For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
_______________General Description
The MAX3222/MAX3232/MAX3237/MAX3241 trans-
ceivers have a proprietary low-dropout transmitter out-
put stage enabling true RS-232 performance from a
3.0V to 5.5V supply with a dual charge pump. The
devices require only four small 0.1F external charge-
pump capacitors. The MAX3222, MAX3232, and
MAX3241 are guaranteed to run at data rates of
120kbps while maintaining RS-232 output levels. The
MAX3237 is guaranteed to run at data rates of 250kbps
in the normal operating mode and 1Mbps in the
MegaBaudTM operating mode, while maintaining RS-232
output levels.
The MAX3222/MAX3232 have 2 receivers and 2
drivers. The MAX3222 features a 1A shutdown mode
that reduces power consumption and extends battery
life in portable systems. Its receivers remain active in
shutdown mode, allowing external devices such as
modems to be monitored using only 1A supply cur-
rent. The MAX3222 and MAX3232 are pin, package,
and functionally compatible with the industry-standard
MAX242 and MAX232, respectively.
The MAX3241 is a complete serial port (3 drivers/
5 receivers) designed for notebook and subnotebook
computers. The MAX3237 (5 drivers/3 receivers) is ideal
for fast modem applications. Both these devices feature
a shutdown mode in which all receivers can remain
active while using only 1A supply current. Receivers R1
(MAX3237/MAX3241) and R2 (MAX3241) have extra out-
puts in addition to their standard outputs. These extra
outputs are always active, allowing external devices
such as a modem to be monitored without forward bias-
ing the protection diodes in circuitry that may have V
CC
completely removed.
The MAX3222, MAX3237, and MAX3241 are available
in space-saving TSSOP and SSOP packages.
________________________Applications
Notebook, Subnotebook, and Palmtop Computers
High-Speed Modems
Battery-Powered Equipment
Hand-Held Equipment
Peripherals
Printers
____________________________Features
o
Low Supply Current:
300A (MAX3222/MAX3232/MAX3241)
500A (MAX3237)
o
Guaranteed Data Rate:
120kbps (MAX3222/MAX3232/MAX3241)
250kbps (MAX3237--Normal Operation)
1Mbps (MAX3237--MegaBaud Operation)
o
1A Low-Power Shutdown with Receivers Active
(MAX3222/MAX3237/MAX3241)
o
Flow-Through Pinout (MAX3237)
o
Meets EIA/TIA-232 Specifications Down to 3.0V
o
Guaranteed Mouse Driveability (MAX3241)
o
Pin Compatible with Industry-Standard MAX232
(MAX3232)
Pin Compatible with Industry-Standard MAX242
(MAX3222)
o
Guaranteed Slew Rate:
6V/s (MAX3222/MAX3232/MAX3237/MAX3241)
24V/s (MAX3237--MegaBaud Operation)
MAX3222/MAX3232/MAX3237/MAX3241*
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
________________________________________________________________
Maxim Integrated Products
1
18
17
16
15
14
13
12
11
1
2
3
4
5
6
7
8
SHDN
V
CC
GND
T1OUT
C1-
V+
C1+
EN
TOP VIEW
R1IN
R1OUT
T1IN
T2IN
T2OUT
V-
C2-
C2+
10
9
R2OUT
R2IN
DIP/SO
MAX3222
_________________Pin Configurations
______________Ordering Information
19-0273; Rev 5; 3/99
PART
TEMP. RANGE
PIN-PACKAGE
MegaBaud is a trademark of Maxim Integrated Products.
*Covered by U.S. Patent numbers 4,636,930; 4,679,134; 4,777,577; 4,797,899; 4,809,152; 4,897,774; 4,999,761; and other patents pending.
Typical Operating Circuits appear at end of data sheet.
Pin Configurations continued at end of data sheet.
Ordering Information continued at end of data sheet.
MAX3222
CUP
0C to +70C
20 TSSOP
MAX3222CAP
0C to +70C
20 SSOP
MAX3222CWN
0C to +70C
18 SO
MAX3222CPN
0C to +70C
18 Plastic DIP
V
CC
= 5.0V
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
2
_______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +3.0V to +5.5V, C1C4 = 0.1F (Note 2), T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25C.)
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Note 1:
V+ and V- can have a maximum magnitude of 7V, but their absolute difference cannot exceed 13V.
