www.ittcannon.com

167

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

How to Order

ITT Cannon is the foremost manufacturer of MS and
MS type connectors with the widest range of
connector styles, sizes and variations in the indus-
try. These connectors utilize the finest materials,
which, along with precision manufacturing and rigid
quality control, assure ITT Cannon customers of the
finest quality connectors.
These circular connectors were originally designed
for aircraft, but are now widely used in many other
fields. They are particularly suitable for commercial
applications requiring low cost and high reliability.

ENVIRONMENTAL RESISTANT MS-E, MS-F,
MS-R AND F80 (Solder/Crimp Termination)
MS-E, MS-F and MS-R are similar to MS-A and
MS-B connectors but have resilient insulators and
wire sealing grommets for extreme environmental
conditions and high altitude sealing. MS-E's and
MS-F's have a mechanical cable clamp; the MS-R
has a shorter, lighter weight endbell without the
cable clamp. Both the MS-F and MS-R have 0 rings
to supplement the interfacial seal. Shells are alumi-
num alloy. Contacts are siliver plated copper alloy.
The F80 modification (crimp contact termination) is
available in E, R, F and BFR styles with resilient
insulators.

In the latest revision of MIL-C-5015, a new class of
environment-resistant connectors was added. This
new class F connector supersedes the previous
class E connector. The MS3106F is identical to the
MS3106E except that the MS3106F has an "0"
ring under the coupling nut. The class E will still be
available upon request for exitsting programs, and
upon ordering will also bear the E nomenclature on
the shell.
MS-F and MS-R connectors are designed to operate
in the extreme environmental conditions of high
altitude filight and must be completely sealed to
withstand moisture, condensation, vibration, corona
and flashover caused by high altitude environments.
They have resilient grommet with internal restric-
tions in the wire cavities which act as 0 rings
around the wires. This allows the wires to slide thru
the grommet with a minimum of friction, yet when
the ferrule is seated and the endbell tightened it
provides a perfect wire seal thru a wide variety of
wire diameters. This seal at the rear, plus the
interfacial seal at the front, effects a completely
environment-resistant asssembly when the plug is
mated to and F or R receptacle. Sockets are of the
closed-entry type.
The temperature range for this connector is -55°C
(-67°F) to +125°C (+257°F) and meets the
requirements of MIL-C-5015.
The F80 modification (crimp contact termination) is
avialable in resilient insulators in the E, R, F, and
BFR styles, creating a large selection of insert
assemblies and hardware. Components are identical
to the MS-5015 except that the contacts are
modified for crimp termination providing and in-
expensive crimp contact connector with the proven
reliability of and complete intermateability with the
MS-5015 series. See page 187 for assembly in-
structions. Cable clamps have been integrally de-
signed with the endbell on MS-E and MS-F connec-
tors. Class R is without the cable clamp.

POTTING ER CONNECTORS (Solder Contact
Termination)
These lightweight potting connectors provide re-
sistance to salt water, fuels, etc., and will with-
stand the effects of high vibration. 3100 and 3106
connectors with plastic potting cups and resilient
inserts meet the requirements of MS3103 and
MS25183. Contacts are silver plated copper or
brass. ER insulators are resilient; shells are alumi-
num alloy. A 90° plug (3108ER) is also available.

ACCESSORIES
Accessories to fit MS connectors include junction
shells, protective caps, dummy or stowage recepta-
cles, cable clamps, telescoping bushings.

PREFIX

CA
MS

3106
3106

R
R

20
20

27
27

P
P

W
W

*
-

-
-

PREFIX

MS - Conforms to latest MIL-C-5015 revision
CA - Cannon designation (for any modification)

Coupling thread diameter in sixteenths of an inch

See pages 171-174

P for Pin; S for Socket

W, X, Y and Z (omit for "Normal")

(applies to CA numbers only, not MS)
F80 - Crimp type contacts. See page 187 for
assembly instructions.

3100 - Wall mounting receptacle
3101 - Cable connecting plug
3102 - Box mounting receptacle
3106 - Straight plug
3108 - 90° angle plug

E/F - Environmental with resilient insulators
and integral cable clamp.
R - Environmental with resilient insualtors
and shortened light weight endbell; also
additional sealing with 0 ring seal under
coupling nut in styles 3106 and 3108

When ordering MS3106F to the Cannon part number, designate
CA06R. See pages 177 and 181.

SHELL STYLE

CLASS

SHELL SIZE

CONTACT ARRANGEMENT

CONTACT ARRANGEMENTs

CONTACT TYPE

ALTERNATE INSERT POSITION

MODIFICATION CODE

www.ittcannon.com

168

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Performance and Material Specifications

High Voltage Cartridges for MS-E and MS-R (HV310*E/R Series)

For class E, R and F connectors, satisfactory mois-
ture sealing will be obtained if AWG and MS wire
sizes and insulation outside diameters are governed
by this table.

Test current ratings of contacts and allowable
voltage drop under test conditions when assembled
as in service are shown below. Maximum total
current to be carried per connector is the same as
the allowable in wire bundles as specified in MIL-
W-5088.

Pin and socket contacts are designed to resist severe vibration and repeated connection and disconnection.
The average force to either engage or separate pin and socket contacts will not exceed the average values
given in the latest revision of MIL-C-5015.

