14.0
(.551)
Rev. No.
C
Revision Note
Date
1-5-99
Signature
RG
PART NUMBER
SPECIFICATION
ASSEMtech Europe Ltd
PRODUCT DATA SHEET
SWITCHING VOLTAGE
SWITCHING CURRENT
SWITCHING CAPACITY
OPERATING ANGLE
CONTACT RESISTANCE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
CASE MATERIAL
CABLE/TERMINATION
FEATURES
Max. Vac
Max. A
Max. VA
Max.
Deg
Max.
Deg. C
Deg. C
24
0.025
5
N/A
5
-37 +100
-40 +125
Steel - Gold plated
Pin
Non-mercury contacts
Omni-Directional
MOTION SWITCHES - Metal
MS 24
Drawings not to scale
All dimensions in mm
FORM AE043 ISS1
As part of the company policy of continued product improvement, specifications may change without notice. Our sales
office will be pleased to help you with the latest information on this product range and details of our full design and
manufacturing service. All products are supplied to our standard conditions of sale otherwise agreed in writing.
1996 Copyright Assemtech Europe Ltd.
BS5750/ISO 9000
Reg. No. FM 21080
8.2 (.323)
9.5
(.374)
Pin 1.0 (.039)
9.3 (.366)
4.7 (.185)
NOTE: When cutting switch leads it is important that the glass seal is not damaged. The cutting point should be no closer than
3mm to the glass to metal seal and the lead should be supported between the cutting point and the glass to metal seal.
Web Site
Patent App. 98 09677.9
This non-mercury sensor has been specifically designed for the detection of movement and vibration. The
sensor is non position sensitive offering a similar level of sensitivity whatever its position and has been
designed for use with analogue or digital circuitry. The sensor reacts when disturbed by giving a fleeting
change of state (ie n/o to n/c or vice versa). The time taken to settle depends on the amount of energy
absorbed by the device, the settled state will be random unless mounting attitude is chosen for a n/c
output.
The low contact resistance of this device makes it ideal for incorporating into new or existing designs.
PDF 
ZIP