V
CC
...........................................................................-0.3V to +6V
V+ (Note 1) ...............................................................-0.3V to +7V
V- (Note 1) ................................................................+0.3V to -7V
V+ + V- (Note 1)...................................................................+13V
Input Voltages
T_IN, SHDN, EN ...................................................-0.3V to +6V
MBAUD...................................................-0.3V to (V
CC
+ 0.3V)
R_IN .................................................................................25V
Output Voltages
T_OUT...........................................................................13.2V
R_OUT ....................................................-0.3V to (V
CC
+ 0.3V)
Short-Circuit Duration
T_OUT ....................................................................Continuous
Continuous Power Dissipation (T
A
= +70C)
16-Pin Plastic DIP (derate 10.53mW/C above +70C)...842mW
16-Pin Narrow SO (derate 8.70mW/C above +70C) ....696mW
16-Pin Wide SO (derate 9.52mW/C above +70C)........762mW
16-Pin TSSOP (derate 6.7mW/C above +70C).............533mW
18-Pin Plastic DIP (derate 11.11mW/C above +70C) ..889mW
18-Pin SO (derate 9.52mW/C above +70C)..............762mW
20-Pin SSOP (derate 8.00mW/C above +70C) .........640mW
20-Pin TSSOP (derate 7.0mW/C above +70C).............559mW
28-Pin SO (derate 12.50mW/C above +70C) .....................1W
28-Pin SSOP (derate 9.52mW/C above +70C) .........762mW
28-Pin TSSOP (derate 8.7mW/C above +70C).............696mW
Operating Temperature Ranges
MAX32_ _C_ _.....................................................0C to +70C
MAX32_ _E_ _ .................................................-40C to +85C
Storage Temperature Range .............................-65C to +150C
Lead Temperature (soldering, 10sec) .............................+300C
I
OUT
= -1.0mA
I
OUT
= 1.6mA
Receivers disabled
T_IN, EN, SHDN, MBAUD
T_IN, EN, SHDN, MBAUD
CONDITIONS
V
0.8
1.5
Input Threshold Low
0.6
1.2
V
-25
25
Input Voltage Range
0.5
2.0
V
CC
Power-Supply Current
V
V
CC
- 0.6
V
CC
- 0.1
Output Voltage High
V
0.4
Output Voltage Low
A
0.05
10
Output Leakage Current
A
0.01
1.0
Input Leakage Current
V
0.8
Input Logic Threshold Low
(Note 3)
UNITS
MIN
TYP
MAX
PARAMETER
T
A
= +25C
T
A
= +25C
V
1.8
2.4
Input Threshold High
1.5
2.4
V
CC
= 3.3V
V
CC
= 5.0V
2.0
V
2.4
Input Logic Threshold High
(Note 3)
No load, V
CC
= 3.3V or 5.0V,
T
A
= +25C
mA
0.3
1.0
MAX3222/MAX3232/
MAX3241
MAX3237
SHDN = GND, T
A
= +25C
A
1.0
10
Shutdown Supply Current
V
CC
= 3.3V
V
CC
= 5.0V
V
CC
= 3.3V
V
CC
= 5.0V
DC CHARACTERISTICS
LOGIC INPUTS AND RECEIVER OUTPUTS
RECEIVER INPUTS
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
_______________________________________________________________________________________
3
TIMING CHARACTERISTICS--MAX3222/MAX3232/MAX3241
(V
CC
= +3.0V to +5.5V, C1C4 = 0.1F (Note 2), T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25C.)
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= +3.0V to +5.5V, C1C4 = 0.1F (Note 2), T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25C.)
T1IN = T2IN = GND, T3IN = V
CC
,
T3OUT loaded with 3k
to GND,
T1OUT and T2OUT loaded with 2.5mA each
CONDITIONS
V
5.0
Transmitter Output Voltage
V
0.3
Input Hysteresis
UNITS
MIN
TYP
MAX
PARAMETER
All transmitter outputs loaded with 3k
to ground
V
5.0
5.4
Output Voltage Swing
mA
35
60
Output Short-Circuit Current
V
CC
= V+ = V- = 0V, T
OUT
= 2V
300
10M
Output Resistance
V
OUT
= 12V, V
CC
= 0V or 3V to 5.5V, transmitters
disabled
A
25
Output Leakage Current
t
PHL
R
L
= 3k
, C
L
= 1000pF, one transmitter switching
t
PLH
|
t
PHL
- t
PLH
|
|
t
PHL
- t
PLH
|
Normal operation
Normal operation
CONDITIONS
0.3
s
0.3
Receiver Propagation Delay
kbps
120
235
Maximum Data Rate
ns
300
Receiver Skew
ns
300
Transmitter Skew
ns
200
Receiver Output Disable Time
ns
200
Receiver Output Enable Time
UNITS
MIN
TYP
MAX
PARAMETER
6
30
V
CC
= 3.3V, R
L
= 3
to 7k
,
+3V to -3V or -3V to +3V,
T
A
= +25C
V/s
4
30
Transition-Region Slew Rate
R_IN to R_OUT, C
L
= 150pF
C
L
= 150pF to
1000pF
C
L
= 150pF to
2500pF
T
A
= +25C
k
3
5
7
Input Resistance
MOUSE DRIVEABILITY (MAX3241)
TRANSMITTER OUTPUTS
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
4
_______________________________________________________________________________________
__________________________________________Typical Operating Characteristics
(V
CC
= +3.3V, 235kbps data rate, 0.1F capacitors, all transmitters loaded with 3k
, T
A
= +25C, unless otherwise noted.)