Sizes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in
ITT Cannon connectors. These thermocouple contacs maintain continuity from thermal-sensor leads thru a
bulkhead of other closures in temperature measuring applications.
These contacts for matching lead wires are detailed by the standards of the Instrument Society of America
(I.S.A);

Since the thermocouple connector applications determines the soldering methods and materials to be used,
thermocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots.
Thermocouple contacts are supplied only in connectors having resilient insulators.

MS connectors show no evidence of breakdown when the test voltage given below is applied between the
two closest contacts and between the shell and the contacts closest to the shell for a period of one minute.

MATERIALS AND FINISHES

ELECTRICAL SERVICE DATA

WIRING

CONTACTS

THERMOCOUPLE CONTACTS

HIGH POTENTIAL TEST VOLTAGE

Shell

Contact

Size

Test Current

(amps)

Potential Drop

(millivolts)

Contact Size

FORCE

In lbs.

Material
Finish

Aluminum alloy
O.D. Chromate coating

over cadmium plating

Polychloroprene (resilient)

Brass or copper alloy

Silver plate

Tinned solder pot

150

Maximum

Average

Minimum

3.00

2.10

.25

J and Y

Inst.

* As indicated in previous MS Specification and to be used by designer only as a guide.

Standard contact arrangements are adaptable to
high voltage applications.
Eliminates need for a separate high voltage
connector.
Assembly time is reduced.

1000

2000

2800

3500

4500

7000

250

700

1250

1750

2450

4200

200

500

900

1250

1750

3000

1/16

1/8

3/16

1/4

5/16

1/16

1/8

3/16

1/4

5/16

Iron and constantan

Chromel and alumel

Copper and constantan

5.00

3.50

.50

10.00

7.00

.75

15.00

10.50

1.00

20.00

14.00

2.00

16 thru 20

12 thru 14

8 thru 10

4 thru 6

0 thru 2

.064 (1.63) min. to .130 (3.30) max.

.114 (2.90) min. to .170 (4.32) max.

.164 (4.17) min. to .255 (6.48) max.

.275 (6.98) min. to .370 (9.40) max.

.415 (10.54) min. to .550 (13.97) max.

Material

Finish

Termination

I.S.A Standards

Service

Rating

Suggested *

Operating Voltages

AC (rms)

Test

Voltage

(RMS]

60 cps

Air

Spacing

Nom.

(inches)

Creepage

Distance

Nom.

(inches)

Material

Contact Sizes

Wire Size

(MIL-W-5086)

Insulation OD Limit

(inches)

Insulator

Contacts

High voltage conductors as well as power and/or
control signal conductors can now be connected
simultaneously in standard MS connectors. Previ-
ously, MS connectors involved in high voltage cir-
cuitry required individual design considerations and
could only be ordered as a "special." The new high
voltage cartridge allows conversion of a standard
connectors to one capable of handling up to 15,000
volts DC (Test Voltage - mated), operating voltage
- See level 5,000 VDC or 3,500 VAC. These
cartridges are molded of nylon and provide as high
degree of arc-over protection between adjacent
contacts or between a contact and the connector
shell. Unmated, each cartridge provides a nylon
isolating barrier capable of withstanding up to
10,000 volts DC (or peak).

The contact within the cartridge is a 7.5 amp. size
20, crimp snap-in type with dielectric rear release
clip retention. This contact is removable with the
plastic CIET20 insertion/extraction tool provided
the insulation is .084 (22.45) or less. The contact
may be crimped with the standard MS-3191 tool
and MS-3191-20A locator and hand inserted into
the nylon cartridge. The cartridge body is installed
in the connector at the factory.
High voltage cartridges now available fit the space
normally occupied by a #4 o #8 size contact in an
MS-E, MS-R or MS-F type connector.
Over forty-nine contact arrangements are currently
available in which these high voltage cartridges may
be used. Contsult factory for ordering information.

www.ittcannon.com

169

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

MS Alternate Insert Positions

Normal Position

Shell

Size

A
A

A
A
A

D(G)

A(all others)

A
A
A

A(A-L),B(R)

D(M-P)

A(C,E,G,J,K,L)

B(H,M), D(A,B)

A
D

E(A)

D(all others)

Inst. (A,B,h,j)

A(all others)

A(B,C)

D(A)

A
A

A
D

D (m)

A(all others)

D
A

E
E
E
B
D

A(A-D)

D(E)

A(A-C,E,F)

E(D)
D(A)

A(all others)

A(C-E)

D(all others)

A
A
A

D(H)

A(all others)

D(J)

A(all others)

D
A

D(A,G,H)

A(all others)

A
A
A

D
E

Inst.

D)A,E,J)

A(all others)

A
A
A

-
-
-
-

145

215

290

-
-
-
-

90
70

120
110

180
145

240

-
-

270
215

-
-
-
-
-

290

35
35

110

180

110
110

250

270

250
250

325

-
-

325
325

80
35
70
90

110
145
180
170

250
215
270
265

280
325
290

-
-

35
35
80

-
-

80
80

-
-

145

110
110
110

-
-

110

120
170

110

120
120
145

215

250
250
250

-
-

250

240
265

250

240
240
215

290

325
325
280

290

280

-
-

280
280

-
-

290

70
45
80

80
80

145
110
110

110

180

110

180

215
250
250

250

270

250

270

290

280

280
280

325

D
D
A

A
A

Inst.
Inst.
Inst.

