GENERAL SPECIFICATIONS
Frequency Coverage: 0.02 to 18.0 GHz.
RF Impedance: 50 OHMS.
RF Power: +20 dBM operational. Consult factory
for high power options. 1 watt average,
10 watts peak survival.
DC Requirements: Switches without drivers require +60
mA maximum per path for the "off" con-
dition and 60 mA for the "on" condition.
Switches with drivers require 5 volt
supply at 130 mA. Logic "1" turns J2
"on" and J3 "off". Logic "0" turns J3 "on"
and J2 "off".
Temperature Information: Operating temperature from 55C to
+85C.
Switching Speed: 10% to 90% or 90% to 10% of RF.
There is an additional 30 nanosec of
driver delay.
Connectors: SMA.
BROADBAND
SPDT DIODE SWITCH SERIES XB, XL, XN
HIGH ISOLATION-REFLECTIVE AND ABSORPTIVE 0.0218 GHz
0.12
[0,305]
J
2
0.21
[0,533]
0.38
[9,7]
TYP.
SMA FEMALE
TYP.
0.78
[19,81]
A/2
D
A
E
J1
0.125[3,18] DIA THRU
2 MOUNTING
HOLES
B
C
LOGIC
+5V
-5V
GND
0.41
[10,41]
0.12
[0,305]
SMA FEMALE
TYP.
0.38[9,7]
TYP.
B
C
A/2
D
A
E
BIAS
2
BIAS
3
GND
J2
J1
J3
0.21
[0,533]
0.125[3,18]
DIA THRU
2 MOUNTING
HOLES
MECHANICAL OUTLINES
A B C D E
Outline in[mm] in[mm] in[mm] in[mm] in[mm]
1 1.55[39,37] 0.90[22,86] 0.30[7,6] 1.300[33,02] 0.25[6,4]
2 1.30[33,02] 0.75[19,1] 0.20[5,1] 1.050[26,7] 0.25[6,4]
3 1.55[39,37] 0.95[24,13] 0.30[7,6] 1.300[33,02] 0.35[8,9]
4 2.00[50,8] 1.00[25,4] 0.35[8,9] 1.750[4,45] 0.30[7,6]
5 1.55[39,37] 0.95[24,13] 0.30[7,6] 1.300[33,02] 0.25[6,4]
6 1.55[39,37] 1.20[30,48] 0.50[12,7] 1.300[33,02] 0.25[6,4]
7 1.55[39,37] 0.90[22,86] 0.30[7,6] 1.300[33,02] 0.25[6,4]
OUTLINE WITH DRIVER J1-INPUT OUTLINE WITHOUT DRIVER J1-INPUT
11-5-02
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
email: sales@mcekdi-integrated.com
See us on the web @ www.mcekdi-integrated.com
PDF 
ZIP