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
0
MAX3222/MAX3232
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE
MAX3222-01
LOAD CAPACITANCE (pF)
TRANSMITTER OUTPUT VOLTAGE (V)
2000
3000
1000
4000
5000
V
OUT
+
V
OUT
-
0
2
4
6
8
10
12
14
16
18
20
22
150
MAX3222/MAX3232
SLEW RATE
vs. LOAD CAPACITANCE
MAX3222-02
LOAD CAPACITANCE (pF)
SLEW RATE (V/
s)
2000
3000
1000
4000
5000
FOR DATA RATES UP TO 235kbps
+SLEW
-SLEW
0
5
10
15
20
25
30
35
40
0
MAX3222/MAX3232
SUPPLY CURRENT vs. LOAD CAPACITANCE
WHEN TRANSMITTING DATA
MAX3222-03
LOAD CAPACITANCE (pF)
SUPPLY CURRENT (mA)
2000
3000
1000
4000
5000
235kbps
120kbps
20kbps
R
L
= 3k
, C
L
= 1000pF, one transmitter switching,
MBAUD = GND
Normal operation
CONDITIONS
Normal operation
ns
200
Receiver Output Disable Time
|
t
PHL
- t
PLH
|
, MBAUD = GND
ns
100
0.15
250
s
0.15
Receiver Propagation Delay
ns
200
Receiver Output Enable Time
UNITS
MIN
TYP
MAX
PARAMETER
TIMING CHARACTERISTICS--MAX3237
(V
CC
= +3.0V to +5.5V, C1C4 = 0.1F (Note 2), T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25C.)
V
CC
= 3.0V to 4.5V, R
L
= 3k
, C
L
= 250pF,
one transmitter switching, MBAUD = V
CC
1000
V
CC
= 4.5V to 5.5V, R
L
= 3k
, C
L
= 1000pF,
one transmitter switching, MBAUD = V
CC
kbps
1000
Maximum Data Rate
R_IN to R_OUT, C
L
= 150pF
|
t
PHL
- t
PLH
|
, MBAUD = V
CC
ns
25
Transmitter Skew
|
t
PHL
- t
PLH
|
ns
50
Receiver Skew
6
30
V/s
4
30
t
PHL
t
PLH
C
L
= 150pF to 2500pF,
MBAUD = GND
C
L
= 150pF
to 1000pF
MBAUD =
GND
V
CC
= 3.3V, R
L
= 3
to 7k
,
+3V to -3V or -3V to +3V,
T
A
= +25C
Transition-Region Slew Rate
MBAUD =
V
CC
24
150
Note 2:
MAX3222/MAX3232/MAX3241: C1C4 = 0.1F tested at 3.3V 10%; C1 = 0.047F, C2C4 = 0.33F tested at 5.0V 10%.
MAX3237: C1C4 = 0.1F tested at 3.3V 5%; C1C4 = 0.22F tested at 3.3V 10%; C1 = 0.047F, C2C4 = 0.33F tested
at 5.0V 10%.
Note 3:
Transmitter input hysteresis is typically 250mV.
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
_______________________________________________________________________________________
5
-7.5
-5.0
-2.5
0
2.5
5.0
7.5
0
MAX3241
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE
MAX3222-04
LOAD CAPACITANCE (pF)
TRANSMITTER OUTPUT VOLTAGE (V)
2000
3000
1000
4000
5000
V
OUT
+
1 TRANSMITTER AT 235kbps
2 TRANSMITTERS AT 30kbps
V
OUT
-
ALL OUTPUTS LOADED WITH 3k
+C
L
0.1
F CHARGE-PUMP CAPACITORS
FOR ALL DATA RATES UP TO 235kbps
4
6
8
10
12
14
16
18
20
22
24
0
MAX3241
SLEW RATE
vs. LOAD CAPACITANCE
MAX3222-05
LOAD CAPACITANCE (pF)
SLEW RATE (V/
s)
2000
3000
1000
4000
5000
+SLEW
-SLEW
0
5
10
15
20
25
30
35
45
40
0
MAX3241
SUPPLY CURRENT vs. LOAD
CAPACITANCE WHEN TRANSMITTING DATA
MAX3222-06
LOAD CAPACITANCE (pF)
SUPPLY CURRENT (mA)
2000
3000
1000
4000
5000
235kbps
120kbps
20kbps
-7.5
-5.0
-2.5
0
2.5
5.0
7.5
0
MAX3237
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE (MBAUD = GND)
MAX3222-07
LOAD CAPACITANCE (pF)
TRANSMITTER OUTPUT VOLTAGE (V)
2000
3000
1000
4000
5000
1 TRANSMITTER AT 240kbps
4 TRANSMITTERS AT 15kbps
3k
+ C
L
LOADS
V
CC
= 3.3V
0
10
20
30
50
40
60
70
0
MAX3237
SLEW RATE vs. LOAD CAPACITANCE
(MBAUD = V
CC
)
MAX3222-10
LOAD CAPACITANCE (pF)
SLEW RATE (V/
s)
500
1000
1500
2000
-SLEW, 1Mbps
+SLEW, 1Mbps
1 TRANSMITTER AT FULL DATA RATE
4 TRANSMITTERS AT 1/16 DATA RATE
3k
+ C
L
LOAD EACH OUTPUT
V
CC
= 3.3V
-SLEW, 2Mbps
+SLEW, 2Mbps
-7.5
-5.0
-2.5
0
2.5
5.0
7.5
0
MAX3237
TRANSMITTER OUTPUT VOLTAGE
vs. LOAD CAPACITANCE (MBAUD = V
CC
)
MAX3222-08
LOAD CAPACITANCE (pF)
TRANSMITTER OUTPUT VOLTAGE (V)
500
1000
1500
2000
1 TRANSMITTER AT FULL DATA RATE
4 TRANSMITTERS AT 1/16 DATA RATE
3k
+ C
L
LOAD, EACH OUTPUT
V
CC
= 3.3V
2Mbps
1.5Mbps
1Mbps
2Mbps
1Mbps
1.5Mbps
0
10
20
30
40
50
60
0
MAX3237
SUPPLY CURRENT vs.