A
A
A

A
A
A
A

A
D
A
A
A

A(B,C,F,G)

Inst.(all others)

D
D
D

B
A

Inst.

A
A
A
A

A
A
D
D
D
D

A(C-F)

D(A,B,G,H)

Inst.

A
A

1 #16
1 #16
2 #16
3 #16

1 #12

1 #16
2 #16
1 #8
3 #16
4 #16
5 #16
6 #16
3 #16
2 #16

2 #16
2 #12
3 #12
1 #4
2 #12
2 #12

7 #16
2 #16
3 #16
3 #16
5 #16

10 #16

2 #12
4 #16
1 #16
2 #12
1 #8
7 #16
1 #12
5 #16
2 #12
4 #12
5 #12
6 #16
3 #12
1 #8
4 #12
10 #16
3 #16
1 #0
3 #12
4 #12
8 #16

4 #16
2 #8
3 #12
2 #8
7 #12
7 #16
2 #12
1 #16
5 #12
6 #16
3 #12
3 #8

8S-1

20-22

20-23
20-24

20-27
20-29
20-33

All views are looking into front of pin insert of rear of socket insert.

28-10

28-11

28-12
28-15
28-16
28-17

28-19

28-20

28-21
28-22

32-1

32-6

32-7

32-8

32-9

32-15

32-17

36-4

36-5
36-6

36-7

36-8

36-9

36-10
36-14

36-15

40-10

40-56
44-1

48-5

3 #12
2 #8
2 #4
18 #16
4 #12
26 #16
35 #16
20 #16
15 #16

6 #16
4 #12
4 #16
10 #16
37 #16
3 #16
3 #4

3 #12
2 #0
16 #16
2 #12
3 #8
2 #4
28 #16
7 #12
24 #16
6 #12
12 #16
2 #4
2 #0
6 #12
4 #4

3 #0

4 #0
4 #4
2 #0
40 #16
7 #12
46 #16
1 #12
14 #16
14 #12
2 #8
1 #4
48 #16
6 #16
5 #12
5 #8
35 #16

16 #16
9 #8
4 #4
85 #16
36 #16
6 #12
90 #16
1 #8
9 #12

90
80
80
80

80
70

-
35

80
90

72
65

110

180
110
110
110

110

110
145

110

125

110

145

120
110

110

125

125
180

125

144
125

125

250

270
250
250
250

250

250
215

250

235

250

215

240
250

250

235

235
270

245

225

216
225

225

280

-
280
280
280

280

280
290

280

290

-
325

280

280
-

305

310

288
310

310

3 #16
3 #8
2 #8
2 #16
2 #8
14 #16
17 #16
11 #16

35
35

35
80
-

110

110
110

110
-
-

250

250
250

250
-
-

280

325
325

325
280
-

145
110

110

-
145
110
110
110

110

-
110

110

110
110
110
-

215
250

250

-
215
250
250
250

250

-
250

250

250
250
250
250

250

-
110
110

110

110
-
110

110

110
-
110

-
250
250

250

250
-
250

250

250
-
250

110

110
110

250

250
250

290
325

325

280

-
290
325
325
280

325

280
280

280

280
325
-
-

280

280
280
280

280

325
280
325

280

-
280
280

280

325

325
280

70
35

-
70
35
35
80

80
80

80
35
-
35

80
80
80

35
80
35

45
80
80
80

35
80

3 #8
2 #12
2 #8
4 #16
2 #12
1 #16
2 #8
1 #0
3 #12
4 #16
2 #16
3 #16
2 #8
1 #16
4 #12
19 #16
1 #16
5 #12
8 #16
1 #12
8 #16

14 #16
9 #16
4 #8
8 #12

8 #16
1 #8
7 #12

7 #12
16 #16
8 #12

14 #16
2 #12
2 #4
7 #8
6 #12
3 #8
3 #12
2 #4
9 #16
2 #12
4 #8
7 #16
24 #16

6 #12
3 #8
12 #16
2 #12
2 #4
6 #16
6 #12

22-2
22-4

22-5

22-6

22-7
22-9
22-10
22-11
22-12

22-13

22-14
22-15

22-17

22-18

22-19
22-20
22-22
22-23

22-27

22-28

24-2
24-5
24-6

24-7

24-9
24-10
24-11

24-12

24-20

24-22
24-27
24-28

28-1

28-2

28-7
28-9

10S-2
10SL-4
10SL-3

12-5

12S-4
12S-3

14-3

14S-1
14S-2
14S-5
14S-6
14S-7
14S-9
16-9

16-10
16-12
16-11
16-13

16S-1
16S-4
16S-5
16S-6
16S-8
18-1

18-3
18-4
18-5

18-7
18-8

18-9

18-10
18-11
18-12
18-13

18-15
18-19
18-22
20-2
20-3
20-4
20-7

20-8

20-14

20-15
20-16

20-17

20-18

20-19

* Not MSA/B insert arrangements and polarization.

