CONTENTS

Recycled Paper

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

· This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Part Numbering

CERAFILr 10.7MHz Small Chip Type SFECS Series

CERAFILr 10.7MHz Ultra Thin Chip Type SFECD Series

CERAFILr 10.7MHz Chip Type SFECV Series

CERAFILr 10.7MHz Standard Lead Type

CERAFILr 10.7MHz Low Loss Type

CERAFILr 10.7MHz Low Profile Type

CERAFILr 10.7MHz Low Spurious Response Type

CERAFILr 10.7MHz Wide Bandwidth Type

CERAFILr 10.7MHz Narrow Bandwidth Type

CERAFILr 10.7MHz for FM-IF Tuners

CERAFILr 10.7MHz High Selectivity Type SFTLA Series

CERAFILr 10.7MHz Related Data on Lead Type

CERAFILr 4.5-6.5MHz Chip Type SFSKA Series

CERAFILr 4.5-6.5MHz Standard Lead Type SFSRA Series

CERAFILr 3.5-6.5MHz Low Profile Type SFSRL Series

CERAFILr 3.5-6.5MHz for Chroma Signal SFSRA/L Series

CERAFILr 455kHz Chip Type PFWCC Series

CERAFILr 455kHz Chip Type SFPCA Series

CERAFILr 455kHz SFULA/SFZLA Series

CERAFILr 455kHz PFSLA/PFWLA Series

CERAFILr 455kHz SFPLA/CFWLA Series

CERAFILr 455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series

CERAFILr 455kHz for Search-stop Signal Detection

CERAFILr 455kHz SF/PF Series Temperature Characteristics

CERAFILr 455kHz SF/PF/BF Series Application Circuit

Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series

Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series

Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series

Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series

Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series

Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series

Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series

Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series

Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series

Ceramic Discriminator 10.7MHz Appllied IC Reference Table

Ceramic Discriminator 10.7MHz Appllied Circuit

Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series

Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series

Notice (Soldering and Mounting)

Notice (Handling)

100

Packaging

107

CERAFILr and "CERAFIL" in this catalog are

the trademarks of Murata Manufacturing Co., Ltd.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Part Numbering

10M7

FAA0

-B0

(Global Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFIL

for FM

Ceramic Filters

Four-digit alphanumerics express
pass-bandwidth, center frequency tolerance,
rank, series, others.

Product ID

tProduct Specification

FAA0

Code

Product Specification

p is expressed "

" or subsequent code, which indicates the size.

eStructure/Size

Bulk

Plastic Taping ш180mm

Plastic Taping ш330mm

1500pcs. /Radial Taping H

=18mm

1000pcs. /Radial Taping H

=18mm

yPackaging

-B0

-R0

-R1

-A0

-A1

Code

Packaging

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "

tProduct Specification"

and "

yPackaging".

2 Elements Thickness Expander mode

3 Elements Thickness Expander mode

2 Elements Thickness Expander mode

(2nd Harmonic)

2 Elements Thickness Expander mode

(3rd Over Tone)

Code

Oscillation/Numbers of Element

Lead Type

Chip Type

Code

Structure/Size

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".

-B0

4M50

(Global Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFIL

for TV/VCR

Ceramic Filters

Product ID

tProduct Specification Code (1)

Code

Product Specification Code (1)

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, two-digit alphanumerics indicating
"Individual Specification" is added between "

tProduct Specification

Code (1)" and "

yProduct Specification Code (2)".

eStructure/Size

Bulk

Radial Taping H

=18mm

Plastic Taping ш=330mm

Standard Bandwidth Type

Tight Bandwidth Type

Standard Bandwidth Type

Broad Bandwidth Type

Ultra-broad Bandwidth Type

yProduct Specification Code (2)

Code

Product Specification Code (2)

Standard Type

uPackaging

-B0

-A0

-R1

Code

Packaging

2 Elements Thickness Shear mode

3 Elements Thickness Expander mode

Code

Oscillation/Numbers of Element

Lead Type

Chip Type

Code

Structure/Size

p is expressed "

" or subsequent code, which indicates the size.

The code

is only applied to

SFT

series.

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

(Global Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFIL

for AM

Ceramic Filters

Standard Type

Product ID

tProduct Specification

P2A

Code

Product Specification

indicates standard type.

p is "

" or subsequent code, which indicates the size. It varies

depending on vibration mode and number of elements.

eStructure/Size

Bulk

Plastic Taping (ш180mm)

Plastic Taping (ш330mm)

Radial Taping H

=18mm

Magazine Cassette

yPackaging

-B0

-R0

-R1

-A0

-M0

Code

Packaging

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "

tProduct Specification"

and "

yPackaging".

1 Element Length mode

2 Elements Length mode

1 Element Area Expansion mode

2 Elements Area Expansion mode

4 Elements Area Expansion mode

Code

Oscillation/Numbers of Element

Lead Type

Chip Type

Code

Structure/Size

-B0

450K

P2A

-B0

450K

(Global Part Number)

qProduct ID

wOscillation/Numbers of Element

CERAFIL

for Search-stop Signal Detection

Resonator

Bandwidth

Product ID

tProduct Specification

Code

Product Specification

rNominal Center Frequency

With standard type, p is omitted.

eStructure/Size

450kHz

450K

Code

Nominal Center Frequency

Bulk

yPackaging

-B0

Code

Packaging

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, "Individual Specification (serial number)"
and "Lead Shape (Lead Bend :

)" are added between "

tProduct

Specification" and "

yPackage Specification Code" upon

specification.

1 Element Area Expansion mode

Code

Oscillation/Numbers of Element

Lead Type Standard

Code

Structure/Size

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "

" following three figures expresses the unit of

"kHz".

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

10M7

-B0

001

(Global Part Number)

qProduct ID

wOscillation

Discriminators for FM

Discriminators

Product ID

tProduct Specification

Code

Product Specification

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between "

yIC" and "uPackaging".

eStructure/Size

Bulk

Radial Taping H

=18mm

Plastic Taping ш=180mm

Plastic Taping ш=330mm

yIC

001

Code

Applicable IC Control Code

uPackaging

-B0

-A0

-R0

-R1

Code

Packaging

Thickness Expander mode

Thickness Shear mode

Code

Oscillation

Lead Type

Chip Type

Code

Structure/Size

p is expressed "

" or subsequent code, which indicates the size.

Two-digit alphanumerics express
type, center frequency, rank, others

rNominal Center Frequency
Expressed by four-digit alphanumerics . The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".

-B0

4M50

(Global Part Number)

qProduct ID

wFunction

Ceramic Traps

Product ID

tProduct Specification Code (1)

Code

Product Specification (1)

Radial taping is applied to lead type and plastic taping to chip type.
With non-standard products, three-digit alphanumerics indicating
"Individual Specification" is added between "

yProduct Specification

Code (2)" and "

uPackaging".

eStructure/Size

Bulk

Radial Taping H

=18mm

Plastic Taping ш=330mm

Broad-bandwidth Type

Low-capacitance Type

yProduct Specification Code (2)

Code

Product Specification Code (2)

Standard Type

uPackaging

-B0

-A0

-R1

Code

Packaging

Single Traps

Triple Traps

Double Traps

Code

Function

Lead Type

Chip Type

Code

Structure/Size

p is expressed "

" or subsequent code, which indicates the size.

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

4M50

-A0

048

(Global Part Number)

qProduct ID

wOscillation

Discriminators for TV/VCR

Discriminators

Product ID

tProduct Specification Code (1)

Code

Product Specification Code (1)

With non-standard products, a letter Indicating "Individual
Specification" is added between "

uIC" and "iPackaging".

eStructure/Size

Bulk

Radial Taping H

=18mm

Three-terminals

Two-terminals

yProduct Specification Code (2)

Code

Product Specification Code (2)

Specification

uIC

048

Code

Applicable IC control code

iPackaging

-B0

-A0

Code

Packaging

Thickness Shear mode

Code

Oscillation

Standard Type

Low-profile

Code

Structure/Size

rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M".

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Small Chip Type SFECS Series

SFECS10M7 series for FM-receivers are small, high

performance and super thin (1.5mm max.) filters.

Piezoelectric element is connected in the sandwich

shape by ceramics substrate.

They have 1.5mm max. thickness and small mounting area.

(3.45x3.1mm)

SFECS series and PFWCC (kHz filter for AM receiver)

enable customers to make AM/FM set so thin and small

sized.

s Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.5mm max. thickness, and

have a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Various bandwidths are available. Select a

suitable type in accordance with the desired

selectivity.

4. Operating temperature range :

-20 to +80 (degree C)

Storage temperature range :

-40 to +85 (degree C)

s Applications

1. Small, thin radios

2. Headphone stereos

Input electrode marker

3.45

0.2

3.10

0.2

1.4

0.1

(1)

(4)

(2)

(3)

0.7

0.3 0.7

0.3

(1.30) (1.30)

0.85

0.3

0.85

0.3

0~0.3

0.6

0.3

(1.35) (1.35)

0.6

0.3

0~0.3

0.4

+0.3

-0.2

(1) : Input
(2) : Ground
(3) : Float (Signal line)
(4) : Output
( ) : Reference

: EIAJ Monthly Code

(in mm)

Part Number

Center

Frequency (fo)

(MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFECS10M7HA00-R0

10.700

30kHz

180

40kHz

470 max.

4.5

2.0dB

30 min.

330

SFECS10M7GA00-R0

10.700

30kHz

230

50kHz

510 max.

3.5

2.0dB

30 min.

330

SFECS10M7FA00-R0

10.700

30kHz

280

50kHz

590 max.

3.0

2.0dB

30 min.

330

SFECS10M7EA00-R0

10.700

30kHz

330

50kHz

700 max.

3.0

2.0dB

30 min.

330

SFECS10M7DF0021-R0

10.700

200kHz min.

950 max.

