Version 05.01.03
G-03
Fiber Optic
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Fiber Optic
FPA
T
he Fiber Optic PatchCord Assemblies
(FPA) series are available in single-
mode and multi-mode, in simplex and
duplex. They are manufactured and tested to
industry standards. They are in accordance to
Telcordia, TIA/EIA, and IEC specifications.
FPA cable assemblies are available in
Premium and Standard performance levels.
The Premium performance grade cable
offering is for applications requiring high-
performance. The Standard performance
grade cable offering is for applications where
cost is of most concern.
Applications:
Fast Ethernet, Data Communications LAN
and WAN
High-Speed Enterprise Servers
Multiplexors, Switches, and Routers
Optical Access and ATM Networks
Equipment
Optical Transport and Telecommunications
Switching Equipment
FPA are available in 3 mm dia. cable
with industry standard connectors in the
LC, SC, ST, and FC single channel
connector types. VF-45 and MT-RJ are also
available. LC/LC assemblies are with 900 m
buffered fiber (Un-ruggedized), 1.6 dia. and
3 mm dia. jacket optional (Ruggedized).
Premium performance grade cables offer
low-loss superior performance at
competitive prices for optimum value to
customers:
Ultra PC polish (3U grade-Ultra Physical
Contact polish)
Angled PC polish (3A grade-Angle
Physical Contact polish)
Standard performance grade cables for cost
conscious applications:
PC polish (5P grade-Physical Contact
polish)
Single-mode (Yellow Jacketed-8.3/125 m)
cables are manufactured in PC, UPC, and
APC polish versions.
Multi-mode (Orange Jacketed-62.5/125 m
ZipCord) is standard for FPA cable assemblies.
Multi-mode 50/125 m fiber is optional.
UL-listed OFNR Riser rated jacket. Optional
UL-listed OFNP Plenum rated cable jacket for
routing under computer room floors and in
air circulating ducts.
Standard FPA offering in 1 m, 2 m, 3 m,
5 m and 10 m lengths. Optional non-
standard cable lengths and a variety of
other connector types. Patch cord
assemblies with various connector type
pairings are also available.
Meets TIA/EIA 568 specifications.
Compliance with Telcordia GR-326-CORE
also available.
All assemblies are 100% tested for optical
attenuation performance.
Cost effective custom cable assemblies in
special lengths and/or connectors built to
customer specific configuration.
Performance Specifications
Single-mode
PC (5P)
Insertion Loss: 0.5 dB, Return Loss: 35 dB
UPC (3U)
Insertion Loss: 0.3 dB, Return Loss: 55 dB
APC (3A)
Insertion Loss: 0.3 dB, Return Loss: 65 dB
Multi-mode
PC (5P)
Insertion Loss: 0.5 dB
Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs
Product Features
For more information: www.ittcannon.com/cat297
PDF 
ZIP