*
*

10S

12
12S

14
14S

16S

Wire

Size

Service Rating

Alternate Positions-Degrees

Contact

Arrange-

ment

Shell

Size

Wire

Size

Service Rating

Alternate Positions-Degrees

Contact

Arrange-

ment

Shell

Size

Wire

Size

Service Rating

Alternate Positions-Degrees

Contact

Arrange-

ment

Position W

Position X

Position Y

Position Z

20
17
12

8,13

22
19

5,3

21
18
16
14

www.ittcannon.com

170

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

ITT Cannon Designated Alternate Insert Positions

Not MS approved

NOTE: Front view of pin insulator rotates as shown.

Note: For ITT Cannon contact arrangements not listed, consult factory.

Shell

Size

10SL

12S

32A10
32A47

36A16
36A34
36A46
36A66

40A27
40A33

10SLA4

12SA10

20A37

24A24

28A16

28A51

54 #16

47 #16
18 #12
52 #16
27 #12
52 #16

4 #12

60 #16

7 #8
6 #4

5 #20

4 #16

4 #8

12 #12

5 #16

4 #4

43 #16

A
A

A
A
A
A

Normal

Position

Angle

(degrees)

260

110

use pos. 3

250

280

105

100

use pos. 8

120

130

150

195

220

255

290

165

330

235

125

A
A

Inst.

3
3

3
3
3
3

4
4

4
4
4
5

5
5

5
5
5
8

8
8

8
8
8
9

22
13

9
9

9
9
9

12
12

12
12
12
17

13
13

13
13
13
18

15
20

2
2

2
2
2
2

4
2

Wire

Size

Service

Rating

Available Position

Contact

Arrange-

ment

www.ittcannon.com

171

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Contact Arrangements (Face View Pin Insert)

LEGEND

Resilient only
Resilient & Plastic

Shell Size
No. of Contacts
Service Rating

8S-1

1 #16

10S-2

1 #16

10SL-4

2 #16

10SL-3

3 #16

10SLA4

5 #20

12S-4

1 #16

12-5

1 #12

12S-3

2 #16

12SA10

4 #16

Inst.

14-3
1 #8

14S-9

2 #16

16-13
2 #12

(A-Iron

B-Constantan)

16S-4

2 #16

16-11
2 #12

16-12

1 #4

14S-6

6 #16

Inst.

14S-5

5 #16

Inst.

14S-2

4 #16

Inst.

14S-7

3 #16

14S-1

3 #16

16S-5

3 #16

16S-6

3 #16

16-10
3 #12

16-9

2 #16 (B,D)
2 #12 (A,C)

16S-8

5 #16

16S-1

7 #16

18-7
1 #8

18-3

2 #12

18-12
6 #16

18-11
5 #12

18-15
4 #12

(A, C-Iron;

B, D-Constantan)

18-13

3 #12 (B,C,C)

1 #8(A)

18-10
4 #12

18-4

4 #16

18-22
3 #16

18-5

1 #16(A)

2 #12(B,C)

18-9

5 #16(B,C,E-G)

2 #12(A,D)

Inst.

18-8

7 #16(A-G)

1 #12(H)

18-1

10 #16

A(B,C,F,G)

Inst. (all others)

18-19

10 #16

20-2
1 #0

20-23

2 #8

20-3

3 #12

20-19

3 #8

20-15
7 #12

20-22

3 #16(B,D,F)

3 #8(A,C,E)

20-17

1 #16(F)

5 #12(A-E)

20-8

4 #16(B,C,E,F)

2 #8(A,D)

Inst.

20-14

3 #12(C,D,E)

2 #8(A,B)

20A37

ITT Cannon pos.

#8 of 20-4

20-24

2 #16 (A,C)

2 #8 (B,D)

20-4

4 #12

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

High Volume Layouts - readily
available from Cannon Distributors

www.ittcannon.com

172

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Contact Arrangements (Continued)

LEGEND

Resilient only
Resilient & Plastic

Shell Size
No. of Contacts

Service Rating

20-7

8 #16

A(C-F)

D(A,B,G,H)

20-16

7 #16(A-G)

2 #12(H,I)

20-18

6 #16(A,C-E,G,H)

3 #12(B,F,I)

20-33

11 #16

20-11

13 #16

Inst.

20-27

14 #16

20-29

17 #16

22-7
1 #0

22-12

3 #16(A,C,D)

2 #8(B,E)

22-22

4 #8

22-10
4 #16

22-4

2 #12(A,C)

2 #8(B,D)

22-9

3 #12

22-6

1 #16(B)

2 #8(A,C)

22-2
3 #8

22-11
2 #16

22-13

1 #16(E)

4 #12(A-D)

A(A-D), D(E)

22-5

4 #16(A,C,D,F)

2 #12(B,E)

22-15

1 #16(D)

5 #12(A-C,E,F)

A(A-C,E,F),E(D)

22-28
7 #12

22-18
8 #16

A(C-E)

D(all others)

22-23
8 #12

D(H)

A(all others)

22-17

8 #16(A-D,F-J)

1 #12(E)

D(A), A(all others)

22-20
9 #16

24-10

7 #8

24-2

7 #12

24-12

3 #12(B,D,E)