3.0

2.0dB

20 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Combination A,B,C,D,E

Combination A,B,C

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Standard Land Pattern Dimensions

(4)

(1)

(2)

(3)

0.8

0.6

0.8

0.6

0.8

(1) : Input (2) : Ground (3) : Float Signal Line (4) : Out put

(in mm)

It shows solder resist land pattern.

.
3

.
0

.
4

.
0

0.1

.
1

s Test Circuit

Rg=50

R1=280

R2=330

C2=10pF
(Including stray capacitance
and Input capacitance of RF Voltmeter)

RF
Voltmeter

S.S.G.
=-10dBm

(4)

(1)

(2)

(3)

(1) : Input
(2) : Ground
(3) : Float
(4) : Output

s Frequency Characteristics

SFECS10M7HA00-R0

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

5.00

4.80

4.60

4.40

4.20

4.00

3.80

3.60

5.60

5.40

5.20

10.500

10.600

10.700

10.800

10.900

SFECS10M7GA00-R0

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

5.00

4.80

4.60

4.40

4.20

4.00

3.80

3.60

3.40

3.20

3.00

10.500

10.600

10.700

10.800

10.900

SFECS10M7FA00-R0

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

4.60

4.40

4.20

4.00

3.80

3.60

3.40

3.20

3.00

2.80

2.60

10.500

10.600

10.700

10.800

10.900

s Frequency Characteristics (Spurious)

SFECS10M7HA00-R0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

8.700

9.700

10.700

11.700

12.700

SFECS10M7GA00-R0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

8.700

9.700

10.700

11.700

12.700

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

SFECS10M7FA00-R0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

8.700

9.700

10.700

11.700

12.700

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Ultra Thin Chip Type SFECD Series

SFECD10M7 series for FM-receivers are small, high

performance and ultra thin (1.0mm max.) filters.

Piezoelectric element is connected in the sandwich

shape by very thin ceramics substrate.

They have 1.0mm max. thickness and small mounting area.

(3.45x3.1mm)

SFECD series enable customers to make RF modules so

thin and small sized.

s Features

1. The filters are mountable by automatic placers.

2. They are slim, at only 1.0mm max. thickness, and

have a small mounting area (3.45x3.1mm) enabling

flexible PCB design.

3. Operating temperature range :

-20 to +80 (degree C)

Storage temperature range :

-40 to +85 (degree C)

s Applications

1. Card type radios

2. Card type RKE modules

3. Card type PHS modules

: Marking
: EIAJ Monthly Code
: Center Frequency
Rank Code
: Reference

( )

(in mm)

1.0 max.

.
1

.
2

3.45

0.2

(0.6) (0.6) (0.6)

(1.28)

0 to 0.4

(4)

(1.28)(1.28)

0.65

0.3

.
8

.
3

.
8

.
3

0 to 0.35

0 to 0.4

.
7

.
3

(2) (3)

(1)

(2) (3)

0.65

0.3

0.55

0.3

(1) : Input
(2) : Ground
(3) : Float (Signal line)
(4) : Output

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFECD10M7FA00-R0

10.700

30kHz

280

50kHz

590 max.

3.0

2.0dB

30 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Combination A,B,C,D,E

Combination A,B,C

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Standard Land Pattern Dimensions

(4)

(2)

(3)

(1)

(2)

(3)

0.8

0.5

0.8

0.5

0.8

(1) : Input (2) : Ground (3) : Float (Signal Line) (4) : Output

(in mm)

It shows solder resist land pattern.

.
3

.
0

.
4

.
0

0.1

.
1

s Test Circuit

R1+Rg=R2=330

5%, Rg=50

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1 : S.S.G. Output Voltage

(1) : Input
(2) : Ground
(3) : Float
(4) : Output

RF
Voltmeter

S.S.G.

(4)

(1)

(2)

(3)

(2)

(3)

s Frequency Characteristics

SFECD10M7FA00-R0

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

10.500

10.600

10.700

10.800

10.900

s Frequency Characteristics (Spurious)

SFECD10M7FA00-R0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

8.700

9.700

10.700

11.700

12.700

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Chip Type SFECV Series

SFECV10M7 series for FM-receivers are monolithic type

ceramic filters which utilize the thickness expander

mode of the piezoelectric ceramic. SFECV series and

PFWCC(kHz filter for AM receiver) enable customers to

make AM/FM set so thin, and it can be of help to the

total chip circuit.

s Features

1. Piezoelectric element is connected in the sandwich

shape by heat resistant substrate, thus it has

excellent mechanical strength, and it is

suitable for automatic mounting.

2. Various bandwidths are available. Select a suitable

type in accordance with the desired selectivity.

s Applications

1. Small, thin radios

2. Automotive radios

3. Headphone steros

6.9

0.3

.
9

.
3

.
5

.
2

4.05

0.4

Bottom Electrode

Side Electrode

1.2

0.5

1.0

0.5

1.0

0.5

1.2

0.3

1.2

0.5

1.5

0.2

(3)

(2)

(1)

(1) : Input
(2) : Ground
(3) : Output

: EIAJ Monthly Code

: Center Frequency Rank Code

: Marking

(in mm)

1.0

0.5

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFECV10M7KA00-R0

10.700

30kHz

110

30kHz

320 max.

6.0

2.0dB

35 min.

330

SFECV10M7JA00-R0

10.700

30kHz

150

40kHz

380 max.

5.5

2.0dB

35 min.

330

SFECV10M7HA00-R0

10.700

30kHz

180

40kHz

470 max.

4.0

2.0dB

35 min.

330

SFECV10M7GA00-R0

10.700

30kHz

230

50kHz

510 max.

3.5

2.0dB

35 min.

330

SFECV10M7FA00-R0

10.700

30kHz

280

50kHz

590 max.

3.0

2.0dB

35 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Combination A,B,C,D,E

Combination A,B,C

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Standard Land Pattern Dimensions

(in mm)

Land

1.2

1.65

2.85

1.65

1.2

.
0

s Test Circuit

(1)

(3)

(2)

RF
Voltmeter

S.S.G.
=-10dBm

Rg = 50

= 280

5% R

= 330

= 10

2 pF (Including stray capacitance and Input capacitance

of RF Volt Meter)
E

: S.S.G. S.S.G. Output Voltage

(1): Input
(2): Ground
(3): Output

s Frequency Characteristics

SFECV10M7KA00-R0

10.500

3.50

4.00

4.50

5.00

5.50

6.00

6.50

7.00

10.600

10.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.800

10.900

.
D

.
T

.

(

.
)

SFECV10M7JA00-R0

10.620

4.50

5.00

5.50

6.00

6.50

7.00

7.50

8.00

10.660

10.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.740

10.780

.
D

.
T

.

(

.
)

SFECV10M7HA00-R0

6.00

5.50

5.00

4.50

4.00

3.50

3.00

2.50

10.500

10.700

10.800

10.900

10.600

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

SFECV10M7GA00-R0

5.50

5.00

4.50

4.00

3.50

3.00

2.50

2.00

10.500

10.600

10.700

10.800

10.900

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

SFECV10M7FA00-R0

5.00

4.50

4.00

3.50

3.00

2.50

2.00

1.50

10.500

10.600

10.700

10.800

10.900

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics (Spurious)

SFECV10M7KA00-R0

8.700

9.700

10.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

11.700

12.700

SFECV10M7JA00-R0

8.700

9.700

10.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

11.700

12.700

SFECV10M7HA00-R0

8.700

10.700

9.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFECV10M7GA00-R0

8.700

10.700

9.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFECV10M7FA00-R0

8.700

10.700

9.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Standard Lead Type

SFELA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

1. These miniature filters have high mechanical

strength.

2. Low loss, favorable waveform symmetry, and high

selectivity

3. Various band widths are available for applications

in wide to narrow bands.

4. Small dispersion and stable characteristics

5. Change in center frequency is typically within

+-30ppm/(degree C) at -20 to +80 (degree C).

6. High reliability

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7HA00-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GA00-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7FA00-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFELA10M7HA00-B0

10.700

30kHz

180

40kHz

520 max.

7.0 max.

40 min.

330

SFELA10M7GA00-B0

10.700

30kHz

230

50kHz

570 max.

4.0

2.0dB

40 min.

330

SFELA10M7FA00-B0

10.700

30kHz

280

50kHz

650 max.

4.0

2.0dB

30 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELA10M7HA00-B0

6.00

5.50

5.00

4.50

4.00

3.50

3.00

2.50

10.500

10.600

10.700

10.800

10.900

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

SFELA10M7GA00-B0

5.50

5.00

4.50

4.00

3.50

3.00

2.50

2.00

10.500

10.600

10.700

10.800

10.900

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

SFELA10M7FA00-B0

5.00

4.50

4.00

3.50

3.00

2.50

2.00

1.50

10.500

10.600

10.700

10.800

10.900

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics (Spurious)

SFELA10M7HA00-B0

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFELA10M7GA00-B0

70
8.700

9.700

10.700

11.700

12.700

t
t
e

t
i
o

(
d

)

Frequency (MHz)

SFELA10M7FA00-B0

70
8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Low Loss Type

SFELA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

1. Insertion loss is 1 to 1.5dB lower than

conventional products. These types are useful for

elevating the sensitivity of sets.

2. Small dispersion and stable characteristics

3. Excellent shape factor of frequency response

4. Good waveform symmetry

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7JAA0-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7HAA0-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GAA0-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7FAA0-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFELA10M7JAA0-B0

10.700

30kHz

150

40kHz

360 max.

4.5

2.0dB

35 min.

330

SFELA10M7HAA0-B0

10.700

30kHz

180

40kHz

470 max.

3.5

1.5dB

35 min.

330

SFELA10M7GAA0-B0

10.700

30kHz

230

50kHz

520 max.

3.0

2.0dB

35 min.

330

SFELA10M7FAA0-B0

10.700

30kHz

280

50kHz

590 max.