LOAD CAPACITANCE (MBAUD = GND)
MAX3222-11
LOAD CAPACITANCE (pF)
SUPPLY CURRENT (mA)
2000
3000
1000
4000
5000
240kbps
120kbps
20kbps
1 TRANSMITTER AT FULL DATA RATE
4 TRANSMITTERS AT 1/16 DATA RATE
3k
+ C
L
LOADS
V
CC
= 3.3V
0
2
4
6
8
10
12
0
MAX3237
SLEW RATE vs. LOAD CAPACITANCE
(MBAUD = GND)
MAX3222-09
LOAD CAPACITANCE (pF)
SLEW RATE (V/
s)
2000
3000
1000
4000
5000
+SLEW
-SLEW
1 TRANSMITTER AT 240kbps
4 TRANSMITTERS AT 15kbps
3k
+ C
L
LOADS
V
CC
= 3.3V
0
10
30
20
40
50
60
70
0
MAX3237
SKEW vs. LOAD CAPACITANCE
(t
PLH
- t
PHL
)
MAX3222-12
LOAD CAPACITANCE (pF)
1000
1500
500
2000
2500
MAX
MIN
AVERAGE; 10 PARTS
SKEW (ns)
1 TRANSMITTER AT 512kbps
4 TRANSMITTERS AT 32kbps
3k
+ C
L
LOADS
V
CC
= 3.3V
MBAUD = V
CC
_____________________________Typical Operating Characteristics (continued)
(V
CC
= +3.3V, 235kbps data rate, 0.1F capacitors, all transmitters loaded with 3k
, T
A
= +25C, unless otherwise noted.)
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
6
_______________________________________________________________________________________
--
FUNCTION
--
MAX3222
Noninverting Complementary Receiver Outputs.
Always active.
DIP/SO
SSOP
--
11, 14
1
1
Receiver Enable. Active low.
2
2
Positive Terminal of Voltage-Doubler Charge-Pump
Capacitor
6
6
Negative Terminal of Inverting Charge-Pump
Capacitor
5
5
Positive Terminal of Inverting Charge-Pump
Capacitor
4
4
Negative Terminal of Voltage-Doubler Charge-Pump
Capacitor
3
3
+5.5V Generated by the Charge Pump
11, 12
12, 13
TTL/CMOS Transmitter Inputs
10, 13
10, 15
TTL/CMOS Receiver Outputs
9, 14
9, 16
RS-232 Receiver Inputs
8, 15
8, 17
RS-232 Transmitter Outputs
7
7
-5.5V Generated by the Charge Pump
18
20
Shutdown Control. Active low.
17
19
+3.0V to +5.5V Supply Voltage
16
18
Ground
No Connection
MAX3237
MAX3232
--
16
--
13
1
28
5
3
4
1
3
25
2
27
10, 11
17, 19, 22,
23, 24
9, 12
18, 20, 21
8, 13
8, 9, 11
7, 14
5, 6, 7,
10, 12
6
4
--
14
16
26
15
2
--
--
NAME
EN
C1+
C2-
C2+
C1-
V+
T_IN
R_OUT
R_IN
T_OUT
V-
SHDN
V
CC
GND
R_OUTB
N.C.
MAX3241
20, 21
23
28
2
1
24
27
12, 13, 14
1519
48
9, 10, 11
3
22
26
25
--
PIN
--
--
MegaBaud Control Input. Connect to GND for normal
operation; connect to V
CC
for 1Mbps transmission rates.
--
15
MBAUD
--
______________________________________________________________Pin Description
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
_______________________________________________________________________________________
7
_______________Detailed Description
Dual Charge-Pump Voltage Converter
The MAX3222/MAX3232/MAX3237/MAX3241's internal
power supply consists of a regulated dual charge pump
that provides output voltages of +5.5V (doubling charge
pump) and -5.5V (inverting charge pump), regardless of
the input voltage (V
CC
) over the 3.0V to 5.5V range. The
charge pumps operate in a discontinuous mode; if the
output voltages are less than 5.5V, the charge pumps
are enabled, and if the output voltages exceed 5.5V, the
charge pumps are disabled. Each charge pump
requires a flying capacitor (C1, C2) and a reservoir
capacitor (C3, C4) to generate the V+ and V- supplies.
RS-232 Transmitters
The transmitters are inverting level translators that con-
vert CMOS-logic levels to 5.0V EIA/TIA-232 levels.
The MAX3222/MAX3232/MAX3241 transmitters guaran-
tee a 120kbps data rate with worst-case loads of 3k
in
parallel with 1000pF, providing compatibility with PC-to-
PC communication software (such as LapLinkTM).
Typically, these three devices can operate at data rates
of 235kbps. Transmitters can be paralleled to drive multi-
ple receivers or mice.