2 #4(A,C,)

24-22

4 #8

24-9
2 #4

22-14

19 #16

22-19

14 #16

22-27

8 #16(A-H)

1 #8(J)

D(J), A (all others)

24-27
7 #16

24-6

8 #12

D(A,G,H)

A(all others)

24-11

6 #12(A-C,G-I)

3 #8(D-F)

24-20

9 #16(A-D,G-L)

2 #12(E,F)

24-19

12 #16

6 #12(B-G)

24A24

12 #12

24-5

16 #16

24-7

14 #16(A-M,O)

2 #12(P,N)

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

High Volume Layouts - readily
available from Cannon Distributors

www.ittcannon.com

173

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Contact Arrangements (Continued)

LEGEND

Resilient only
Resilient & Plastic

Shell Size
No. of Contacts

Service Rating

24-28

24 #16

Inst.

28-7
2 #4

28-22

3 #16(D-F)

3 #4(A-C)

28-10

3 #12(A,F,G)

2 #8(B,E)
2 #4(C,D)

D(G), A(all others)

28-1

6 #12(A,B,D-F,H)

3 #8(C,J,G)

D(A,E,J)

A(all others)

28A16

5 #16(A,D-F,J)

4 #4(B,C,G,H)

28-19

6 #16(A-C,H,L,M)

4 #12(E,G,J,K)

A(C,E,G,J,K,L)

B(H,M),D(A,B)

28-12

26 #16

28-11

18 #16(A-I, N-X)

4 #12(J-M)

28-16

20 #16

28-17

15 #16

A(A-L), B(R)

D(M-P)

28-20

4 #16(K-N)

10 #12(A-J,P)

28-2

12 #16(A,L,N)

2 #12(M,P)

28-9

6 #16(A,H-M)

6 #12(B-G)

28-15

35 #16

For MIL equip

design, use 28-21

28-21

37 #16

28A51

43 #16

32-17

4 #4

32-1

3 #12(A,C,D)

2 #0(B,E)

E(A),D(all others)

32-15

2 #0(A,G)

6 #12(B,C,D,E,F,H)

32-9

12 #16(C-N)

2 #4(A,B)

36-4
3 #0

A(B,C),C(A)

32A10

54 #16

32A47

47 #16

32-7

28 #16(A-N,W-Z,a-k)

7 #12(O-V)

Inst. (A,B,h,j)

A(all others)

32-8

24 #16(A-L,T-Z,a-e)

6 #12(M-S)

2 #8(O,R)

For new MIL equip.

design, use 32-7

32-6

16 #16(A-O,S)

2 #12(U,V)

3 #8(P,R,T)

2 #4(W,X)

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

*NOTE: Additional layouts are the same as shown but in unique alternate positioins. Please consult the factory.

High Volume Layouts - readily
available from Cannon Distributors

M N

H J

u v

www.ittcannon.com

174

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Contact Arrangements (Continued)

LEGEND

Resilient only
Resilient & Plastic

Shell Size
No. of Contacts

Service Rating

36-5
4 #0

36-6

4 #4(B,C,E,F)

2 #0(A,D)

36-14

6 #16(K-N,P,Q)

5 #12(B,D,F,H,J)

5 #8(A,C,E,G,I)

36A16

18 #12

(B,C,V,J,K,M,N,

R, T-Iron; A,D-F,H,L

P,S,U-Constantan)

36A46

27 #12

36-9

14 #16(A-G,Z-f)

14 #12(H-N,S-Y)

2 #8(O,R)

1 #4(P)

36A66

52 #16(A-c,h-AK)

4 #12(d,e,f,g)

36A34

52 #16

36-10

48 #16

36-8

46 #16(A-X,Z-z

1 #12(Y)

36-7

40 #16(A-Z,a-s)

7 #12(t-z)

36-15

35 #16

D(m), A (all others)

40A33

7 #8(G-N)

6 #4(A-F)

40-10

16 #16(A,B,E-H,M,N,P

Q,V-Y,b,c)

9 #8(C,D,I,L,O,R,U,Z,a)

4 #4(K,J,S,T)

40A27

60 #16

40-56

85 #16

48-5

90 #16(A-BL,BN-BT,BW,BX)

1 #8(CD)

9 #12(BM,BU,BV,BY-CC,CE)

44-1

36 #16(A-S,Z-t

6 #12(T-Y)

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

Shell Size
No. of Contacts

Service Rating

High Volume Layouts - readily
available from Cannon Distributors

Grommet not available. Consult
factory for ordering connectors
with this arrangment.

Q R

AG AH

AP AQ

AR AS

BC BD BE

BP BQ

AA AB

AC AD AE AF AG AJ AK AL AM AN

AP AR AS

AT AU AV AW AX AY

BA BB BC BD BE BF BG

BJ BK BL

BP BR

BU BV

AK AJ

www.ittcannon.com

175

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Cable Connecting Plug (Receptacle with no mounting flange)

MS3101E/MS3101F
Integral Cable Clamp

CA3101E/CA3101E

MS3101E cable connecting
plugs are used for cable
extension requirements, where
mounting provisions are
unnecessary.