2.5

2.0dB

30 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELA10M7JAA0-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

7.50

Frequency (MHz)

.
D

.
T

.

(

.
)

7.00

6.50

6.00

5.50

5.00

4.50

4.00

SFELA10M7HAA0-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.50

6.00

5.50

5.00

4.50

4.00

3.50

3.00

Frequency (MHz)

.
D

.
T

.

(

.
)

SFELA10M7GAA0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.500

10.600

10.700

10.800

10.900

6.50

6.00

5.50

5.00

4.50

4.00

3.50

3.00

SFELA10M7FAA0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

5.50

5.00

4.50

10.600

10.500

10.700

10.800

10.900

4.00

3.50

3.00

2.50

2.00

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics (Spurious)

SFELA10M7JAA0-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7HAA0-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7GAA0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

SFELA10M7FAA0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

70
8.700

9.700

10.700

11.700

12.700

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Low Profile Type

SFELB10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expancder mode

of the piezoelectric ceramic.

s Features

1. Installed height is 6.0 mm, making it well suited

for compact, thin sets.

2. Environmental reliability is the same as those of

the ceramic filter SFELA10M7 series.

.
0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

2.5

0.2

1.3

0.1

.
3

.
1

0.5

0.1

1.5

0.1

E I A J

C O D E

M A R K I N G

in mm

(1) : Input
(2) : Ground
(3) : Output

SFELB10M7KA00-B0

.
0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

2.5

0.2

1.3

0.1

.
3

.
1

0.5

0.1

1.5

0.1

E I A J

C O D E

M A R K I N G

in mm

(1) : Input
(2) : Ground
(3) : Output

SFELB10M7JA00-B0

.
0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

2.5

0.2

1.3

0.1

.
3

.
1

0.5

0.1

1.5

0.1

E I A J

C O D E

M A R K I N G

in mm

(1) : Input
(2) : Ground
(3) : Output

SFELB10M7HA00-B0

.
0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

2.5

0.2

1.3

0.1

.
3

.
1

0.5

0.1

1.5

0.1

E I A J

C O D E

M A R K I N G

in mm

(1) : Input
(2) : Ground
(3) : Output

SFELB10M7GA00-B0

.
0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

2.5

0.2

1.3

0.1

.
3

.
1

0.5

0.1

1.5

0.1

E I A J

C O D E

M A R K I N G

in mm

(1) : Input
(2) : Ground
(3) : Output

SFELB10M7FA00-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFELB10M7KA00-B0

10.700

30kHz

110

30kHz

350 max.

7.0

2.0dB

30 min.

330

SFELB10M7JA00-B0

10.700

30kHz

150

40kHz

360 max.

4.5

2.0dB

35 min.

330

SFELB10M7HA00-B0

10.700

30kHz

180

40kHz

470 max.

3.5

2.0dB

35 min.

330

SFELB10M7GA00-B0

10.700

30kHz

230

50kHz

570 max.

3.0

2.0dB

40 min.

330

SFELB10M7FA00-B0

10.700

30kHz

280

50kHz

650 max.

3.0

2.0dB

30 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELB10M7KA00-B0

t
t
e

t
i
o

(
d

)

10.620

10.660

10.700

10.740

10.780

8.00

Frequency (MHz)

.
D

.
T

.

(

.
)

7.50

7.00

6.50

6.00

5.50

5.00

4.50

SFELB10M7JA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.700

7.00

10.600

10.500

10.800

10.900

6.50

6.00

5.50

5.00

4.50

4.00

7.50

SFELB10M7HA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.700

10.600

10.500

10.800

10.900

7.00

6.50

6.00

5.50

5.00

4.50

4.00

3.50

SFELB10M7GA00-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.50

Frequency (MHz)

.
D

.
T

.

(

.
)

6.00

5.50

5.00

4.50

4.00

3.50

3.00

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

SFELB10M7FA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.700

10.800

10.900

10.600

10.500

5.50

5.00

4.50

4.00

3.50

3.00

2.50

2.00

s Frequency Characteristics (Spurious)

SFELB10M7KA00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELB10M7JA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.700

9.700

8.700

11.700

12.700

SFELB10M7HA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.700

9.700

8.700

11.700

12.700

SFELB10M7GA00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELB10M7FA00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.700

11.700

12.700

9.700

8.700

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Low Spurious Response Type

SFELA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

These types have lower spurious response compared

to the standard filters.

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

MARKING

EIAJ
CODE

SFELA10M7KAB0-B0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

MARKING

EIAJ
CODE

SFELA10M7JAB0-B0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

MARKING

EIAJ
CODE

SFELA10M7HAB0-B0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

MARKING

EIAJ
CODE

SFELA10M7GAB0-B0

(1)

(2)

(3)

7.5

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

MARKING

EIAJ
CODE

SFELA10M7FAB0-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFELA10M7KAB0-B0

10.700

30kHz

110

30kHz

350 max.

7.0

2.0dB

45/30 min.

330

SFELA10M7JAB0-B0

10.700

30kHz

150

40kHz

380 max.

5.5

2.0dB

45 min.

330

SFELA10M7HAB0-B0

10.700

30kHz

180

40kHz

520 max.

5.0

2.0dB

45 min.

330

SFELA10M7GAB0-B0

10.700

30kHz

230

50kHz

570 max.

3.0

2.0dB

45 min.

330

SFELA10M7FAB0-B0

10.700

30kHz

280

50kHz

650 max.

3.0

2.0dB

45 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to fo / fo to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELA10M7KAB0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.700

10.740

10.780

10.660

10.620

8.00

7.50

7.00

6.50

6.00

5.50

5.00

4.50

SFELA10M7JAB0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

10.700

10.800

10.900

10.600

10.500

7.00

6.50

6.00

5.50

5.00

4.50

4.00

3.50

SFELA10M7HAB0-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.50

Frequency (MHz)

.
D

.
T

.

(

.
)

6.00

5.50

5.00

4.50

4.00

3.50

3.00

SFELA10M7GAB0-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.00

Frequency (MHz)

.
D

.
T

.

(

.
)

5.50

5.00

4.50

4.00

3.50

3.00

2.50

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

SFELA10M7FAB0-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

5.00

Frequency (MHz)

.
D

.
T

.

(

.
)

4.50

4.00

3.50

3.00

2.50

2.00

1.50

s Frequency Characteristics (Spurious)

SFELA10M7KAB0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.700

11.700

12.700

8.700

9.700

SFELA10M7JAB0-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.700

11.700

12.700

8.700

9.700

SFELA10M7HAB0-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7GAB0-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7FAB0-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Wide Bandwidth Type

SFELA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

Realizes widerband characteristics not obtained by

conventional ceramic filters.

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7EA00-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7DF00-B0

Part Number

Center

Frequency (fo)

(MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFELA10M7EA00-B0

10.700

30kHz

330

50kHz

680 max.

4.0

2.0dB

30 min.

330

SFELA10M7DF00-B0

10.700

175 min.

950 max.

3.0

2.0dB

20 min.

470

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 8MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

(fn) means nominal center frequency.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELA10M7EA00-B0

4.50

4.00

3.50

3.00

2.50

2.00

1.50

1.00

10.300

10.500

10.700

10.900

11.100

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

SFELA10M7DF00-B0

4.00

3.50

3.00

2.50

2.00

1.50

1.00

0.50

10.300

10.500

10.700

10.900

11.100

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

Frequency (MHz)

s Frequency Characteristics (Spurious)

SFELA10M7EA00-B0

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFELA10M7DF00-B0

70
8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz Narrow Bandwidth Type

s Features

SFELA10M7LFTA/KAH0, SFVLA/SFKLA series realizes

narrower band characteristics not obtained by

conventional ceramic filters. Besides, low spurious

and temperature characteristics are stable. This series

is suitable for European car-audio or AM up conversion

use that needs narrow band characteristics.

M A R K I N G

7 . 0

2 . 0

2.5

0.2

0 . 5

0 . 1

1 . 4

0 . 1

1 . 6 5

0 . 1

2.5

0.2

.
0

.
3

.
1

( 3 )

( 2 )

( 1 )

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFVLA10M7MF00-B0

M A R K I N G

7 . 0

2 . 0

2.5

0.2

0 . 5

0 . 1

1 . 4

0 . 1

1 . 6 5

0 . 1

2.5

0.2

.
0

.
3

.
1

( 3 )

( 2 )

( 1 )

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFVLA10M7LF00-B0

(1)

(2)

(3)

10.0

2.0

.
0

.
5

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J

C O D E

.
5

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFKLA10M7NL00-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7LFTA-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7KAH0-B0

Part Number

Center

Frequency (fo)

(MHz)

Nominal Center

Frequency (fn)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFVLA10M7MF00-B0

10.700

13 min.

135 max.

5.0

2.0dB

35 min.

330

SFVLA10M7LF00-B0

10.700

25 min.

5.5

2.5dB

30 min.

330

SFKLA10M7NL00-B0

10.700

15kHz

20 min.

95 max.

6.0 max.

24 min.

600

SFELA10M7LFTA-B0

10.700

25 min.

280 max.

7.0

2.0dB

30 min.

330

SFELA10M7KAH0-B0

10.700

30kHz

110

30kHz

350 max.

7.0

2.0dB

30 min.

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code (SFELA10M7KAH0-B0)

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFVLA10M7MF00-B0

t
t
e

t
i
o

(
d

)

10.620

10.660

10.700

10.740

10.780

19.0

Frequency (MHz)

.
D

.
T

.

(

.
)

18.0

17.0

16.0

15.0

14.0

13.0

12.0

SFVLA10M7LF00-B0

t
t
e

t
i
o

(
d

)

10.620

10.660

10.700

10.740

10.780

13.0

Frequency (MHz)

.
D

.
T

.