The MAX3222/MAX3237/MAX3241's output stage is
turned off (high impedance) when the device is in shut-
down mode. When the power is off, the MAX3222/
MAX3232/MAX3237/MAX3241 permit the outputs to be
driven up to 12V.
The transmitter inputs do not have pull-up resistors.
Connect unused inputs to GND or V
CC
.
MAX3237 MegaBaud Operation
In normal operating mode (MBAUD = GND), the
MAX3237 transmitters guarantee a 250kbps data rate
with worst-case loads of 3k
in parallel with 1000pF.
This provides compatibility with PC-to-PC communica-
tion software, such as LaplinkTM.
For higher speed serial communications, the MAX3237
features MegaBaud operation. In MegaBaud operating
mode (MBAUD = V
CC
), the MAX3237 transmitters guar-
antee a 1Mbps data rate with worst-case loads of 3k
in
parallel with 250pF for 3.0V < V
CC
< 4.5V. For 5V 10%
operation, the MAX3237 transmitters guarantee a 1Mbps
data rate into worst-case loads of 3k
in parallel with
1000pF.
MAX3222
MAX3232
MAX3237
MAX3241
5k
R_ IN
R_ OUT
EN
*
C2-
C2+
C1-
C1+
V-
V+
V
CC
C4
C3
C1
C2
0.1
F
V
CC
SHDN
*
T_ OUT
T_ IN
GND
V
CC
0V
7k
150pF
MAX3222
MAX3232
MAX3237
MAX3241
5k
R_ IN
R_ OUT
EN
*
C2-
C2+
C1-
C1+
V-
V+
V
CC
C4
C3
C1
C2
0.1
F
V
CC
SHDN
*
T_ OUT
T_ IN
GND
V
CC
0V
3k
2500pF
MINIMUM SLEW-RATE TEST CIRCUIT
MAXIMUM SLEW-RATE TEST CIRCUIT
*
MAX3222/MAX3241 ONLY
Figure 1. Slew-Rate Test Circuits
LapLink is a trademark of Traveling Software.
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
8
_______________________________________________________________________________________
RS-232 Receivers
The receivers convert RS-232 signals to CMOS-logic out-
put levels. The MAX3222/MAX3237/MAX3241 receivers
have inverting three-state outputs. In shutdown, the
receivers can be active or inactive (Table 1).
The complementary outputs on the MAX3237 (R1OUTB)
and the MAX3241 (R1OUTB, R2OUTB) are always active,
regardless of the state of EN or SHDN. This allows for
Ring Indicator applications without forward biasing other
devices connected to the receiver outputs. This is ideal
for systems where V
CC
is set to 0V in shutdown to
accommodate peripherals, such as UARTs (Figure 2).
MAX3222/MAX3237/MAX3241
Shutdown Mode
Supply current falls to less than 1A in shutdown mode
(SHDN = low). When shut down, the device's charge
pumps are turned off, V+ is pulled down to V
CC
, V- is
pulled to ground, and the transmitter outputs are dis-
abled (high impedance). The time required to exit shut-
down is typically 100s, as shown in Figure 3. Connect
SHDN to V
CC
if the shutdown mode is not used. SHDN
has no effect on R_OUT or R_OUTB.
MAX3222/MAX3237/MAX3241
Enable Control
The inverting receiver outputs (R_OUT) are put into a
high-impedance state when EN is high. The complemen-
tary outputs R1OUTB and R2OUTB are always active,
regardless of the state of EN and SHDN (Table 1). EN
has no effect on T_OUT.
__________Applications Information
Capacitor Selection
The capacitor type used for C1C4 is not critical for
proper operation; polarized or nonpolarized capacitors
can be used. The charge pump requires 0.1F capaci-
tors for 3.3V operation. For other supply voltages, refer to
Table 2 for required capacitor values. Do not use values
lower than those listed in Table 2. Increasing the capaci-
tor values (e.g., by a factor of 2) reduces ripple on the
transmitter outputs and slightly reduces power consump-
tion. C2, C3, and C4 can be increased without changing
C1's value. However, do not increase C1 without also
increasing the values of C2, C3, and C4, to maintain the
proper ratios (C1 to the other capacitors).
When using the minimum required capacitor values,
make sure the capacitor value does not degrade exces-
sively with temperature. If in doubt, use capacitors with a
higher nominal value. The capacitor's equivalent series
resistance (ESR), which usually rises at low tempera-
tures, influences the amount of ripple on V+ and V-.
MAX3237
MAX3241
T1OUT
R1OUTB
Tx
5k
UART
V
CC
T1IN
LOGIC
TRANSITION
DETECTOR
R1IN
R1OUT
EN = V
CC
SHDN = GND
V
CC
TO
P
Rx
PREVIOUS
RS-232
Tx
UART
PROTECTION
DIODE
PROTECTION
DIODE
SHDN = GND
V
CC
V
CC
GND
Rx
5k
a
)
OLDER RS-232: POWERED-DOWN UART DRAWS CURRENT FROM
ACTIVE RECEIVER OUTPUT IN SHUTDOWN.
b
)
NEW MAX3237/MAX3241: EN SHUTS DOWN RECEIVER OUTPUTS (EXCEPT FOR
B OUTPUTS), SO NO CURRENT FLOWS TO UART IN SHUTDOWN. B OUTPUTS
INDICATE RECEIVER ACTIVITY DURING SHUTDOWN WITH EN HIGH.