MS3101E plugs mate with
3106, 3107 and 3108 plugs.
Note: the D revision of
MIL-C-5015 has changed the
nomenclature of the 3101 from
receptacle to plug.

MS3101R cable connecting plug
is identical in purpose to the
MS3101E. The MS3101R
features a shorter lightweight
endbell and mates with 3106,
3107 and 3108 plugs. Note:
The D revision of the
MIL-C-5015 specification has
changed the nomenclature of
the 3101 from receptacle to
plug.

MS3101R

Shell

Size

Shell

Size

Not to MS specification
*Not Available in MS3101E and MS3101R.

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

1/2-28UNEF-2A

5/8-24UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

1-1/8-18UNEF-2A

1-1/4-18UNEF-2A

1-3/8-18UNEF-2A

1-1/2-18UNEF-2A

1-3/4-18UNS-2A

2-18UNS-2A

2-1/4-16UN-2A

2-1/2-16UN-2A

Shell

Size

Thread

10S

10SL

12S

14S

16S

.375 (9.53)

.625(15.88)

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.281 (32.54)

1.062 (26.97)

1.156 (29.36)

1.281 (32.54)

1.344 (34.14)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

2.250 (57.15)

2.625 (66.68)

2.625 (66.58)

2.688 (68.28)

2.750 (69.85)

2.969 (75.44)

3.031 (76.99)

3.281 (83.34)

3.560 (89.66)

1.838 (46.69)

2.181 (55.40)

2.281 (55.40)

2.322 (58.98)

2.427 (61.65)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

.515 (13.08)

.640 (16.26)

.765 (19.43)

.890 (22.61)

1.015 (25.78)

.765 (19.43)

.890 (22.61)

1.015 (25.78)

1.140 (28.96)

1.265 (32.13)

1.390 (35.31)

1.515 (38.48)

1.765 (44.83)

2.015 (51.18)

2.270 (57.66)

2.427 (61.65)

.840 (21.34)

.900 (22.86)

1.00 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

Min.

Max.

Min.

Max.

+.031(0.79)

-.000(0.00)

CA3101R

A Thd.

www.ittcannon.com

176

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Wall Mounting Receptacle

MS3100E/MS3100F
Integral Cable Clamp

CA3100E/CA3100E

MS3100F wall mounting
receptacles are used to carry
wires thru walls or bulkheads,
or to provide a means of
disconnection at a bulkhead.
MS3100F receptacles mate
with 3106 and 3108 plugs.

MS3100E is identical to
MS3100F and is available upon
request. For new equipment,
customer should specify
MS3100F.

The MS3100R receptacle is
identical in purpose to the
MS3100F. The MS3100R
features a shorter light weight
endbell and mates with 3106
and3108 plugs.

MS3100R

Shell

Size

Shell

Size

Not to MS specification
*Not Available in MS3101E and MS3101R.

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

1/2-28UNEF-2A

5/8-24UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

1-1/8-18UNEF-2A

1-1/4-18UNEF-2A

1-3/8-18UNEF-2A

1-1/2-18UNEF-2A

1-3/4-18UNS-2A

2-18UNS-2A

2-1/4-16UN-2A

2-1/2-16UN-2A

Shell

Size

Thread

10S

10SL

12S

14S

16S

.375 (9.53)

.625(15.88)

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

2.250 (57.15)

2.625 (66.68)

2.625 (66.58)

2.688 (68.28)

2.750 (69.85)

2.969 (75.44)

3.031 (76.99)

3.281 (83.34)

3.560 (89.66)

1.838 (46.69)

2.181 (55.40)

2.281 (55.40)

2.322 (58.98)

2.427 (61.65)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.93)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

2.188 (55.58)

.875 (22.23)

1.000 (25.40)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.375 (34.93)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

.120 (3.05)

.147 (3.73)

.173 (4.39)

.840 (21.34)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

Min.

Max.

Min.

Max.

+_.031

+_.005

Max.

+.031

-.000

+.010

-.005

CA3100R

A Thd.

T Dia.

4 Mtg. Holes

T Dia.

4 Mtg. Holes

Typ.

R Typ.

S Typ.

A Thd.

www.ittcannon.com

177

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Straight Plug

MS3106E/MS3106F
Integral Cable Clamp

CA3106E/CA06R

MS3106F straight plugs mate
with 3100 and 3102
receptacles and 3101 plugs.

The MS3106E is available upon
request. For new equipment,
customer should specify.
MS3106F. MS3106E is identical
to MS3106F except to O ring
under the coupling nut.

The MS3106R striaght plug is
identical in puropse to the
MS3106F. The MS3106R has
the shorter endbell. This plug
will mate with 3100 and 3102
receptacles and 3101 plugs.

MS3106R

Shell

Size

Shell

Size

Not to MS specification

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

1/2-28UNEF-2B

5/8-24UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

1-1/8-18UNEF-2B

1-1/4-18UNEF-2B

1-3/8-18UNEF-2B

1-1/2-18UNEF-2B

1-3/4-18UNS-2B

2-18UNS-2B

2-1/4-16UN-2B

2-1/2-16UN-2B

Shell

Size

Thread

** Barrel engaging face to shoulder.

10S

10SL

12S

14S

16S

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

.536 (13.61)

.724 (18.39)

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

2.219 (56.36)

2.469 (62.71)

2.723 (69.16)

2.250 (57.15)

2.625 (66.68)

2.688 (68.28)

2.750 (69.85)

2.969 (75.41)

3.031 (76.99)

3.281 (83.34)

3.560 (89.66)

1.838 (46.69)

2.181 (55.40)

2.281 (55.40)

2.322 (58.98)

2.427 (61.65)

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

.840 (21.34)

.900 (22.86)

1.00 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

Max.

