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
* Other names and brands may be claimed as the property of others.
Copyright 2003, Intel Corporation. All rights reserved.
Intel, the Intel logo, NetStructure and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Printed in USA.
0203/OC/DC/PP/2.5K
Please Recycle
252257-001
Specifications
The ZT 5090 platform is designed with the following standards:
I
CompactPCI Core Specification, PICMG 2.0 R2.1
I
CompactPCI Hot Swap, PICMG 2.1 R2.0
I
CompactPCI Computer Telephony, PICMG 2.5 R1.0
I
CompactPCI System Management, PICMG 2.9
I
CompactPCI Power Interface, PICMG 2.11
I
CompactPCI Packet Switching Backplane Specification, PICMG 2.16
I
IPMI 1.0 Specification
Power Req.
Typical
Supply Voltage, Vcc
+5VDC +5%, -3%
Supply Current, Vcc=5.0VDC
4A
Supply Voltage, V3.3V
+3.3VDC +5%, -3%
Supply Current, V3.3V=3.3VDC
6A
Supply Voltage, V12.0V
+12VDC 10%
Supply Current, V12V=12.0V
20mA
Mechanical
I
Measures 9.2" x 6.3" (233.35 mm x 160 mm)
I
Width: 0.8" (1 slot - 4HP)
I
Connector: IEC-1076-4-101 (J1-J5)
Environmental
I
Operating Temperature (requires 200 LFM airflow): 0 to 50 C
I
Storage Temperature:
(with hard disk) -40 to +65 C
(without hard disk) -40 to +85 C
I
Non-Condensing Relative Humidity: less than 95% at 40 C
Peripherals and I/O Interfaces
I/O Interface
Front Panel
Rear Panel
Compatibility
COM 1
RJ-45
J5
16550
COM 2
N/A
J5
16550
LPT 1
N/A
N/A
IEEE* 1284
VGA 15-pin
D-shell
J5 with
AGP
Keyboard N/A
J5
PS/2-style
Mouse N/A
J5 PS/2-style
Floppy N/A
J5 PC/AT
EIDE 2.5"
J5 ultra
DMA/33
Ethernet RJ-45
J3
Intel
82559
USB 0
4-pin USB
J5
USB Type A
USB 1
4-pin USB
J5
USB Type A
The ZT 5504 may be configured with a companion rear-panel transition
board (ZT 4807), specifically designed to support the available I/O signals.
PDF 
ZIP