(

.
)

12.0

11.0

10.0

9.00

8.00

7.00

6.00

SFKLA10M7NL00-B0

t
t
e

t
i
o

(
d

)

10.600

10.650

10.700

10.750

10.800

Frequency (kHz)

SFELA10M7LFTA01-B0

6.50

7.00

7.50

8.00

8.50

9.00

9.50

10.00

10.580

10.640

10.700

Frequency (MHz)

10.760

10.820

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

11.00

10.50

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

SFELA10M7KAH0-B0

8.00

7.50

7.00

6.50

6.00

5.50

5.00

4.50

10.620

10.660

10.700

10.740

10.780

Frequency (MHz)

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

s Frequency Characteristics (Spurious)

SFVLA10M7MF00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFVLA10M7LF00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFKLA10M7NL00-B0

9.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

10.200

10.700

11.200

11.700

SFELA10M7LFTA01-B0

10.700

10.200

9.700

11.200

11.700

t
t
e

t
i
o

(
d

)

Frequency (MHz)

SFELA10M7KAH0-B0

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz for FM-IF Tuners

SFELA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

1. Little dispersion of amplitude characteristics and

phase characteristics (G. D. T. characteristics)

2. The SFELA10M7G_X series has G. D. T. characteristics

and is useful for obtaining low distortion.

SFELA10M7F_L series, in these ceramic filters,

being in harmony with flatness of G. D. T.,

roundness of the amplitude and selectivity

characteristics, therefore, these ceramic filters

are suitable to high-grade stereo tuners. Even in

mismatching conditions, they can keep little

distortion because of low Qm of ceramic material.

The SFELA10M7FA0G series is based on

SFELA10M7FA00/GA00/HA00, and it obtains high

selectivity with low loss.

There is little dispersion of amplitude and

G. D. T. characteristics, and low distortion rate

can be obtained.

3. All products are inspected the flatness of G. D. T.

characteristics.

M A R K I N G

9 . 0 m a x .

0 . 5

0 . 1

1 . 7

0 . 1

1 . 3 8

0 . 2

.
0

.
3

.
1

2.5

0.2 2.5

0.2

( 3 )

( 2 )

( 1 )

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7JAXE-B0

M A R K I N G

9 . 0 m a x .

0 . 5

0 . 1

1 . 7

0 . 1

1 . 3 8

0 . 2

.
0

.
3

.
1

2.5

0.2 2.5

0.2

( 3 )

( 2 )

( 1 )

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7HAXD-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7HA0G-B0

M A R K I N G

E I A J

C O D E

9 . 0 m a x .

0 . 5

0 . 1

1 . 7

0 . 1

1 . 3 8

0 . 2

.
0

.
3

.
1

2.5

0.2 2.5

0.2

( 3 )

( 2 )

( 1 )

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GAXX-B0

M A R K I N G

E I A J

C O D E

9 . 0 m a x .

0 . 5

0 . 1

1 . 7

0 . 1

1 . 3 8

0 . 2

.
0

.
3

.
1

2.5

0.2 2.5

0.2

( 3 )

( 2 )

( 1 )

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GAXA-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GALP03-B0

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GALM-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7GA0G-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7FALL-B0

(1)

(2)

(3)

7.0

2.0

.
0

2.5

0.2

0.5

0.1

1.7

0.1

.
3

.
1

1.38

0.2

2.5

0.2

.
0

M A R K I N G

E I A J
C O D E

.
0

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFELA10M7FA0G-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

GDT Bandwidth

(kHz)

Input/Output

Impedance

(ohm)

SFELA10M7JAXE-B0

10.700

30kHz

150

30kHz

500 max.

14.0 max.

35 min.

50 min.[within 0.15

sec.]

330

SFELA10M7HAXD-B0

10.700

30kHz

180

30kHz

530 max.

14.0 max.

33 min.

60 min.[within 0.15

sec.]

330

SFELA10M7HA0G-B0

10.700

30kHz

180

40kHz

520 max.

7.0 max.

40 min.

45 min.[within 0.5

sec.]

330

SFELA10M7GAXX-B0

10.700

30kHz

250

40kHz

670 max.

12.0 max.

25 min.

110 min.[within 0.2

sec.]

330

SFELA10M7GAXA-B0

10.700

30kHz

220

40kHz

610 max.

12.5 max.

30 min.

80 min.[within 0.15

sec.]

330

SFELA10M7GALP03-B0

10.700

30kHz

250

50kHz

650 max.

10.0 max.

30 min.

65 min.[within 0.25

sec.]

330

SFELA10M7GALM-B0

10.700

30kHz

230

50kHz

600 max.

9.0

2.0dB

30 min.

60 min.[within 0.25

sec.]

330

SFELA10M7GA0G-B0

10.700

30kHz

230

50kHz

600 max.

7.0 max.

40 min.

60 min.[within 0.5

sec.]

330

SFELA10M7FALL-B0

10.700

30kHz

280

50kHz

700 max.

7.0

2.0dB

25 min.

70 min.[within 0.25

sec.]

330

SFELA10M7FA0G-B0

10.700

30kHz

280

50kHz

650 max.

4.0

2.0dB

30 min.

85 min.[within 0.5

sec.]

330

Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFELA10M7JAXE-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

5.00

Frequency (MHz)

.
D

.
T

.

(

.
)

4.75

4.50

4.25

4.00

3.75

3.50

3.25

SFELA10M7HAXD-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

4.50

Frequency (MHz)

.
D

.
T

.

(

.
)

4.25

4.00

3.75

3.50

3.25

3.00

2.75

SFELA10M7HA0G-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.00

Frequency (MHz)

.
D

.
T

.

(

.
)

5.50

5.00

4.50

4.00

3.50

3.00

2.50

SFELA10M7GAXX-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

3.25

Frequency (MHz)

.
D

.
T

.

(

.
)

3.00

2.75

2.50

2.25

2.00

1.75

1.50

SFELA10M7GAXA-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

3.75

Frequency (MHz)

.
D

.
T

.

(

.
)

3.50

3.25

3.00

2.75

2.50

2.25

2.00

SFELA10M7GALP03-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

3.75

Frequency (MHz)

.
D

.
T

.

(

.
)

3.50

3.25

3.00

2.75

2.50

2.25

2.00

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

SFELA10M7GALM-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

4.00

Frequency (MHz)

.
D

.
T

.

(

.
)

3.75

3.50

3.25

3.00

2.75

2.50

2.25

SFELA10M7GA0G-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.00

Frequency (MHz)

.
D

.
T

.

(

.
)

5.50

5.00

4.50

4.00

3.50

3.00

2.50

SFELA10M7FALL-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

3.25

Frequency (MHz)

.
D

.
T

.

(

.
)

3.00

2.75

2.50

2.25

2.00

1.75

1.50

SFELA10M7FA0G-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

5.00

Frequency (MHz)

.
D

.
T

.

(

.
)

4.50

4.00

3.50

3.00

2.50

2.00

1.50

s Frequency Characteristics (Spurious)

SFELA10M7JAXE-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7HAXD-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7HA0G-B0

t
t
e

t
i
o

(
d

)

9.900

10.300

10.700

11.100

11.500

Frequency (MHz)

SFELA10M7GAXX-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

SFELA10M7GAXA-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7GALP03-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7GALM-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7GA0G-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7FALL-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFELA10M7FA0G-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

10.7MHz High Selectivity Type SFTLA Series

SFTLA10M7 series for FM-receivers are monolithic type

ceramic filters which use the thickness expander mode

of the piezoelectric ceramic.

s Features

1. It has an excellent shape factor, and it is

possible to obtain 1.5 times more excellent

selectivity than SFELA10M7 series (by detuning

+-300 or 400kHz).

2. Good performance of spurious suppression

3. Having the same terminal pitch as the SFELA10M7

series, it easily replaces that series.

4. By replacing two SFELA10M7 series filters with one

SFTLA10M7 filter, more compact sets can be made.

5. Well-suited for 1-chip ICs

M A R K I N G

(1)

(2)

(3)

10.0

1.0

.
0

2.5

0.2

0.5

0.1

0.65

0.1

.
3

.
1

0.4

0.1

2.5

0.2

.
0

1.4

0.1

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFTLA10M7HA00-B0

M A R K I N G

(1)

(2)

(3)

10.0

1.0

.
0

2.5

0.2

0.5

0.1

0.65

0.1

.
3

.
1

0.4

0.1

2.5

0.2

.
0

1.4

0.1

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFTLA10M7GA00-B0

M A R K I N G

(1)

(2)

(3)

10.0

1.0

.
0

2.5

0.2

0.5

0.1

0.65

0.1

.
3

.
1

0.4

0.1

2.5

0.2

.
0

1.4

0.1

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFTLA10M7FA00-B0

Part Number

Center

Frequency (fo)

(MHz)

3dB Bandwidth

(kHz)

Attenuation

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation

(dB)

Input/Output

Impedance

(ohm)

SFTLA10M7HA00-B0

10.700

30kHz

180

40kHz

510 max.

5.5

2.5dB

50 min.

330

SFTLA10M7GA00-B0

10.700

30kHz

230

40kHz

650 max.

6.0

2.0dB

50 min.

330

SFTLA10M7FA00-B0

10.700

30kHz

280

50kHz

700 max.

6.0

2.0dB

50 min.

330

Attenuation Bandwidth : at 40dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz]

Insertion Loss: at minimum loss point

Center frequency (fo) defined by the center of 3dB bandwidth.

(fn) means nominal center frequency.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

s Test Circuit

(1)

(2)

(3)

S.S.G

Rg + R

= R

= Input and Output Impedance

C = 10pF (Including stray capacitance and input
capacitance of RF voltmeter.)

Voltmeter

(1) : Input
(2) : Output
(3) :Ground

s Frequency Characteristics

SFTLA10M7HA00-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

8.00

Frequency (MHz)

.
D

.
T

.