Min.

J**

Max.

CA3106R

A Thd.

J**

www.ittcannon.com

178

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Box Mounting Receptacle

90° Angle Plug

MS3102E/MS3102R

CA3102E/CA3102R

MS3108R 90° angle plugs with
O ring seal less cable clamp)
and the MS3108E 90° angle
plugs (less O ring seal with
cable clamp) are used where
there is limited space and
where wires must be brought at
abrupt angles. This plugs will
mate with 3100 and 3102
receptacles and 3101 plugs.

MS3108E/MS3108R

Shell

Size

Shell

Size

Not to MS specification

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

X DIMENSION

Shell Size

Contact Size

Max. Solder Pot Ext. - Pin or Socket

8S, 10S, 10SL

12S, 14S, 16S

20,22

24,28

32,36

.534

.518

.705

.674

.612

.549

.705

.674

.612

.549

.767

.736

.674

.611

.767

.736

.674

.611

.971

.909

.846

1/2-28UNEF-2B

5/8-24UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1/2-28UNEF-2A

5/8-24UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2B

1-1/8-18UNEF-2B

1-1/4-18UNEF-2B

1-3/8-18UNEF-2B

1-1/2-18UNEF-2B

1-3/4-18UNS-2B

2-18UNS-2B

2-1/4-16UN-2B

2-1/2-16UN-2B

1-20UNEF-2A

1-1/8-18UNEF-2A

1-1/4-18UNEF-2A

1-3/8-18UNEF-2A

1-1/2-18UNEF-2A

1-3/4-18UNS-2A

2-18UNS-2A

2-1/4-16UN-2A

2-1/2-16UN-2A

Shell

Size

Box Mounting

Receptacle

Box Mounting

Receptacle

90° Angle

Plug

90° Angle

Plug

A Thread

** Barrel engaging face to shoulder.

10S

10SL

12S

14S

16S

.536 (13.61)

.724 (18.39)

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

2.219 (56.36)

2.469 (62.71)

2.723 (69.16)

Min.

Max.

J**

Max.

+.031 (0.79)

-.000 (0.00)

+.010

-.005

Max.

+_.005

+_.031

Max.

CA3108E/CA3108R

J**

A Thd.

(Class-2B)

End of

Thread

(MS3108R)

See page 185 for cable clamp dimensions.

Thread for

Attachment

of M85049/41

(MS3057)

Cable Clamp

T Dia.

4 Mtg. Holes

A Thd.

(Class-2A)

Max. Solder

Pot Extension

.375 (9.53)

.625(15.88)

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

1.040 (26.42)

1.400 (35.56)

2.156 (54.76)

2.188 (55.58)

2.312 (58.72)

2.406 (61.11)

2.531 (64.29)

2.688 (68.28)

2.781 (70.64)

2.844 (72.24)

3.250 (82.55)

3.719 (94.46)

4.188 (106.38)

4.297 (109.14)

7.211 (183.16)

.426 (10.82)

.520 (13.21)

.614 (15.60)

.739 (18.77)

.864 (21.95)

.614 (15.60)

.739 (18.77)

.864 (21.95)

.989 (25.12)

1.145 (29.08)

1.270 (32.26)

1.395 (35.43)

1.614 (41.00)

1.864 (47.35)

2.051 (52.10)

2.390 (60.71)

1.281 (30.94)

1.250 (31.75)

1.281 (32.54)

1.406 (35.71)

1.531 (38.89)

1.281 (32.54)

1.406 (35.71)

1.531 (38.89)

1.593 (40.46)

1.656 (42.06)

1.718 (43.64)

1.890 (48.01)

1.968 (49.99)

2.187 (55.55)

2.406 (61.11)

5.875 (149.22)

.811 (20.60)

.842 (21.39)

.873 (22.17)

.936 (23.77)

.998 (25.35)

.873 (22.17)

.936 (23.77)

.998 (25.35)

1.061 (26.95)

1.123 (28.52)

1.186 (30.12)

1.263 (32.08)

1.342 (34.09)

1.561 (39.65)

1.780 (45.21)

1.640 (41.66)

1.703 (43.26)

1.765 (44.83)

1.796 (45.62)

2.062 (52.37)

2.125 (53.98)

2.156 (54.76)

2.250 (57.15)

2.312 (58.72)

2.531 (64.29)

2.750 (69.85)

2.875 (73.02)

5.690 (144.53)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.93)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

2.188 (55.58)

.875 (22.23)

1.000 (25.40)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.375 (34.93)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

.120 (3.05)

.147 (3.73)

.173 (4.39)

MS3102E and MS3102R box mounting receptacles
are used in junction boxes or as an integral part of
equipment. These connectors are identical in con-
struction and will mate with 3106, 3107 and 3108
plugs. For new equipment, customer should specify
MS3102R.

www.ittcannon.com

179

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

How to Order

Wall Mounting Receptacle

MS3103
Nylon Potting Cup
Threaded Attachment Ring

CA3100ER

PREFIX

CA - ITT Cannon prefix indicating special applica-
tion or variation of MS

The CA3100ER receptacle (MS3103) is supplied with a resilient insulator and nylon potting cup with a
threaded attachment ring. This receptacle mates with 3106, 3107, and 3108 plugs.

