preliminary
1 of 1
092799
DS9094SM
Surface-Mount iButton
TM
Clip
www.dalsemi.com
FEATURES
Compact single-piece, all-metal clip for
iButton mounting.
Lowest profile iButton mount
Made from 0.25 mm thick phosphor bronze
Withstands high temperatures required for
surface mounting
Can be soldered, riveted or screw-mounted
Available for F3 and F5 iButton
ORDERING INFORMATION
DS9094SM3 Clip for F3 iButton
DS9094SM5 Clip for F5 iButton
MOUNTING PAD LAYOUT
7.62 Sq. Min.
Data
6.35
29.36
5.72
Ground
DS9094SM3
DS9094SM5
4.81
4.01
Hole centered
2.35
28.09 0.38
17.57
5.08
Hole centered
2.35
28.09 0.38
17.57
5.08
4.81
6.81
All dimensions are in millimeters.
DESCRIPTION
The DS9094SM is a low-cost, surface mount device that retains a 16.3 mm iButton on a printed circuit
board. Two springs that double as ground contacts press the iButton to the data pad on the printed circuit
board. The iButton can be inserted and extracted without special tools. For best results the data contact on
the printed circuit board should be plated with a layer of minimum 0.76 m hard gold over minimum 3.81
m nickel.
PDF 
ZIP