(

.
)

7.50

7.00

6.50

6.00

5.50

5.00

4.50

SFTLA10M7GA00-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

7.00

Frequency (MHz)

.
D

.
T

.

(

.
)

6.50

6.00

5.50

5.00

4.50

4.00

3.50

SFTLA10M7FA00-B0

t
t
e

t
i
o

(
d

)

10.500

10.600

10.700

10.800

10.900

6.00

Frequency (MHz)

.
D

.
T

.

(

.
)

5.50

5.00

4.50

4.00

3.50

3.00

2.50

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics (Spurious)

SFTLA10M7HA00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFTLA10M7GA00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

SFTLA10M7FA00-B0

t
t
e

t
i
o

(
d

)

8.700

9.700

10.700

11.700

12.700

Frequency (MHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

CERAFIL

10.7MHz Related Data on Lead Type

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Temperature Characteristics

SFELA10M7GA00-B0

Temperature (°C)

Center frequency

Temperature (°C)

Insertion loss

Temperature (°C)

3dB Band width

r
i
a

t
i
o

(
k

)

r
i
a

t
i
o

(
d

)

r
i
a

t
i
o

(
k

)

SFELA10M7HA00-B0

Temperature (°C)

Center frequency

Temperature (°C)

Insertion loss

Temperature (°C)

3dB Band width

r
i
a

t
i
o

(
k

)

r
i
a

t
i
o

(
d

)

r
i
a

t
i
o

(
k

)

s Matching Conditions

·When using ceramic filters, it is most important to

match the input/output load to impedance 330 ohm

(SFELA10M7DF00-B0 is 470 ohm and

SFKLA10M7NL00-B0 is 600 ohm matching).

Waveform symmetry is damaged when reactance is added

to the input/output load.

·Two ceramic filters directly connected can be used

for high selelctivity. For reducing waveform

variation, it is recommended to input a buffer AMP

between ceramic filters.

·The SFELA10M7 and SFTLA10M7 series are of

input/output symmetric structure so that in theory

there is no input/output directionality. Actual

circuits may use different input/output loading

conditions (for example, mismatched impedance) or

capacitance load. In such cases, the waveform will

be a little changed by the direction of the

input/output of the ceramic filters.

s Loaded Resistance and Waveform (Rg+R1=330ohm)

SFELA10M7GA00-B0

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

=220

=330

=560

=1k

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

s Loaded Capacitance and Waveform (Rg+R1=R2=330ohm)

SFELA10M7GA00-B0

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

1.2
1.0
0.8

0.6

0.4

0.2

10.7 10.8 10.9

10.6

10.5

C=10pF

C=33pF

C=56pF

C=82pF

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

r
o

l
a

i
m

(

.
)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

4.5-6.5MHz Chip Type SFSKA Series

SMD ceramic filter SFSKA_CF is a small and thin SMD

filter sealed with a metal cap.

Recommended for LCD-TVs, and small and thin tuners.

s Features

1. High attenuation outside bandwidth

2. Small and thin pakage

3. Reflow-solderable

(1) : Input
(2) : Ground
(3) : Output

7.9

0.2

3.0

0.1

8.5

0.2

3.8

0.2

1.8

0.2

0.5

0.1

0.6

0.2

1.0

0.1

1.3

0.2

2.5

0.2 2.5

0.2

0.3

0.1

1.3

0.2

(1)

(2)

(3)

(in mm)

Part Number

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSKA4M50CF00-R1

4.500

60 min.

600 max.

6.0 max.

20 min.

[within 0 to fn]

15 min.

[within fn to 7.0MHz]

1000

Insertion Loss: at minimum loss point

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Land Pattern Dimensions

1.0

1.5

.
8

1.0

(in mm)

s Test Circuit

RF
Voltmeter

S.S.G.

(1) (2) (3)

R1+Rg=R2=1000

5%, Rg=50

C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1:S.S.G. Output voltage

(1) Input
(2) Ground
(3) Output

s Frequency Characteristics

3.5

3.9

3.7

4.1

4.5

4.9

5.3

4.3

t
t
e

t
i
o

(
d

)

4.7

Frequency (MHz)

5.1

5.5

s Frequency Characteristics (Spurious)

0.0

2.0

4.0

t
t
e

t
i
o

(
d

)

6.0

Frequency (MHz)

8.0

10.0

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

4.5-6.5MHz Standard Lead Type SFSRA Series

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter SFSRA series contains no

lead (Pb).

This series also features thickness shear mode same

as SFSRH series (current type), which provides very

low spurious response within video signal band.

s Features

1. Excellent spurious suppression characteristics

within video signal band.

2. Available 4 pass bandwidth variation to meet

various requests.

3. Low profile (H=7.0mm max.)

4. Lead dimension: Improved mounting reliability

(cut & clinch) due to round terminal.

10.0 max.

7.0

(Ref.)

2.5

0.2

2.5

0.2

.
0

.
5

.
4

.
1

.
9

(
R

f
.
)

.
0

3--0.8

(3)

(2)

(1)

(in mm)

(1) : Input
(2) : Ground
(3) : Output

Part Number

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSRA4M50CF00-B0

4.500

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.0MHz]

1000

SFSRA4M50DF00-B0

4.500

70 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.0MHz]

1000

SFSRA4M50EF00-B0

4.500

125 min.

850 max.

6.0 max.

25 min.

[within 0 to fn]

18 min.

[within fn to 7.0MHz]

1000

SFSRA5M50BF00-B0

5.500

50 min.

400 max.

8.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.5MHz]

600

SFSRA5M50CF00-B0

5.500

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to7.5MHz]

600

SFSRA5M50DF00-B0

5.500

80 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.5MHz]

600

SFSRA5M74BF00-B0

5.742

50 min.

400 max.

8.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.5MHz]

600

SFSRA5M74CF00-B0

5.742

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.5MHz]

600

SFSRA6M00CF00-B0

6.000

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 8.0MHz]

470

SFSRA6M00DF00-B0

6.000

80 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 8.0MHz]

470

SFSRA6M50CF00-B0

6.500

70 min.

650 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 8.5MHz]

470

SFSRA6M50DF00-B0

6.500

80 min.

800 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 8.5MHz]

470

Insertion Loss: at minimum loss point

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Test Circuit

RF
Voltmeter

S.S.G.

Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)

s Frequency Characteristics

SFSRA4M50CF00-B0

3.5

3.7

3.9

4.1

4.3

4.5

Frequency (MHz)

4.7

4.9

5.1

5.3

5.5

t
t
e

t
i
o

(
d

)

SFSRA4M50DF00-B0

3.5

3.7

3.9

4.1

4.3

4.5

Frequency (MHz)

4.7

4.9

5.1

5.3

5.5

t
t
e

t
i
o

(
d

)

SFSRA4M50EF00-B0

3.5

3.7

3.9

4.3

4.5

Frequency (MHz)

4.7

4.9

5.1

5.3

5.5

t
t
e

t
i
o

(
d

)

SFSRA5M50BF00-B0

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

t
t
e

t
i
o

(
d

)

SFSRA5M50CF00-B0

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

t
t
e

t
i
o

(
d

)

SFSRA5M50DF00-B0

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

t
t
e

t
i
o

(
d

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

SFSRA5M74BF00-B0

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

6.7

t
t
e

t
i
o

(
d

)

SFSRA5M74CF00-B0

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

6.7

t
t
e

t
i
o

(
d

)

SFSRA6M00CF00-B0

5.0

5.2

5.4

5.6

5.8

6.0

6.2

6.4

6.6

6.8

7.0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

SFSRA6M00DF00-B0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

5.0

5.2

5.4

5.6

5.8

6.0

6.2

6.4

6.6

6.8

7.0

SFSRA6M50CF00-B0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

5.5

5.7

5.9

6.1

6.3

6.5

6.7

6.9

7.1

7.3

7.5

SFSRA6M50DF00-B0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

5.5

5.7

5.9

6.1

6.3

6.5

6.7

6.9

7.1

7.3

7.5

s Frequency Characteristics (Spurious)

SFSRA4M50CF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA4M50DF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

SFSRA4M50EF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA5M50BF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA5M50CF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA5M50DF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA5M74BF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA5M74CF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA6M00CF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA6M00DF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

SFSRA6M50CF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

SFSRA6M50DF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

Frequency (MHz)

6.0

7.0

8.0

9.0

10.0

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

3.5-6.5MHz Low Profile Type SFSRL Series

SFSRL series are the Low-profile type of standard

SFSRA series.

s Features

1. Installed height is 6.0mm, making it well suited

for compact, thin sets.

2. Electrical char. and performance are the same as

those of SFSRA series.

3. 2 types, narrow and middle bandwidth, are prepared.

.
0

0.5

0.1

1.1

0.1

10.0 max.

.
0

M A R K I N G

E I A J

C O D E

.
0

(3) (2) (1)

.
3

.
1

2.5

0.2

2.5

(in mm)

(1) : Input
(2) : Ground
(3) : Output

Part Number

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSRL4M50CF00-B0

4.500

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.0MHz]

1000

SFSRL4M50DF00-B0

4.500

70 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 5.7MHz]

1000

SFSRL5M50CF00-B0

5.500

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.0MHz]

600

SFSRL5M50DF00-B0

5.500

80 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.0MHz]

600

SFSRL6M00CF00-B0

6.000

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.5MHz]

470

SFSRL6M00DF00-B0

6.000

80 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.5MHz]

470

SFSRL6M50CF00-B0

6.500

70 min.

650 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 8.5MHz]

470

SFSRL6M50DF00-B0

6.500

80 min.

800 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 8.0MHz]

470

Insertion Loss: at minimum loss point

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

RF
Voltmeter

S.S.G.

Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics

SFSRL4M50CF00-B0

3.7

3.5

3.9

4.1

4.3

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL4M50DF00-B0

3.5

3.7

3.9

4.1

4.3

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL5M50CF00-B0

4.7

4.5

4.9

5.1

5.3

5.5

5.7

5.9

6.1

6.3

6.5

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL5M50DF00-B0

t
t
e

t
i
o

(
d

)

4.5

4.7

4.9

5.1

5.3

5.5

Frequency (MHz)

5.7

5.9

6.1

6.3

6.5

SFSRL6M00CF00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.0

5.6

5.8

6.2

6.6

5.2

5.4

6.0

6.4

6.8

7.0

SFSRL6M00DF00-B0

5.2

5.0

5.4

5.6

5.8

6.0

6.2

6.4

6.6

6.8

7.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL6M50CF00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.5

6.1

6.3

6.7

7.1

5.7

5.9

6.5

6.9

7.3

7.5

SFSRL6M50DF00-B0

5.7

5.5

5.9

6.1

6.3

6.5

6.7

6.9

7.1

7.3

7.5

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

SFSRL4M50CF00-B0

1.0

0.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL4M50DF00-B0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL5M50CF00-B0

1.0

0.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL5M50DF00-B0

t
t
e

t
i
o

(
d

)

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0 10.0

Frequency (MHz)

SFSRL6M00CF00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

SFSRL6M00DF00-B0

1.0

0.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL6M50CF00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

SFSRL6M50DF00-B0

1.0

0.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

3.5-6.5MHz for Chroma Signal SFSRA/L Series

Chroma signals frequency conversion process is

involved in VCRs video signal processing circuit.

These SFSRA/SFSRH/SFSRL series are suitable for B.P.F.

s Features

1. Frequency adjustment free.

2. Responsible for VHS. 8mm VCR system.

10.0 max.

7.0

(Ref.)

2.5

0.2

2.5

0.2

.
0

.
5

.
4

.
1

.
9

(
R

f
.
)

.
0

3--0.8

(3)

(2)

(1)

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFSRA Series

.
0

0.5

0.1

1.1

0.1

10.0 max.

.
0

M A R K I N G

E I A J

C O D E

.
0

(3) (2) (1)

.
3

.
1

2.5

0.2

2.5

(in mm)

(1) : Input
(2) : Ground
(3) : Output

SFSRL Series

Part Number

Nominal Center

Frequency (fn)

(MHz)

3dB

Bandwidth

(kHz)

20dB

Bandwidth

(kHz)

Insertion

Loss

(dB)

Spurious

Attenuation(1)

(dB)

Spurious

Attenuation(2)

(dB)

Input/Output

Impedance

(ohm)

SFSRA4M43CF00-B0

4.430

60 min.

600 max.

6.0 max.

30 min.

[within 0 to fn]

20 min.

[within fn to 7.0MHz]

1000

SFSRL4M32DF00-B0

4.320

70 min.

750 max.

6.0 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 5.5MHz]

1000

SFSRL5M17DF00-B0

5.170

70 min.

750 max.

7.5 max.

30 min.

[within 0 to fn]

15 min.

[within fn to 7.0MHz]

600

Insertion Loss: at minimum loss point

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

RF
Voltmeter

S.S.G.

Rg+R1=R2=Input and Output Impedance
C=10pF (Including stray capacitance and
input capacitance of RF voltmeter)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics

SFSRA4M43CF00-B0

4.7

4.5

4.3

Frequency (MHz)

t
t
e

t
i
o

(
d

)

4.1

5.3

5.5

5.1

4.9

3.9

3.5

3.7

SFSRL4M32DF00-B0

3.3

4.7

4.5

4.3

Frequency (MHz)

t
t
e

t
i
o

(
d

)

4.1

5.3

5.1

4.9

3.9

3.5

3.7

SFSRL5M17DF00-B0

4.4

4.2

4.6

4.8

5.0

5.2

5.4

5.6

5.8

6.0

6.2

Frequency (MHz)

t
t
e

t
i
o

(
d

)

s Frequency Characteristics (Spurious)

SFSRA4M43CF00-B0

0.0

7.0

6.0

5.0

4.0

10.0

9.0

8.0

3.0

1.0

2.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL4M32DF00-B0

0.0

7.0

6.0

5.0

4.0

10.0

9.0

8.0

3.0

1.0

2.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

SFSRL5M17DF00-B0

1.0

0.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz Chip Type PFWCC Series

PFWCC series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability, and adjustment-free operation.

Additionally its easy matching with IC helps create an

easy circuit design.

This is the most recommendable for portable radio with

small package. Especially, reflowable with SMD package.

s Features

1. Center frequency range between 450 and 470 kHz

are available standard tolerance of +-2 kHz.

2. For frequency synthesizers, center frequencies

of 450, 459 and 468 kHz are available standard

tolerance of +-1 kHz.

5.7

0.3

4.0

0.2

1.2

0.2

1.2

0.2

.
0

.
3

.
0

.
2

.
0

.
2

.
5

.
2

OUT

GND

Input Mark

(2)

(3)

(1)

(4)

.
5

.
2

(in mm)

Part Number

Center

Frequency (fo)

(kHz)

3dB Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

Input/Output

Impedance

(ohm)

Element

PFWCC450KS2A-R0

450

2.0kHz

5.5

1.5kHz

17 min.[fo+9kHz]

17 min.[fo-9kHz]

6.0 max.

3000

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 3dB bandwidth.

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Land Pattern Dimensions

.
0

.
5

4.0

1.2

6.0

(in:mm)

The solder resist should be printed except for the land
pattern on the P.C.B..

The material of P.C.B. is the epoxy resin of glass fabric
base (t=0.8mm)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Recommended IFT

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

180pF

7mm IFT

(1)--(2)

(2)--(3)

(4)--(6)

85T

67T

23T

(Bottom view)

180pF

5mm IFT

(1)--(2)

(2)--(3)

(4)--(6)

84T

98T

33T

· Maching of CERAFIL

PFWLA series with IFT is decided by the IFT secondary side

impedance, |Z2|. Set the |Z2| at about 4.2k

s Test Circuit (CERAFILr Only)

(1)

(2)

(4)

(3)

S.S.G.
(Rg=50

)

RF
Voltmeter

s Test Circuit (CERAFILr with IFT)

S.S.G.
(Rg=50

)

7pF

300k

RF
Voltmeter

IFT

(1)

(4)

(1)

(3)

(2)

(3)

(4)

(6)

s Frequency Characteristics

IFT+PFWCC450KS2A-R0

Frequency (kHz)

t
t
e

t
i
o

(
d

)

430

440

450

460

470

s Frequency Characteristics (Spurious)

IFT+PFWCC450KS2A-R0

0.000

1.000

2.000

3.000

4.000

Frequency (kHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz Chip Type SFPCA Series

SFPCA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability and adjustment-free operation.

Additionally its easy matching with IC helps create an

easy circuit design.

s Features

1. The filters are mountable by automatic placers

and can be reflow soldered and withstand

washing.

2. The filters are wide bandwidth and high

selectivity. So they are suitable for car radio

and multi band radio.

.
5

.
3

.
0

3.0

0.3

.
4

2.0

0.3

1.5

0.3

7.0

0.3

0.9

0.1

MARKING

EIAJ
CODE

2.0

0.3

(1) (2) (3)

1.5

0.3

1.6

0.3

Connection
(1) : Input
(2) : Ground
(3) : Output

(in mm)

Part Number

Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

Input/Output

Impedance

(ohm)

Element

SFPCA450KH1A-R1

450

1.0kHz

3.0 min.

40 min.[fn+9kHz]

40 min.[fn-9kHz]

6.0 max.

2000

SFPCA450KG1A-R1

450

1.0kHz

4.5 min.

40 min.[fn+10kHz]

40 min.[fn-10kHz]

6.0 max.

1500

SFPCA450KF4A-R1

450

1.5kHz

6.0 min.

40 min.[fn+12.5kHz]

40 min.[fn-12.5kHz]

6.0 max.

1500

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Land Pattern Dimensions

(in mm)

2.0

2.475

6.95

.
6

.
5

.
4

.
8

.
9

0.925

2.0

1.1

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Recommended IFT

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

180pF

SFPCA

(1)--(2)

(2)--(3)

(4)--(6)

60T

125T

28T

(Bottom view)

· Matching of CERAFIL

SFPCA series with IFT is decided by the Qu of IFT

and IFT secondary side impedance, |Z2|. Set the Qu at about 40 because
a Qu value which is too high (e.g.,90) may produce ripple in the waveform.
It is recommended to match the impedance of |Z2| with that of the
CERAFIL

s Test Circuit

Rg+R1=R2=Input/Output Impedance

S.S.G.

0dBm

(1)

(2)

(3)

RF Voltmeter

Connection

(1):Input

(2):Ground

(3):Output

s Frequency Characteristics

SFPCA450KH1A-R1

100

t
t
e

t
i
o

(
d

)

200

400

.
D

.
T

.

(

.
)

425

450

475

Frequency (kHz)

360

280

320

240

160

120

SFPCA450KG1A-R1

100

t
t
e

t
i
o

(
d

)

200

400

.
D

.
T

.

(

.
)

425

450

475

Frequency (kHz)

360

320

280

240

160

120

SFPCA450KF4A-R1

400

100

t
t
e

t
i
o

(
d

)

.
D

.
T

.

(

.
)

425

450

475

Frequency (kHz)

240

280

320

360

120

160

200

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz SFULA/SFZLA Series

SFULA/SFZLA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability, and adjustment-free operation.

Additionally its easy matching with IC helps create

an easy circuit design.

s Features

1. Center frequency range between 450 to 470 kHz

are available standard tolerance of +-2 kHz.

2. For frequency synthesizers, center frequencies

of 450, 459 and 468 kHz are available standard

tolerance of +-1 kHz.

