Version 05.01.03
Filter; ARINC Series 600 Standard, Rack & Panel
TBKA
T
BKA connectors represent a major
milestone in presenting a rack and
panel connector for support of the air
transportation market.
Several important design concerns have been
addressed and solved in this series. High
mating forces of pluggable modules in a rack
have been reduced by approximately two-
thirds. Filter adaptations include either single
module (gang) or complete connector filtering.
The standard version features non-removable
contacts with PC tail termination. Other
versions include crimp piggyback rear release
contacts and/or removable front sockets.
In the ARINC Series 600 Standard connector
series, size 22 contacts are the only size that
utilize the POS-A-LINE connector construction
feature. The hooded socket extends from its
receptacle insulator in the POS-A-LINE design.
Applications:
TCAS Commercial Avionics
Wind Shear
Low insertion force contacts.
Non-environmental versions.
Polarizing posts that are removable from the
mating face.
Field replaceable filter modules with size 22
contacts.
Crimp piggyback and Pi contacts for filter
module.
Uses standard DPX crimp,
insertion/extraction tooling.
Waveguide connections available.
H-05
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Filter
Performance Specifications: See next page for additional data
Contact Termination
PC Board Tails; Crimp Sockets (Piggyback)
Number of Circuits
Up to 800 (size 22)
Operating Temperature
55C to 125C (67F to 257F)
Polarization
Polarizing Posts or Keys
Materials and Finishes
Description
Material
Finish
Shell
Aluminum Alloy per QQ-A-591/A380
Electroless Nickel
Insulator
High Grade Plastic/Epoxy
--
Contact
Copper Alloy per QQ-C-533
Gold over Nickel
Ground Spring
Copper Alloy
Gold
Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs
Product Features
For more information: www.ittcannon.com/cat020
Version 05.01.03
Filter; ARINC Series 600 Standard, Rack & Panel
TBKA
TBKA Electrical Data
Contact Size
22, 20, 16
Current Rating
5 A (Size #22); 7.5 A (Size #20); 15 A (Size #16)
Filter Type
Pi ()
Insulation Resistance,
electrification time 2 minutes,
25C (77F), 100 V dc
5,000 M min.
Operating Voltage
200 V dc or 120 V ac rms, 400 Hz
Available Filter Frequency
Low
Middle
Standard
High
Capacitance at 1 KHz,
32000 pF
8000 pF
3300 pF
850 pF
0.1 V ac rms, 25C (77F)
45000 pF
12000 pF
5000 pF
1300 pF
DWV (sea level)
300 V dc (Size #22)
500 A max. charge/discharge
500 V dc ( Sizes #20, #16)
500 V dc
500 V dc
500 V dc
Filter Designation
L
M
T
H
Filter Performance
Frequency
Attenuation
Attenuation
Attenuation
Attenuation
MHz
dB min.
dB min.
dB min.
dB min.
0.1
2
--
--
--
1
10
2
--
--
2
16
7
2
--
10
35
18
8
2
100
60
55
45
30
500-1000
65
60
55
45
Attenuation per MIL-STD-220 at 25C (77F) with no applied voltage or current.
Contact Cannon for higher or mixed attenuation values and higher voltage ratings.
TBKA Filter Performance
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
H-06
Filter
PDF 
ZIP