North America: 1-800-366-2266
Visit www.macom.com for complete contact and product information.
G2 / SMG2
G2 / SMG2
G2 / SMG2
G2 / SMG2
5 TO 2000 MHz
TO-8 VOLTAGE-CONTROLLED
ATTENUATOR MODULE
AVAILABLE IN SURFACE MOUNT
LOW VSWR: < 1.5:1 (TYP.)
LOW INSERTION LOSS: 2.3 dB TO 1000 MHz (TYP.)
LOW DISTORTION: > 75 dB (TYP.) AT Vcontrol = +15V
Specifications (Rev. Date: 3/02)*
Guaranteed
Characteristic
Typical
0
to 50C
-54
to +85C
Frequency
5-2200 MHz
5-2000 MHz
5-2000 MHz
Maximum Attenuation Available (min.)
5-500 MHz
500-1000 MHz
1000-2000 MHz
34 dB
28 dB
22 dB
31 dB
25 dB
20 dB
30 dB
24 dB
18 dB
Insertion Loss (Vctrl = +15 V) (max.)
5-1000 MHz
1000-2000 MHz
2.3 dB
2.8 dB
3.0 dB
3.5 dB
3.5 dB
4.0 dB
VSWR (Worst case in attenuation range)
5-2000 MHZ
< 1.5:1
2.2:1
2.3:1
Flatness Over Frequency (max.)
(Attenuation = min. to 15 dB, 5-2000 MHz)
0.4 dB
0.8 dB
1.0 dB
Switching Speed (max.)
10% - 90%
0% - 100%
25
sec
70
sec
50
sec
125
sec
60
sec
140
sec
Bias Voltage
+5 V
+5 V
+5 V
Bias Current (max.)
5 mA
6.5 mA
7 mA
Control Voltage
0 to +15 V
0 to +15 V
0 to +15 V
Control Current (max.)
4 mA
6 mA
7 mA
*Measured in a 50-ohm system at +15Vdc unless otherwise specified.
Absolute Maximum Ratings
Outline Drawings
Storage Temperature
-62
C to +125C Package
Figure Model
Maximum Case Temperature
+125
C TO-8
BH
G2
Maximum DC Voltage
+18 Volts Surface Mount
AC
SMG2
Maximum DC Bias Voltage
+10 Volts SMA Connectorized
CG
CG2
Maximum Short Term RF Input Power (1 minute max.)
200 mW
Maximum Peak Power (3
sec max.)
1 W
"S" Series Burn-in Temperature (Case)
+125
C
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever
arising out of the use or application of any product(s) or information.
PDF 
ZIP