GND
Figure 2. Detection of RS-232 Activity when the UART and
Interface are Shut Down; Comparison of MAX3237/MAX3241
(b) with Previous Transceivers (a).
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
_______________________________________________________________________________________
9
Power-Supply Decoupling
In most circumstances, a 0.1F bypass capacitor is
adequate. In applications that are sensitive to power-
supply noise, decouple V
CC
to ground with a capacitor
of the same value as charge-pump capacitor C1. Connect
bypass capacitors as close to the IC as possible.
Operation Down to 2.7V
Transmitter outputs will meet EIA/TIA-562 levels of
3.7V with supply voltages as low as 2.7V.
Transmitter Outputs when
Exiting Shutdown
Figure 3 shows two transmitter outputs when exiting
shutdown mode. As they become active, the two trans-
mitter outputs are shown going to opposite RS-232 lev-
els (one transmitter input is high, the other is low).
Each transmitter is loaded with 3k
in parallel with
2500pF. The transmitter outputs display no ringing or
undesirable transients as they come out of shutdown.
Note that the transmitters are enabled only when the
magnitude of V- exceeds approximately 3V.
Mouse Driveability
The MAX3241 has been specifically designed to power
serial mice while operating from low-voltage power sup-
plies. It has been tested with leading mouse brands from
manufacturers such as Microsoft and Logitech. The
MAX3241 successfully drove all serial mice tested and
met their respective current and voltage requirements.
Figure 4a shows the transmitter output voltages under
increasing load current at 3.0V. Figure 4b shows a typical
mouse connection using the MAX3241.
Table 1. MAX3222/MAX3237/MAX3241
Shutdown and Enable Control Truth Table
Table 2. Required Minimum Capacitor Values
5V/div
V
CC
= 3.3V
C1C4 = 0.1
F
2V/div
T2
50
s/div
T1
Figure 3. Transmitter Outputs when Exiting Shutdown or
Powering Up
V
CC
(V)
C1
(F)
4.5 to 5.5
0.047
3.0 to 5.5
0.1
C2, C3, C4
(F)
MAX3222/MAX3232/MAX3241
0.33
0.47
1
Active
0
1
Active
1
S
SH
HD
DN
N
High-Z
1
0
High-Z
0
0
T_OUT
E
EN
N
High-Z
Active
High-Z
Active
R_OUT
R_OUTB
(MAX3237/
MAX3241)
Active
Active
Active
Active
3.0 to 3.6
0.22
3.15 to 3.6
0.1
MAX3237
0.22
0.1
4.5 to 5.5
0.047
3.0 to 5.5
0.22
0.33
1.0
3.0 to 3.6
0.1
0.1
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
10
______________________________________________________________________________________
MAX3241
EN
23
R5OUT
15
R4OUT
16
R3OUT
17
R2OUT
18
R1OUT
19
R2OUTB
20
R1OUTB
21
5k
5k
5k
5k
5k
R5IN
8
R4IN
7
6
R2IN
5
R1IN
4
SHDN
22
GND
25
T3IN
12
T2IN
13
T1IN
14
C2-
2
C2+
1
C1-
24
C1+
28
T3OUT
11
+V
COMPUTER SERIAL PORT
MOUSE
+V
-V
GND
Tx
T2OUT
10
T1OUT
9
V-
3
V+
27
V
CC
V
CC
C4
C3
C
1
C
2
0.1
F
V
CC
= 3V
to 5.5V
26
R3IN
Figure 4b. Mouse Driver Test Circuit
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
MAX3222-04
LOAD CURRENT PER TRANSMITTER (mA)
TRANSMITTER OUTPUT VOLTAGE (V)
V
OUT
+
V
CC
= 3.0V
V
OUT
-
V
OUT
+
V
CC
V
OUT
-
T1
T2
T3
Figure 4a. MAX3241 Transmitter Output Voltage vs. Load Current per Transmitter
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
______________________________________________________________________________________
11
High Data Rates
The MAX3222/MAX3232/MAX3241 maintain the RS-232
5.0V minimum transmitter output voltage even at high
data rates. Figure 5 shows a transmitter loopback test
circuit. Figure 6 shows a loopback test result at
120kbps, and Figure 7 shows the same test at 235kbps.
For Figure 6, all transmitters were driven simultaneously
at 120kbps into RS-232 loads in parallel with 1000pF.
For Figure 7, a single transmitter was driven at 235kbps,
and all transmitters were loaded with an RS-232 receiver
in parallel with 1000pF.
The MAX3237 maintains the RS-232 5.0V minimum
transmitter output voltage at data rates up to 1Mbps.
Figure 8 shows a loopback test result at 1Mbps with
MBAUD = V
CC
. For Figure 8, all transmitters were
loaded with an RS-232 receiver in parallel with 250pF.
