www.docs.chipfind.ru
SPEC NO: DSAD1357
REV NO: V.3 DATE: MAR/18/2005 PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000103
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is
0
.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
AP2012F3C
Description
F3 Made with Gallium Arsenide Infrared Emitting
diodes.
2.0x1.25mm INFRA-RED EMITTING DIODE
Features
2.0mmx1.25mm SMT LED,1.1mm THICKNESS.
MECHANICALLY AND SPECTRALLY MATCHED TO THE
PHOTOTRANSISTOR.
WATER CLEAR LENS.
PACKAGE: 2000PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAD1357
REV NO: V.3 DATE: MAR/18/2005 PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000103
Selection Guide
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T
A
=25C
Absolute Maximum Ratings at T
A
=25C
Part No.
Dice
Lens Type
Po (mW/sr)
@ 20mA
Viewing
Angle
Min.
Typ.
2
1/2
AP2012F3C
GaAs
WATER CLEAR
0.4
1.2
120
Item
P/N
Symbol
Typ.
Max.
Units
Test Conditions
Forward Voltage
F3
V
F
1.2
1.6 V
I
F
=20mA
Reverse Current
F3
I
R
-
10
uA
V
R
=5V
Capacitance
F3
C
90
-
pF
V
F
=0V;f=1MHz
Peak Spectral Wavelength
F3
P
940
-
nm
I
F
=20mA
Spectral Bandwidth
F3
1/2
50
-
nm
I
F
=20mA
Parameter
Symbol
F3
Units
Power Dissipation
P
T
100
mW
DC Forward Current
I
F
50
mA
Peak Forward Current[1]
i
FS
1.2
A
Reverse Voltage
V
R
5
V
Operating Temperature
T
A
-40 To +85
C
Storage Temperature
T
STG
-40 To +85
C
Note:
1. 1/100 Duty Cycle, 10s Pulse Width.
SPEC NO: DSAD1357
REV NO: V.3 DATE: MAR/18/2005 PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000103
AP2012F3C
SPEC NO: DSAD1357
REV NO: V.3 DATE: MAR/18/2005 PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203000103
AP2012F3C
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage or radiant intensity), the typical accuracy of the
sorting process is as follows:
1. Radiant Intensity: +/-15%
2. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
PDF 
ZIP