MARKING

.
0

.
3

(1)

(2)

(3)

7.0

0.3

3
.
5

0
.
3

.
5

.
7

.
5

1.1

0.1

0.8

0.1

2.5

0.2 2.5

0.2

0.25

0.1

EIAJ
CODE

Connection
(1) : Input
(2) : Ground
(3) : Output

(in mm)

.
0

-
0

.
5

SFULA Series

MARKING

.
0

.
3

7.0

0.3

.
0

.
5

3
.
5

0
.
5

1.1

0.1

0.8

0.1

2.5

0.2 2.5

0.2

0.25

0.1

EIAJ

CODE

(1)

(2)

(3)

(4)

(5)

(6)

1
.
7
5

0
.
5

Connection
(1) : Input
(2)(5) : Ground
(3)(4) : Direct connection
(6) : Output

(in mm)

1
.
0

-
0
.
5

SFZLA Series

Part Number

Center

Frequency (fo)

(kHz)

3dB Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

Input/Output

Impedance

(ohm)

Element

SFULA455KU2A-B0

455

2.0kHz

10.0

3.0kHz

4 min.[fo+10kHz]

6 min.[fo-10kHz]

5.0 max.

3000

SFULA455KU2B-B0

462

2.0kHz

10.0

3.0kHz

4 min.[fo+10kHz]

6 min.[fo-10kHz]

5.0 max.

3000

SFZLA455KN2A-B0

455.5

2.0kHz

4.0

1.0kHz

23 min.[fo+9kHz]

23 min.[fo-9kHz]

7.0 max.

3000

SFZLA455KS2A-B0

456

2.0kHz

5.5

1.0kHz

18 min.[fo+9kHz]

18 min.[fo-9kHz]

7.0 max.

3000

SFZLA455KT2A-B0

456

2.0kHz

7.0

1.0kHz

16 min.[fo+9kHz]

16 min.[fo-9kHz]

6.0 max.

3000

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Frequency Characteristics (CERAFILr with IFT)

Part Number

Input Level (at 0.6mV output)

(dB)

Selectivity

6dB Band Width

(kHz)

+9kHz off (dB)

IFT+SFULA455KU2B-B0

IFT+SFZLA455KN2A-B0

IFT+SFZLA455KS2A-B0

IFT+SFZLA455KT2A-B0

6.5

5.0

7.0

8.5

-9kHz off (dB)

Typ. value

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Recommended IFT (7x7)

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

105

180pF

SFULA

(1)--(2)

(2)--(3)

(4)--(6)

70T

115T

(Bottom view)

180pF

SFZLA

(1)--(2)

(2)--(3)

(4)--(6)

68T

84T

14T

· Maching of CERAFIL

SFULA/SFZLA series with IFT is decided by the IFT secondary side

impedance, |Z2|. The design target values of |Z2| are :
For SFULA

L : 300

For SFZLA

L : 1k

s Test Circuit (CERAFILr Only)

SFULA Series

(1)

(3)

(2)

S.S.G.
(Rg=50

)

RF
Voltmeter

SFZLA Series

S.S.G.
(Rg=50

)

RF
Voltmeter

(1)

(2)

(3)

(6)

(5)

(4)

s Test Circuit (CERAFILr with IFT)

SFULA Series

S.S.G.
(Rg=50

)

7pF

300k

RF
Voltmeter

IFT

(1)

(2)

(4)

(6)

(3)

(1)

SFZLA Series

S.S.G.
(Rg=50

)

7pF

300k

RF
Voltmeter

IFT

(1)

(2)

(3)

(6)

(5)

(4)

(2)

(3)

(4)

(6)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Frequency Characteristics

IFT+SFULA455KU2B-B0

t
t
e

t
i
o

(
d

)

435

445

455

465

475

Frequency (kHz)

IFT+SFZLA455KN2A-B0

t
t
e

t
i
o

(
d

)

435

445

455

465

475

Frequency (kHz)

IFT+SFZLA455KS2A-B0

t
t
e

t
i
o

(
d

)

435

445

455

465

475

Frequency (kHz)

IFT+SFZLA455KT2A-B0

t
t
e

t
i
o

(
d

)

435

445

455

465

475

Frequency (kHz)

s Frequency Characteristics (Spurious)

IFT+SFULA455KU2B-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

IFT+SFZLA Series

Frequency (MHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz PFSLA/PFWLA Series

PFSLA/PFWLA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability, and adjustment-free operation.

Additionally its easy matching with IC helps create

an easy circuit design.

This is the most recommendable for portable radios

with small package.

s Features

1. Center frequency range between 450 to 470 kHz

are available standard tolerance of +-2 kHz.

2. For frequency synthesizers, center frequencies

of 450, 459 and 468 kHz are available standard

tolerance of +-1 kHz.

1.4

0.1

6.0

1.0

1.4

0.1

0.5

0.1

2.5

0.2 2.5

0.2

.
3

.
1

.
0

(3)

(1)

(2)

(1) Input
(2) Ground
(3) Output

: EIAJ Monthly Code

Marking :

(in mm)

PFSLA Series

(3)

(2)

(1)

.
3

.
1

.
0

2.5

0.2 2.5

0.2

Marking :

(1) Input
(2) Ground
(3) Output

: Vender's Code
: EIAJ monthly Code

1.4

0.1

1.4

0.1

0.5

0.1

.
0

.
2

6.0

1.0

(in mm)

PFWLA Series

Part Number

Center

Frequency (fo)

(kHz)

3dB Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

Input/Output

Impedance

(ohm)

Element

PFSLA455KP2A-B0

455

2.0kHz

4.5

1.5kHz

8 min.[fo+9kHz]

8 min.[fo-9kHz]

5.0 max.

3000

PFWLA450KP2A-B0

450

2.0kHz

4.5

1.5kHz

19 min.[fo+9kHz]

19 min.[fo-9kHz]

7.0 max.

3000

PFWLA450KS2A-B0

450

2.0kHz

5.5

1.5kHz

17 min.[fo+9kHz]

17 min.[fo-9kHz]

6.0 max.

3000

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 3dB bandwidth.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Recommended IFT

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

180pF

7mm IFT

(1)--(2)

(2)--(3)

(4)--(6)

85T

67T

23T

(Bottom view)

180pF

5mm IFT

(1)--(2)

(2)--(3)

(4)--(6)

84T

98T

33T

· Maching of CERAFIL

PFWLA series with IFT is decided by the IFT secondary side

impedance, |Z2|. Set the |Z2| at about 4.2k

s Test Circuit (CERAFILr Only)

PFSLA/PFWLA Series

S.S.G.
(Rg=50

)

RF
Voltmeter

(1)

(3)

(2)

s Test Circuit (CERAFILr with IFT)

PFSLA/PFWLA Series

S.S.G.
(Rg=50

)

7pF

RF
Voltmeter

IFT

(1)

(3)

(2)

(3)

(4)

(6)

300k

s Frequency Characteristics

IFT+PFSLA455KP2A-B0

435

445

455

465

475

Frequency (kHz)

t
t
e

t
i
o

(
d

)

IFT+PFWLA450KS2A-B0

Frequency (kHz)

t
t
e

t
i
o

(
d

)

430

440

450

460

470

s Frequency Characteristics (Spurious)

IFT+PFSLA455KP2A-B0

0.000

1.000

2.000

3.000

4.000

Frequency (kHz)

t
t
e

t
i
o

(
d

)

IFT+PFWLA450KS2A-B0

0.000

1.000

2.000

3.000

4.000

Frequency (kHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz SFPLA/CFWLA Series

s Features

SFPLA/CFWLA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability, high attenuation, and adjustment-free

operation. Additionally its easy matching with IC

helps create an easy circuit design.

This is the most recommendable for car-stereo and

all band radio with high attenuation.

3
.
0

0
.
3

.
0

.
3

.
2

.
3

0.8

0.1

0.6

0.1

1.2

0.5

8.0

0.3

MARKING

EIAJ
CODE

3.3

0.5

2.7

0.3

(1)

(2)

(3)

.
3

.
1

1
.
5
m

a
x
.

0.15

0.05

Connection
(1) : Input
(2) : Ground
(3) : Output

(in mm)

SFPLA Series

.
3

0.15

.
5

2.3

0.5

2.0

0.3

2.9

0.3

11.0

0.5

MARKING

EIAJ
CODE

1.2

0.5

(1)

(2)

(4) (3)

(5)

.
3

.
5

.
0

.
5

3
.
5

0
.
5

0.6

0.1

0.8

0.1

.
5

2.6

0.3

Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output

(in mm)

2.9

2.9--

--0.3

0.3

2.9

0.3

CFWLA Series

Part Number

Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

Input/Output

Impedance

(ohm)

Element

SFPLA450KJ1A-B0

450

1.0kHz

2.0 min.

40 min.[fn+7.5kHz]

40 min.[fn-7.5kHz]

6.0 max.

2000

SFPLA450KH1A-B0

450

1.0kHz

3.0 min.

40 min.[fn+9kHz]

40 min.[fn-9kHz]

6.0 max.

2000

CFWLA450KJFA-B0

450 (fn)

2.0 min.

50 min.[fn+7.5kHz]

50 min.[fn-7.5kHz]

7.0 max.

2000

CFWLA450KHFA-B0

450 (fn)

3.0 min.

50 min.[fn+9kHz]

50 min.[fn-9kHz]

6.0 max.