MAX3222
MAX3232
MAX3237
MAX3241
5k
R_ IN
R_ OUT
EN
*
C2-
C2+
C1-
C1+
V-
V+
V
CC
C4
C3
C1
C2
0.1
F
V
CC
SHDN
*
T_ OUT
T_ IN
GND
V
CC
0V
1000pF
*
MAX3222/MAX3241 ONLY
T1IN
R1OUT
V
CC
= 3.3V
T1OUT
5V/div
5V/div
5V/div
5
s/div
Figure 5. Loopback Test Circuit
Figure 6. MAX3241 Loopback Test Result at 120kbps
T1IN
R1OUT
V
CC
= 3.3V
T1OUT
5V/div
5V/div
2
s/div
5V/div
Figure 7. MAX3241 Loopback Test Result at 235kbps
+5V
0V
+5V
0V
-5V
+5V
0V
T_IN
T_OUT = R_IN
5k + 250pF
R_OUT
150pF
200ns/div
V
CC
= 3.3V
Figure 8. MAX3237 Loopback Test Result at 1000kbps
(MBAUD = V
CC
)
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
12
______________________________________________________________________________________
__________________________________________________Typical Operating Circuits
MAX3222
R2OUT
10
1
R1OUT
13
R2IN
9
18
GND
16
RS-232
OUTPUTS
TTL/CMOS
INPUTS
T2IN
11
T1IN
12
C2-
6
C2+
5
C1-
4
C1+
2
R1IN 14
T2OUT 8
T1OUT 15
V-
7
V+
3
V
CC
17
C1
0.1
F
C2
0.1
F
0.1
F
+3.3V
RS-232
INPUTS
TTL/CMOS
OUTPUTS
5k
5k
EN
SHDN
C3
*
0.1
F
C4
0.1
F
PIN NUMBERS REFER TO DIP/SO PACKAGES.
*
C3 CAN BE RETURNED TO EITHER V
CC
OR GROUND.
MAX3232
R2OUT
9
R1OUT
12
R2IN
8
GND
15
RS-232
OUTPUTS
TTL/CMOS
INPUTS
T2IN
10
T1IN
11
C2-
5
C2+
4
C1-
3
C1+
1
R1IN 13
T2OUT 7
T1OUT 14
V-
6
V+
2
V
CC
C4
0.1
F
16
0.1
F
0.1
F
0.1
F
+3.3V
RS-232
INPUTS
TTL/CMOS
OUTPUTS
C3
*
0.1
F
5k
5k
*
C3 CAN BE RETURNED TO EITHER V
CC
OR GROUND.
SEE TABLE 2 FOR CAPACITOR SELECTION
Interconnection with 3V and 5V Logic
The MAX3222/MAX3232/MAX3237/MAX3241 can
directly interface with various 5V logic families, includ-
ing ACT and HCT CMOS. See Table 3 for more informa-
tion on possible combinations of interconnections.
Table 3. Logic-Family Compatibility
with Various Supply Voltages
Compatible with ACT and
HCT CMOS, and with TTL.
Incompatible with AC, HC,
and CD4000 CMOS.
3.3
5
SYSTEM
POWER-
SUPPLY
VOLTAGE
(V)
Compatible with all TTL
and CMOS-logic families.
5
5
Compatible with all CMOS
families.
3.3
3.3
COMPATIBILITY
MAX32_ _
V
CC
SUPPLY
VOLTAGE
(V)
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
______________________________________________________________________________________
13
_____________________________________Typical Operating Circuits (continued)
MAX3241
EN
23
R5OUT
15
R4OUT
16
R3OUT
17
R2OUT
18
R1OUT
19
R2OUTB
20
R1OUTB
21
TTL/CMOS
OUTPUTS
5k
5k
5k
5k
5k
R5IN 8
*
C3 CAN BE RETURNED TO EITHER V
CC
OR GROUND.
R4IN 7
R3IN 6
R2IN
5
R1IN 4
RS-232
INPUTS
SHDN
22
GND
25
RS-232
OUTPUTS
TTL/CMOS
INPUTS
T3IN
12
T2IN
13
T1IN
14
C2-
2
C2+
1
C1-
24
C1+
28
T3OUT 11
T2OUT 10
T1OUT 9
V-
3
V+
27
V
CC
C4
0.1
F
C3
*
0.1
F
0.1
F
0.1
F
0.1
F
+3.3V
26
MAX3237
EN
13
R3OUT
18
R2OUT
20
R1OUT
21
R1OUTB
16
LOGIC
OUTPUTS
5k
5k
5k
*
C3 CAN BE RETURNED TO EITHER V
CC
OR GROUND.
R3IN 11
R2IN
9
R1IN 8
RS-232
INPUTS
GND
2
RS-232
OUTPUTS
LOGIC
INPUTS
T3IN
22
T2IN
23
T1IN
24
C2-
3
C2+
1
C1-
25
C1+
28
T3OUT 7
T2OUT 6
T1OUT 5
T1
T2
T3
R1
R2
R3
V-
4
V+
27
V
CC
0.1
F
0.1
F
0.1
F
0.1
F
0.1
F
26
MBAUD
15
T5IN
17
T4IN
19
T5OUT 12
T4OUT 10
SHDN
14
T4
T5
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
14
______________________________________________________________________________________
_____________________________________________Pin Configurations (continued)
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
V
CC
GND
T1OUT
R1IN
C2+
C1-
V+
C1+
MAX3232
R1OUT
T1IN
T2IN
R2OUT
R2IN
T2OUT
V-
C2-
DIP/SO/TSSOP
TOP VIEW
20
19
18
17
16
15
14
13
1
2
3
8
12
11
10
4
5
6
7
SHDN
V
CC
GND
T1OUT
C1-
V+
C1+
EN
R1IN
R1OUT
T1IN
T2IN
T2OUT
V-
C2-
C2+
9
R2IN
R2OUT
SSOP/TSSOP
N.C.
