3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CMM1330
Features
t 40% Linear Power Added Efficiency
t 30 dBm Output Power (IS-136 TDMA)
t 30 dB Gain
t Low Cost, SO-8 Surface Mount Package
t Tested Under Digital Modulation
Applications
t IS-136 Handsets
t Wireless Local Loop Subscriber Units
t PCS Base Stations
Description
The CMM1330 is a 3V linear power amplifier
intended for use in PCS handsets, wireless local loop sub-
scriber units and PCS base stations. As a pin-compatible
member of the new
Triniti DXTM
amplifier family, the
CMM1330 offers maximum performance and flexibility. The
flexible amplifier can be biased to support the requirements
of PCS-1900, IS-136, or DCS-1800 systems.
The CMM1330 is packaged in a low-cost, space
efficient SO-8 power package that gives excellent electrical
stability and thermal handling performance with a R
of less
than 18 C/W. The part is designed to require minimal exter-
nal circuitry for bias matching, simplifying design and keep-
ing board space and cost to a minimum.
1.85 to 1.91 GHz
3V, 30 dBm PCS/PCN
Power Amplifier
Advanced Product Information
September 1996
(1 of 2)
Back plane is ground and
must be soldered to thermally
conductive ground plane.
Vg2 4
RF IN 1
Vg1 3
GND 2
6 RF OUT/Vd3
5 RF OUT/Vd3
8 Vd1
7 Vd2
Functional Block Diagram
Parameter
Condition
Min
Typ
Max
Units
Frequency Range
1.85
1.91
GHz
Power Output
Meets IS-136 TDMA mask
28.8
30.0
dBm
Efficiency
Pout IS-136 TDMA
30
35
%
Gain
28
30
dB
Harmonics (in Celeritek test fixture)
2nd @ Pout = +30.5 dBm
-30
dBc
3rd @ Pout = +30.5 dBm
-35
dBc
Return Loss
In Celeritek Test Fixture
10
dB
Negative Supply Current
1
mA
Supply Current
600
mA
Quiescent Current
No RF
300
mA
Electrical Characteristics
Unless otherwise specified the following specifications are guaranteed at room temperature with drain voltage (+Vd) = 3.6 V, in Celeritek test fixture.
Recommended Operating Conditions
Parameter
Typ
Units
Parameter
Typ
Units
Drain Voltage (+Vd)
3.0 to 4.0
Volts
Operating Temperature (PC Board)
-30 to +80
C
Absolute Maximum Ratings
Parameter
Rating
Parameter
Rating
Parameter
Rating
Drain Voltage (+Vd)
+9.0 V*
Power Dissipation
5 W
Operating Temperature
-40C to +100C
Drain Current (Id)
1.8 A
Thermal Resistance
18C/W
Channel Temperature
175C
RF Input Power
+15 dBm*
Storage Temperature
-65C to +150C
Soldering Temperature
260C for 5 Sec.
DC Gate Voltage (-Vg)
-4.0 V*
* Max (+Vd) and (-Vg) under linear operation. Max potential difference across the device in RF compression (2Vd + |-Vg|) not to exceed the minimum breakdown voltage (Vbr) of +18V.
3236 Scott Boulevard, Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating
parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent
rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or
other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent
regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.
Ordering Information
The CMM1330 is available in a surface mount SO-8 power package and devices are available in tape and reel.
Part Number for Ordering
Package
CMM1330-AK
SO-8 surface mount power package
CMM1330-AK-000T
SO-8 surface mount power package in tape and reel
Physical Dimensions
CMM1330
Advanced Product Information - September 1996
(2 of 2)
RF IN
Vg2
GND
Vg1
Vd2
4
3
2
1
5
6
7
8
MATCH
Vd3
MATCH
RF OUT/Vd3
Vd1
Connection Diagram and Pin Descriptions
Pin # Name
Description
1
RF IN
RF input (internally DC blocked)
2
GND
Ground
3
Vg1
Input stage gate bias
4
Vg2
Output stage gate bias
5
RF OUT/Vd3
RF output and Vd3. External matching cir-
cuit required
6
RF OUT/Vd3
RF output and Vd3. External matching cir-
cuit required
7
Vd2
Intermediate stage drain bias
8
Vd1
Input stage drain bias
PDF 
ZIP