Polarizing

Boss

T Dia.

4 Mtg. Holes

A Thd.

Coupling thread diameter figured in sixteenths of
an inch

See pages 171-174

P for Pin: S for Socket

3100 - Wall mounting receptacle (MS3103)
3106 - Straight plug (MS25183)
3108 - 90° angle plug

ER - Resilient insulator, nylon potting cup and
thread attachment ring
No class designator for MS types.

SHELL STYLE

MS
MS
CA

25183

3103
3100

-
-

18
18
18

10
10
10

P
P
P

-
-
-

COTNACT ARRANGEMENTS

COTNACT TYPE

SHELL STYLE

CLASS

SHELL SIZE

CONTACT ARRANGEMENT

CONTACT TYPE

Shell

Size

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

Max.

+_.005 (+_0.13)

+.010 (+0.25)

-.005 (+0.13)

Max.

Thread

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.968 (24.59)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.92)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

1.531 (38.89)

1.968 (49.99)

2.188 (55.58)

.906 (23.01)

1.031 (26.19)

1.125 (28.58)

1.219 (30.96)

1.312 (33.32)

1.125 (28.58)

1.219 (30.96)

1.312 (33.32)

1.406 (35.71)

1.531 (38.89)

1.656 (42.06)

1.781 (45.24)

2.031 (51.59)

2.281 (57.94)

2.531 (64.29)

.120 (3.05)

.147 (3.73)

.173 (4.39)

1/2-28UNEF-2A

5/8-24NEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

1-20UNEF-2A

1-1/8-18NEF-2A

1-1/4-18NEF-2A

1-3/8-18NEF-2A

1-1/2-18NEF-2A

1-3/4-18NS-2A

2-18NS-2A

2-1/4-16UN-2A

MS type potting connectors are available with nylon
cups. 00 and 06 shell styles with plastic cups and
resilient insulators meet the requirments of
MS3103 and MS25183. Also available is the 08
plug with resilient insulator and 90° angle nylon
potting cup.
ITT Cannon provides for a 1/4" clearance for
potting on all contact sizes.

www.ittcannon.com

180

Dimensions are shown in inches (millimeters).

Dimensions subject to change.

MIL-C-5015 Connectors MS-E/F/R/ER

Straight Plug

90° Angle Plug

CA3106ER

CA3108ER

MS25183
Nylon Potting Cup
Rubber Gasket

CA3106ER

P Dia.

Polarizing

Groove

A Thd.

Gasket

Lenght of

Engagement

Metal Potting Ring

To end

contact

1/4"

Metal

Potting Ring

Nylon Potting Cup
Rubber Gasket

CA3108ER

Shell

Size

Max.

L Max.

For Arr.

w/#16
& #12

Contacts

For Arr.

w/#8
& #4

Contacts

Performance Specifications - Page 168

Contact, Sealing Plugs, Assembly Tools - Page

187

Contact Arrangements - Page 171-174

10S

10SL

12S

14S

16S

Thread

1/2-28UNEF-2B

5/8-24UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

1-1/8-18UNEF-2B

1-1/4-18UNEF-2B

1-3/8-18UNEF-2B

1-1/2-18UNEF-2B

1-3/4-18UNS-2B

2-18UNS-2B

2-1/4-16UN-2B

2-1/2-16UN-2B

Thread

5/8-24UNEF-2B

3/4-24UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

1-1/8-18UNEF-2B

1-1/4-18UNEF-2B

1-3/8-18UNEF-2B

1-1/2-18UNEF-2B

1-3/4-18UNS-2B

2-18UNS-2B

2-1/4-16UN-2B

.563 (13.61)

.724 (18.39)

1.040 (26.42)

1.290 (32.77)

1.040 (26.42)

1.290 (32.77)

1.540 (39.12)

1.790 (45.47)

2.040 (51.82)

2.290 (58.17)

2.540 (64.52)

1.463 (37.16)

1.600 (40.64)

1.910 (48.51)

2.100 (53.34)

2.281 (57.94)

2.485 (63.12)

2.300 (58.42)

2.550 (64.77)

2.610 (66.29)

2.850 (72.39)

2.985 (75.82)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (.37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

1.219 (30.96)

2.469 (62.71)

.536 (13.61)

.724 (18.39)

1.562 (39.67)

2.000 (50.80)

2.125 (53.98)

2.180 (55.37)

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

1.219 (30.96)

2.469 (62.71)

2.723 (69.16)

The CA3106ER plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings,
and a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101
plugs.

The CA3108ER is supplied with resilent insulator, 90° nylon potting cup and threaded attachment ring with
a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101 plugs.

Ð­Ð»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: CA3106R20-27PW

ÐÐ»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: CA3106R20-27PW