ii
Copyright 20002001 by LSI Logic Corporation. All rights reserved.
Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded cables for SCSI connection external to the cabinet are used in the compliance testing of this Product.
LSI Logic is not responsible for any radio or television interference caused by unauthorized modification of this
equipment or the substitution or attachment of connecting cables and equipment other than those specified by
LSI Logic. The correction of interferences caused by such unauthorized modification, substitution, or attachment will
be the responsibility of the user.
The LSI Logic ITIpci
TM
5132E-S, ITIpci
TM
5132E-SC, ITIpci
TM
5232E, ITIpci
TM
5464E-S, and ITIpci
TM
5464E-I are
tested to comply with FCC standards for home or office use.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du
Canada.
This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the instruction manual.
LSI Logic Corporation
North American Headquarters
Milpitas, CA
408.433.8000
iii
Copyright 20002001 by LSI Logic Corporation. All rights reserved.
This document is preliminary. As such, it contains data derived from functional
simulations and performance estimates. LSI Logic has not verified either the
functional descriptions, or the electrical and mechanical specifications using
production parts.
LSI Logic products are not intended for use in life-support appliances, devices,
or systems. Use of any LSI Logic product in such applications without written
consent of the appropriate LSI Logic officer is prohibited.
Document DB15-000206-00, First Edition (October 2001)
This document describes the LSI Logic Corporation ITIpci 5000 Series Fast
Ethernet Host Adapters and will remain the official reference source for all
revisions/releases of this product until rescinded by an update.
LSI Logic Corporation reserves the right to make changes to any products herein
at any time without notice. LSI Logic does not assume any responsibility or
liability arising out of the application or use of any product described herein,
except as expressly agreed to in writing by LSI Logic; nor does the purchase or
use of a product from LSI Logic convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of
LSI Logic or third parties.
Copyright 20002001 by LSI Logic Corporation. All rights reserved.
TRADEMARK ACKNOWLEDGMENT
The LSI Logic logo design and ITIpci are trademarks or registered trademarks of
LSI Logic Corporation. All other brand and product names may be trademarks of
their respective companies.
MH
To receive product literature, visit us at http://www.lsilogic.com.
For a current list of our distributors, sales offices, and design resource
centers, view our web page located at
http://www.lsilogic.com/contacts/na_salesoffices.html
ITIpci 5000 Series Fast Ethernet PCI Host Adapters
v
Copyright 20002001 by LSI Logic Corporation. All rights reserved.
Preface
This book is the installation and user's guide for the ITIpciTM 5000 Series
Fast Ethernet PCI Host Adapters. This preliminary version contains
information pertaining to the ITI5232E and ITI5464E Four Port Ethernet
Host Adapters.
Audience
This document assumes that you have some familiarity with Ethernet and
Fast Ethernet PCI Host Adapters and related support devices. The
people who benefit from this book are:
Engineers and managers who are evaluating the Host Adapter for
possible use in a system
Engineers who are designing or installing the Host Adapter into a
system
End-users
Organization
This document has the following chapters and appendix:
Chapter 1, Installing the Fast Ethernet Host Adapters
describes
the features of the ITI5232E and ITI5464E host adapters, and
provides instructions for installing these boards.
Chapter 2, Hardware Specifications
provides adapter
specifications, connector information, and cabling requirements.
Chapter 3, Network Device Driver Installation
provides instructions
for installing your device driver onto various operating systems.
Appendix A, Using Digital SRM Console Settings
describes how
the SRM console is used in Digital Alpha platforms.
PDF 
ZIP
