ChipFind - документация

Электронный компонент: T2500NFP

Скачать:  PDF   ZIP
1
Motorola Thyristor Device Data
Silicon Bidirectional
Triode Thyristors
. . . designed primarily for full-wave ac control applications, such as solid-state relays,
motor controls, heating controls and power supplies; or wherever full-wave silicon
gate controlled solid-state devices are needed. Triac type thyristors switch from a
blocking to a conducting state for either polarity of applied anode voltage with positive
or negative gate triggering.
Blocking Voltage to 800 Volts
All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and
Stability
Small, Rugged, Isolated Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
MAXIMUM RATINGS
(TJ = 25
C unless otherwise noted.)
Rating
Symbol
Value
Unit
Repetitive Peak Off-State Voltage(1)
(TJ = 40 to +100
C, Gate Open)
T2500BFP
T2500DFP
T2500MFP
T2500NFP
VDRM
200
400
600
800
Volts
On-State RMS Current (TC = +80
C)(2)
(Full Cycle Sine Wave 50 to 60 Hz)
IT(RMS)
6
Amps
Peak Non-repetitive Surge Current
(One Full Cycle, 60 Hz, TC = +80
C)
ITSM
60
Amps
Circuit Fusing Considerations
(t = 8.3 ms)
I2t
40
A2s
Peak Gate Power
(TC = +80
C, Pulse Width = 1
s)
PGM
1
Watt
Average Gate Power
(TC = +80
C, t = 8.3 ms)
PG(AV)
0.2
Watt
Peak Gate Trigger Current (Pulse Width = 10
s)
IGTM
4
Amps
RMS Isolation Voltage (TA = 25
C, Relative Humidity
p
20%)
VISO
1500
Volts
Operating Junction Temperature Range
TJ
40 to +100
C
Storage Temperature Range
Tstg
40 to +150
C
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction to Case(2)
Case to Sink
Junction to Ambient
R
JC
R
CS
R
JA
2.7
2.2(typ)
60
C/W
1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. The case temperature reference point for all TC measurements is a point on the center lead of the package as close as possible to the plastic
body.
Order this document
by T2500FP/D
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Motorola, Inc. 1995
T2500FP
Series
CASE 221C-02
STYLE 3
ISOLATED TRIACs
THYRISTORS
6 AMPERES RMS
200 thru 800 VOLTS
MT1
G
MT2
T2500FP Series
2
Motorola Thyristor Device Data
ELECTRICAL CHARACTERISTICS
(TC = 25
C unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
Peak Off-State Current (Either Direction)
(VD = Rated VDRM, TJ = 100
C, Gate Open)
IDRM
--
--
2
mA
Maximum On-State Voltage (Either Direction)*
(IT = 30 A Peak)
VTM
--
--
2
Volts
Gate Trigger Current (Continuous dc)
(VD = 12 Vdc, RL = 12 Ohms)
MT2(+), G(+)
MT2(+), G()
MT2(), G()
MT2(), G(+)
IGT
--
--
--
--
10
20
15
30
25
60
25
60
mA
Gate Trigger Voltage (Continuous dc) (All Quadrants)
(VD = 12 Vdc, RL = 12 Ohms)
(VD = VDROM, RL = 125 Ohms, TC = 100
C, All Trigger Models)
VGT
--
0.2
1.25
--
2.5
--
Volts
Holding Current (Either Direction)
(Main Terminal Voltage = 12 Vdc, Gate Open,
Initiating Current = 150 mA, TC = 25
C)
IH
--
15
30
mA
Gate Controlled Turn-On Time
(VD = Rated VDRM, IT = 10 A,
IGT = 160 mA, Rise Time
p
0.1
s)
tgt
--
1.6
--
s
Critical Rate-of-Rise of Commutation Voltage
(VD = Rated VDRM, IT(RMS) = 6 A,
Commutating di/dt = 3.2 A/ms,
Gate Unenergized, TC = 80
C)
dv/dt(c)
--
10
--
V/
s
Critical Rate-of-Rise of Off-State Voltage
(VD = Rated VDRM, Exponential Voltage Rise,
Gate Open, TC = 100
C)
dv/dt
--
100
--
V/
s
*Pulse Test: Pulse Width
p
300
s, Duty Cycle
p
2%.
Electrical Characteristics of Recommended
Bidirectional Switches
Usage
General
Part Number
MBS4991
MBS4992
VS
6 10 V
7.5 9 V
IS
350
A Max
120
A Max
VS1 VS2
0.5 V Max
0.2 V Max
Temperature
Coefficient
0.02%/
C Typ
Trigger devices are recommended
for gating on Triacs. They provide:
1. Consistent predictable turn-on
points.
2. Simplified circuitry.
3. Fast turn-on time for cooler,
more efficient and reliable
operation.
Quadrant Definitions
Quadrant II
Quadrant I
Quadrant III
Quadrant IV
MT2(+)
MT2()
MT2(+), G()
MT2(+), G(+)
MT2(), G()
MT2(), G(+)
G()
G(+)
T2500FP Series
3
Motorola Thyristor Device Data
PACKAGE DIMENSIONS
CASE 221C02
1 2 3
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. LEAD DIMENSIONS UNCONTROLLED WITHIN
DIMENSION Z.
STYLE 3:
PIN 1. MT 1
2. MT 2
3. GATE
Y
B
T
Q
P
A
K
H
Z
G
L
F
D
3 PL
M
B
M
0.25 (0.010)
Y
E
N
S
J
R
C
SEATING
PLANE
DIM
MIN
MAX
MIN
MAX
MILLIMETERS
INCHES
A
0.680
0.700
17.28
17.78
B
0.388
0.408
9.86
10.36
C
0.175
0.195
4.45
4.95
D
0.025
0.040
0.64
1.01
E
0.340
0.355
8.64
9.01
F
0.140
0.150
3.56
3.81
G
0.100 BSC
2.54 BSC
H
0.110
0.155
2.80
3.93
J
0.018
0.028
0.46
0.71
K
0.500
0.550
12.70
13.97
L
0.045
0.070
1.15
1.77
N
0.049
1.25
P
0.270
0.290
6.86
7.36
Q
0.480
0.500
12.20
12.70
R
0.090
0.120
2.29
3.04
S
0.105
0.115
2.67
2.92
Z
0.070
0.090
1.78
2.28
T2500FP Series
4
Motorola Thyristor Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different
applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Literature Distribution Centers:
USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036.
EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England.
JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan.
ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
T2500FP/D
*T2500FP/D*