ChipFind - документация

Электронный компонент: MASWSS0069

Скачать:  PDF   ZIP
MASWSS0069_A5
background image
Features
75 Ohms
Positive Voltage Control (0 / +5 V)
Non-reflective
Low Insertion Loss 0.74 dB at 870 MHz
High Isolation 52 dB at 870 MHz
4 mm FQFP-N 20 Lead Package
0.5 micron GaAs pHEMT Process
Description
M/A-COM's MASWSS0069 is a GaAs PHEMT MMIC
single pole double throw (SPDT) switch in a low cost
miniature 4 mm FQFP-N 20 Lead package. The
MASWSS0069 is ideally suited for applications where
low control voltage, low insertion loss, high isolation,
small size and low cost are required. A typical application
is to replace mechanical relays in CATV systems. This
device has an additional state where both arms are off
and the device maintains a terminated and isolated state.
This state is achieved using a third control line. The
MASWSS0069 can be used in all 75 ohm systems oper-
ating up to 1 GHz.

The MASWSS0069 is fabricated using a 0.5 micron gate
length GaAs PHEMT process. The process features full
passivation for performance and reliability.
SPDT High Isolation CATV Switch
5 - 1000 MHz
MASWSS0069
Functional Schematic
MASWSS0069
A5
Ordering Information
Part Number
Package
MASWSS0069
FQFP-N 20 Lead Plastic Package
MASWSS0069TR
7 inch, 1000 piece reel
MASWSS0069SMB
Sample Test Board
Advanced
GND
GND
RF1
V3
GT1
GND
GND
G1
V1
GND RFC GND
V2
G2
GND
GND
GND
RF2
GT2
GND
GND
GND
RF1
V3
GT1
GND
GND
G1
V1
GND RFC GND
V2
G2
GND
GND
GND
RF2
GT2
GND
Parameter
Absolute
Maximum
Max Input Power
(5 - 1000 MHz, 2.5V Control)
+32 dBm
Operating Voltage
+8.5 volts
Operating Temperature
-40
o
C to +85
o
C
Storage Temperature
-65
o
C to +150
o
C
Absolute Maximum Ratings
1,2
1.
Exceeding any one or combination of these limits may
cause permanent damage.
2.
* RFC Port is reflective in `All Off' state.
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
1
background image
SPDT High Isolation CATV Switch, 5 - 1000 MHz
MASWSS0069
A5
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
2
Handling Procedures
Gallium Arsenide Integrated Circuits are ESD
sensitive and can be damaged by static electric-
ity. Proper ESD techniques should be used
when handling these devices.
The following precautions should be observed to
avoid damage:
Static Sensitivity
PIN
No.
PIN Name
Description
1
RF1
RF In/Out
2
GND
Ground
3
GND
Ground
4
GND
Ground
5
G1
RF Ground
6
V1
Control 1
7
GND
Ground
8
RFC
RF In/Out
9
GND
Ground
10
V2
Control 2
11
G2
RF Ground
12
GND
Ground
13
GND
Ground
14
GND
Ground
15
RF2
RF In/Out
16
GND
Ground
17
GT2
RF Ground
18
V3
Control 3
19
GT1
RF Ground
20
GND
Ground
Pin Configuration
1
V1
V2
V3
RFC - RF1
RFC - RF2
+2.5 to +5V
0 + 0.2V
0 + 0.2V
On
Off
0 + 0.2V
+2.5 to +5V
0 + 0.2V
Off
On
0 + 0.2V
0 + 0.2V
+2.5 to +5V
Off
Off
Truth Table
2
2. External 0.01 uF DC blocking capacitors are required on
all RF In/Out and all RF Ground ports.
1. Center paddle should be connected to ground.
background image
SPDT High Isolation CATV Switch, 5 - 1000 MHz
MASWSS0069
A5
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
3
Electrical Specifications: T
A
= 25C, Z
0
= 75
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss
5 - 50 MHz
50 - 1000 MHz
dB
dB
0.45
0.80

Isolation (One Arm On)


Isolation (All Arms Off)
5 - 50 MHz
50 - 1000 MHz
5 - 50 MHz
50 - 1000 MHz
dB
dB
dB
dB


70
51
70
55
Return Loss (On)


Return Loss *(Off)
5 50 MHz
50 1000 MHz
5 50 MHz
50 1000 MHz
dB
dB
dB
dB

33
20
33
22
IP3
Two Tone 10 dBm, 6 MHz Spacing, > 50 MHz
Vc = 0V/5V
dBm
52
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
20
Ton, Toff
50% control to 90% RF, and 50% control to 10% RF
nS
40
Transients
In Band
mV
30
Gate Leakage
|Vc| = 2.5V
uA
14
background image
SPDT High Isolation CATV Switch, 5 - 1000 MHz
MASWSS0069
A5
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s)
or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
North America: Tel. (800) 366-2266
Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
4