N.C.
MAX3222
28
27
26
25
24
23
22
21
20
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
C1+
V+
V
CC
C1-
T1IN
T2IN
MBAUD
T3IN
R1OUT
R2OUT
T4IN
R3OUT
T5IN
R1OUTB
SHDN
EN
T5OUT
R3IN
T4OUT
R2IN
R1IN
T3OUT
T2OUT
T1OUT
V-
C2-
GND
C2+
SSOP
MAX3237
28
27
26
25
24
23
22
21
20
19
18
17
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
C1+
V+
V
CC
GND
C1-
EN
R5OUT
SHDN
R1OUTB
R2OUTB
R1OUT
R2OUT
R3OUT
R4OUT
T1IN
T2IN
T3IN
T3OUT
T2OUT
T1OUT
R5IN
R4IN
R3IN
R2IN
R1IN
V-
C2-
C2+
SO/SSOP/TSSOP
MAX3241
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
______________________________________________________________________________________
15
______3V-Powered EIA/TIA-232 and EIA/TIA-562 Transceivers from Maxim
Ordering Information (continued)
* Dice are tested at T
A
= +25C, DC parameters only.
0.1F capacitors, 1 complemen-
tary receiver, MegaBaud
operation
232
250/1000
3
5/3
3.0 to 5.5
MAX3237
0.1F capacitors, AutoShutdown,
complementary receiver,
drives mice
232
120
1
3/5
3.0 to 5.5
MAX3243
0.1F capacitors
232
120
N/A
2/2
3.0 to 5.5
MAX3232
0.1F capacitors, AutoShutdown
232
120
2
2/2
3.0 to 5.5
MAX3223
0.1F capacitors
232
120
2
2/2
3.0 to 5.5
MAX3222
232
562
232
562
232
EIA/
TIA-232
OR 562
2.7 to 3.6
AutoShutdown, complementary
receiver, drives mice, transient
detection
235
5
3/5
MAX3212
0.1F capacitors
230
2
2/2
3.0 to 3.6
MAX563
Operates directly from batteries
without a voltage regulator
120
2
2/2
1.8 to 4.25
MAX218
No. OF
RECEIVERS
ACTIVE IN
SHUTDOWN
POWER-
SUPPLY
VOLTAGE
(V)
Wide supply range
230
5
3/5
2.7 to 5.25
MAX562
Drives mice
120
5
3/5
3.0 to 3.6
MAX212
FEATURES
GUAR-
ANTEED
DATA
RATE
(kbps)
No. OF
TRANSMITTERS/
RECEIVERS
PART
0.1F capacitors, 2 complemen-
tary receivers, drives mice
232
120
5
3/5
3.0 to 5.5
MAX3241
PART
MAX3222EUP
MAX3222EAP
MAX3222EWN
-40C to +85C
-40C to +85C
-40C to +85C
TEMP. RANGE
PIN-PACKAGE
20 TSSOP
20 SSOP
18 SO
MAX3222EPN
MAX3232
CUE
MAX3232CSE
0C to +70C
0C to +70C
-40C to +85C
18 Plastic DIP
16 TSSOP
16 Narrow SO
MAX3232CWE
MAX3232EUE
MAX3232ESE
-40C to +85C
-40C to +85C
0C to +70C
16 Wide SO
16 TSSOP
16 Narrow SO
MAX3222C/D
0C to +70C
Dice*
MAX3232CPE
0C to +70C
16 Plastic DIP
PART
TEMP. RANGE
PIN-PACKAGE
MAX3232EWE
MAX3237
CAI
MAX3237EAI
-40C to +85C
0C to +70C
-40C to +85C
16 Wide SO
28 SSOP
28 SSOP
MAX3241
CUI
0C to +70C
28 TSSOP
MAX3241CAI
MAX3241EUI
MAX3241EAI
-40C to +85C
-40C to +85C
0C to +70C
28 SSOP
28 TSSOP
28 SSOP
MAX3241EWI
-40C to +85C
28 SO
MAX3241CWI
0C to +70C
28 SO
MAX3232EPE
-40C to +85C
16 Plastic DIP
MAX3222/MAX3232/MAX3237/MAX3241
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232
Transceivers Using Four 0.1F External Capacitors
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16
____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
1999 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
___________________Chip Topography
___________________Chip Information
________________________________________________________Package Information
T1IN
T2IN
0.127"
(3.225mm)
0.087"
(2.209mm)
R2OUT
R2IN
T2OUT
R1OUT
R1IN
T1OUT
V
CC
V+
C1+
SHDN
EN
C1-
C2+
C2-
V-
GND
MAX3222
TRANSISTOR COUNT: 339
SUBSTRATE CONNECTED TO GND
MAX3222
339
MAX3232
339
MAX3237
1212
MAX3241
894
TRANSISTOR COUNT
PART
TSSOP.EPS
PDF 
ZIP