SPEC NO: DSAD0918
REV NO: V.2 DATE: MAR/10/2005 PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000055
Package Dimensions
1.6X0.8mm SMD CHIP LED LAMP
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is
0
.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
AP1608SEC SUPER BRIGHT ORANGE
Description
The Super Bright Orange device is made with DH
InGaAlP (on GaAs substrate) light emitting diode chip.
Features
1.6mmX0.8mm SMT LED, 1.1mm THICKNESS.
LOW POWER CONSUMPTION.
W I DE VIEW ING A NGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE: 2000PCS / REEL .
RoHS COMPLIANT.
SPEC NO: DSAD0918
REV NO: V.2 DATE: MAR/10/2005 PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000055
Selection Guide
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T
A
=25C
Absolute Maximum Ratings at T
A
=25C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No.
Dice
Lens Type
Iv (mcd)
@ 20mA
Viewing
Angle
Min.
Typ.
2
1/2
AP1608SEC
SUPER BRIGHT ORANGE (InGaAlP)
WATER CLEAR
70
200
120
Symbol
Parameter
Device
Typ.
Max.
Test Conditions
Units
peak
Peak Wavelength
Super Bright Orange
610
nm
I
F
=20mA
D
Dominant Wavelength
Super Bright Orange
601
nm
I
F
=20mA
1/2
Spectral Line Half-width
Super Bright Orange
29
nm
I
F
=20mA
C
Capacitance
Super Bright Orange
30
pF
V
F
=0V;f=1MHz
V
F
Forward Voltage
Super Bright Orange
2.0
2.5
V
I
F
=20mA
I
R
Reverse Current
Super Bright Orange
10
uA
V
R
= 5V
Parameter
Super Bright Orange
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
195
mA
Reverse Voltage
5
V
Operating/Storage Temperature
-40C To +85C
SPEC NO: DSAD0918
REV NO: V.2 DATE: MAR/10/2005 PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000055
Super Bright Orange AP1608SEC
SPEC NO: DSAD0918
REV NO: V.2 DATE: MAR/10/2005 PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000055
Tape Specifications
(Units : mm)
AP1608SEC
Recommended Soldering Pattern
(Units : mm)
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
PDF 
ZIP