SCOPE: DUAL, SPST, HIGH-SPEED CHANNEL ANALOG SWITCH
Device Type Generic Number SMD Number
01
DG405A(x)/883B 5962-89961
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
Outline Letter Mil-Std-1835 Case Outline Package Code
SMD Maxim
E K
GDIP1-T16 or CDIP2-T16 16 LEAD CERDIP J16
2 Z CQCC1-N20 20-Pin Ceramic LCC L20
Absolute Maximum Ratings
Voltage Referenced to V
-
V
+
to V
-
.............................................................................................................................. 44V
V
+
to GND ......................................................................................................................... 25V
V
L
................................................................................................... (GND-0.3V) to (V
+
+0.3V)
Digital Inputs, V
S
, V
D
1/ ......................................................................... (V
-
-2V) to (V
+
+2V)
or 20mA (whichever occurs first.)
Continuous Current, Any terminal .................................................................................. 30mA
Continuous Current, S or D ............................................................................................. 20mA
Current, S or D (Pulsed at 1ms, 10% duty cycle max) .................................................. 100mA
Lead Temperature (soldering, 10 seconds) ........................................................................ +300
C
Storage Temperature ........................................................................................... -65
C to +150
C
Continuous Power Dissipation .............................................................................. T
A
=
+
70
C
16 lead CERDIP(derate 10.0mW/
C above +70
C) ................................................... 800mW
20 lead LCC (derate 9.1 mW/
C above +70
C) ........................................................ 727mW
Junction Temperature T
J
......................................................................................... +150
C
Thermal Resistance, Junction to Case,
JC:
Case Outline 16 lead CERDIP.................................................................... 50
C/W
Case Outline 20 lead LCC ......................................................................... 20
C/W
Thermal Resistance, Junction to Ambient,
JA:
Case Outline 16 lead CERDIP.................................................................. 100
C/W
Case Outline 20 lead LCC ....................................................................... 110
C/W
Recommended Operating Conditions
Ambient Operating Range (T
A
) ............................................................... -55
C to
+
125
C
Positive Supply Voltage (V
+
) ...................................................................................... +15V
Negative Supply Voltage (V
-
) ...................................................................................... -15V
Logic Supply Voltage (V
L
) .......................................................................................... +5V
Charge Injection .......................................................................................................... 60pC
Crosstalk (channel-to-channel) 2/ ............................................................................... 90dB
1/ Signals on S, D or IN exceeding V
+
or V
-
are clamped by internal diodes. Limit forward current to
maximum current ratings.
2/ Crosstalk performance is improved with case outline for 20LCC.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
----------------------------
Electrical Characteristics of DG405/883B for
19-0318
Rev. B
SMD 5962-89961
Page 2 of
6
TABLE 1. ELECTRICAL TESTS
TEST
Symbol
CONDITIONS
-55
C <=T
A
<= +125
C
V
+
=+15V, V
-
=-15V, GND=0V
Unless otherwise specified
Group A
Subgroup
Device
type
Limits
Min
Limits
Max
Units
SWITCH
Drain-Source ON
Resistance
r
DS(ON)
V
+
=+13.5V, V
-
=-13.5V,
I
S
=-10mA, V
D
=
10V
1
2,3
All
35
45
Drain-Source
ON
Resistance
r
DS(ON)
V
+
=+16.5V, V
-
=-16.5V,
I
S
=-10mA, V
D
=+5V, 0V, -5V
1
2,3
All
3.0
5.0
Switch-OFF
Leakage Current
I
S(OFF)
V
+
=+16.5V, V
-
=-16.5V,
V
D
=
15.5V, V
S
=
15.5V
1
2
All
-0.25
-20
0.25
20
nA
Drain-OFF
Leakage Current
I
D(OFF)
V
+
=+16.5V, V
-
=-16.5V,
V
D
=
15.5V, V
S
=
15.5V
1
2
All
-0.25
-20
0.25
20
nA
Channel-ON
Leakage Current
I
D(ON)
+
I
S(ON)
V
+
=+16.5V, V
-
=-16.5V,
V
D
=
15.5V, V
S
=
15.5V
1
2
All
-0.4
-40
0.4
40
nA
INPUT
Input
Current/Voltage
High
I
IH
V
IN
= 2.4V, all others = 0.8V
1,2
All
-1.0
1.0
A
Input
Current/Voltage
Low
I
IL
V
IN
= 0.8V, all others = 2.4V
1,2
All
-1.0
1.0
A
SUPPLY
Positive Supply
Current
I+
V
+
=+16.5V, V
-
=-16.5V,
V
IN
=0V or 5V
1
2,3
All
1.0
5.0
A
Negative Supply
Current
I-
V
+
=+16.5V, V
-
=-16.5V,
V
IN
=0V or 5V
1
2,3
All
-1.0
-5.0
A
Logic Supply
Current
I
L
All channels on or off,
V
+
=+16.5V, V
-
=-16.5V,
V
IN
=0V or 5V
1
2,3
All
1.0
5.0
A
Ground Current
I
GND
All channels on or off,
V
+
=+16.5V, V
-
=-16.5V,
V
IN
=0V or 5V
1
2,3
All
-1.0
-5.0
A
DYNAMIC
Turn-On Time
t
ON
R
L
=300
, CL=35pF
9
10,11
All
150
275
ns
Turn-Off Time
t
OFF
R
L
=300
, CL=35pF
9
10
11
All
100
250
175
ns
ORDERING INFORMATION:
SMD Number
DG405AK/883B 16 CDIP
5962-8996101MEA
DG405AZ/883B 20 LCC
5962-8996101M2C
----------------------------
Electrical Characteristics of DG405/883B for
19-0318
Rev. B
SMD 5962-89763
Page 3 of
6
QUALITY ASSURANCE
Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in Mil-
Std-883.
Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:
1. Test Condition, A, B, C, or D.
2. TA = +125
C minimum.
3. Interim and final electrical test requirements shall be specified in Table 2.
Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B,
C, and D inspection.
Group A inspection:
1. Tests as specified in Table 2.
2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.
Group C and D inspections:
a. End-point electrical parameters shall be specified in Table 1.
b. Steady-state life test, Method 1005 of Mil-Std-883:
1. Test condition A, B, C, D.
2. TA = +125
C, minimum.
3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
TABLE 2. ELECTRICAL TEST REQUIREMENTS
Mil-Std-883 Test Requirements
Subgroups
per Method 5005, Table 1
Interim Electric Parameters
Method 5004
1
Final Electrical Parameters
Method 5005
1*, 2, 3, 9
Group A Test Requirements
Method 5005
1, 2, 3, 9, 10**, 11**
Group C and D End-Point Electrical Parameters
Method 5005
1
* PDA applies to Subgroup 1 only.
** Subgroups 10 and 11 if not tested shall be guaranteed to the limits specified in Table 1.
----------------------------
Electrical Characteristics of DG405/883B for
19-0318
Rev. B
SMD 5962-89961
Page 5 of
6
PDF 
ZIP