2000

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Recommended IFT (7x7)

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

180pF

SFPLA/CFULA/CFWLA

(1)--(2)

(2)--(3)

(4)--(6)

60T

125T

28T

(Bottom view)

· Matching of CERAFIL

SFPLA/CFULA/CFWLA series with IFT is decided

by the Qu of IFT and IFT secondary side impedance, |Z2|. Set the Qu at
about 40 because a Qu value which is too high (e.g.,90) may produce
ripple in the waveform. It is recommended to match the impedance of |Z2|
with that of the CERAFIL

s Test Circuit

Input

Output

SSG

Ground

Voltmeter

Rg+R1 =R2 : Input/Output Impedance

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

IFT+SFPLA450KH1A-B0

t
t
e

t
i
o

(
d

)

430

440

450

460

470

Frequency (kHz)

IFT+CFWLA450KHFA-B0

430

440

450

460

470

Frequency (kHz)

t
t
e

t
i
o

(
d

)

s Frequency Characteristics (Spurious)

IFT+SFPLA450KH1A-B0

Frequency (kHz)

t
t
e

t
i
o

(
d

)

IFT+CFWLA450KHFA-B0

Frequency (kHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz for AM Stereo Wide Bandwidth Type SFPLA/CFWLA/CFULA Series

s Features

SFPLA/CFWLA/CFULA series for AM use is one of the most

recommendable intermediate filters, having such

distinctive features as high selectivity, high

stability, high attenuation, and adjustment-free

operation. Additionally its easy matching with IC

helps create an easy circuit design.

Especially, CFULA/CFWLA_Y series is the frequency

fidelity in the high sound area of an AM stereo will

be improved with wide band, flat group delay time

characteristics.

3
.
0

0
.
3

.
0

.
3

.
2

.
3

0.8

0.1

0.6

0.1

1.2

0.5

8.0

0.3

MARKING

EIAJ
CODE

3.3

0.5

2.7

0.3

(1)

(2)

(3)

.
3

.
1

1
.
5
m

a
x
.

0.15

0.05

Connection
(1) : Input
(2) : Ground
(3) : Output

(in mm)

SFPLA Series

.
3

0.15

.
5

2.3

0.5

2.0

0.3

2.9

0.3

11.0

0.5

MARKING

EIAJ
CODE

1.2

0.5

(1)

(2)

(4) (3)

(5)

.
3

.
5

.
0

.
5

3
.
5

0
.
5

0.6

0.1

0.8

0.1

.
5

2.6

0.3

Connection
(1) : Input
(2)(3)(4) : Ground
(5) : Output

(in mm)

2.9

2.9--

--0.3

0.3

2.9

0.3

CFWLA Series

.
0

.
3

.
0

.
3

.
2

.
3

0.8

0.1

0.6

0.1

1.2

0.5

8.0

0.3

MARKING

EIAJ
CODE

3.3

0.5

2.7

0.3

(1)

(2)

(3)

.
3

.
1

.
5

0.15

0.05

Connection
(1) : Input
(2) : Ground
(3) : Output
in mm

CFULA Series

Part Number

Center

Frequency (fo)

(kHz)

6dB

Bandwidth

(kHz)

Selectivity (+)

(dB)

Selectivity (-)

(dB)

Insertion Loss

(dB)

GDT 20

sec.

Bandwidth

(kHz)

Input/Output

Impedance

(ohm)

Element

SFPLA450KG1A-B0

450

1.0kHz

4.5 min.

30 min.[fn+9kHz]

30 min.[fn-9kHz]

6.0 max.

2000

SFPLA450KF1A-B0

450

1.0kHz

6.0 min.

40 min.[fn+12.5kHz] 40 min.[fn-12.5kHz]

6.0 max.

2000

SFPLA450KE1A-B0

450

1.0kHz

7.5 min.

40 min.[fn+15kHz]

40 min.[fn-15kHz]

6.0 max.

1500

SFPLA450KD1A-B0

450

1.0kHz

10.0 min.

40 min.[fn+20kHz]

40 min.[fn-20kHz]

4.0 max.

1500

CFWLA450KGFA-B0

450 (fn)

4.5 min.

50 min.[fn+10kHz]

50 min.[fn-10kHz]

6.0 max.

2000

CFWLA450KFFA-B0

450 (fn)

6.0 min.

50 min.[fn+12.5kHz] 50 min.[fn-12.5kHz]

6.0 max.

2000

CFWLA450KEFA-B0

450 (fn)

7.5 min.

50 min.[fn+15kHz]

50 min.[fn-15kHz]

6.0 max.

1500

CFWLA450KDFA-B0

450 (fn)

10.0 min.

50 min.[fn+20kHz]

50 min.[fn-20kHz]

4.0 max.

1500

CFWLA450KG1Y-B0

450

1.0kHz

4.5 min.

50 min.[fn+15kHz]

50 min.[fn-15kHz]

11.0 max.

4.0

2000

CFULA450KG1Y-B0

450

1.0kHz

4.5 min.

40 min.[fn+15kHz]

40 min.[fn-15kHz]

10.0 max.

4.5

2000

CFWLA450KF1Y-B0

450

1.0kHz

6.0 min.

50 min.[fn+17.5kHz] 50 min.[fn-17.5kHz]

10.0 max.

5.0

2000

CFULA450KF1Y-B0

450

1.0kHz

6.0 min.

40 min.[fn+17.5kHz] 40 min.[fn-17.5kHz]

9.0 max.

6.0

2000

CFWLA450KD1Y-B0

450

1.0kHz

10.0 min.

50 min.[fn+25kHz]

50 min.[fn-25kHz]

8.0 max.

8.0

1500

CFULA450KD1Y-B0

450

1.0kHz

10.0 min.

40 min.[fn+25kHz]

40 min.[fn-25kHz]

7.0 max.

9.0

1500

Insertion Loss: at minimum loss point

Center frequency (fo) is defined by the center of 6dB bandwidth.

(fn) means nominal center frequency (450kHz).

For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Recommended IFT (7x7)

(1)

(2)

S(3)

(4)S

(6)

Type

Item

Winding Specification

No load Qu

Tuning Capacitance

180pF

SFPLA/CFULA/CFWLA

(1)--(2)

(2)--(3)

(4)--(6)

60T

125T

28T

(Bottom view)

· Matching of CERAFIL

SFPLA/CFULA/CFWLA series with IFT is decided

s Test Circuit

Input

Output

SSG

Ground

Voltmeter

Rg+R1 =R2 : Input/Output Impedance

s Frequency Characteristics

IFT+SFPLA450KF1A-B0

t
t
e

t
i
o

(
d

)

430

440

450

460

470

Frequency (kHz)

IFT+CFWLA450KFFA-B0

430

440

450

460

470

Frequency (kHz)

t
t
e

t
i
o

(
d

)

IFT+CFULA450KF1Y-B0

430

440

450

460

470

200

100

r
o

l
a

i
m

(

.
)

Frequency (kHz)

t
t
e

t
i
o

(
d

)

IFT+CFWLA450KF1Y-B0

430

440

450

460

470

200

100

r
o

l
a

i
m

(

.
)

Frequency (kHz)

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

CERAFIL

455kHz for Search-stop Signal Detection

BFULA series are narrow bandwidth filters. This filter

is used in the application which detects the carrier

peak with a narrow bandwidth amplifier, or an electronic

tuner as a stop signal detector.

s Features

Most suitable for IC Station Detectors (SD).

.
2

.
0

5.0

0.2

(in mm)

MARKING

EIAJ

CODE

.
5

.
0

.
3

.
5

.
3

.
5

.
1

.
0

.
7

.
5

0.8

0.1

1.1

0.1

7.0

0.3

No directivity

Part Number

Resonant Frequency (Fr)

(kHz)

Delta F (Fa-Fr)

(kHz)

Resonant Resistance

(ohm)

Capacitance

(pF)

BFULA450KC-B0

450

1.0kHz

14.0

2.0kHz

20 max.

360

20%

BFULA450KC004-B0

450

0.8kHz

9.0

2.0kHz

30 max.

360

20%

BFULA450KK003-B0

450

1.0kHz

27.5

4.5kHz

30 max.

550

20%

fa-fr means difference between the anti-resonant frequency and the resonant frequency.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Impedance Characteristics

BFULA450KC004-B0

445

450

455

460

500k

100k

50k

10k

500

100

I
m

(
o

)

Frequency (kHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

CERAFIL

455kHz SF/PF Series Temperature Characteristics

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s SFZLA455KS2A-B0

-20

-1

-20

-1

-20

Temperature (

)

Temperature (

)

Temperature (

)

e
n
t
e
r

F

r
e
q
u
e
n
c
y

(
k

)

3
d
B

a
n
d

W

i
d
t
h

(
k

)

I
n
s
e
r
t
i
o
n

L
o
s

(
d

)

s SFPLA450KH1A-B0

-20

-1

-20

-1

-20

e
n
t
e
r

F

r
e
q
u
e
n
c
y

(
k

)

3
d
B

a
n
d

W

i
d
t
h

(
k

)

I
n
s
e
r
t
i
o
n

L
o
s

(
d

)

Temperature (

)

Temperature (

)

Temperature (

)

s PFWLA450KS2A-B0

-20

-1

-20

-1

-20

-1

e
n
t
e
r

F

r
e
q
u
e
n
c
y

(
k

)

3
d
B

a
n
d

W

i
d
t
h

(
k

)

I
n
s
e
r
t
i
o
n

L
o
s

(
d

)

Temperature (

)

Temperature (

)

Temperature (

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

CERAFIL

455kHz SF/PF/BF Series Application Circuit

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Car Radio

SFPLA450KH1A-B0/BFULA450KC004-B0

BFULA450KC004-B0

100k

10k

Vtune

Vco(

8v)

Station Det Out

430P

CF2

.
0

.
7

.
5

.
3

ANT

.
3

.
0

0.047

.
0

CF1

CF1: PFWLA450KS1A-B0

SFZLA450KS1A-B0
SFPLA450KH1A-B0

0.47

2.7k

.
0

0
.
0
4
7

100

.
0

AF Out

LA1135(SANYO)

R
C

: F
: H

Unit

PFSLA455KP2A-B0/PFWLA450KS2A-B0

PC1216V2

(NEC)

0.01

Det.
Output

Vcc
(+13V)

100

4.7

Ant
Input

.
0

.
3

4
.
7

.
0

100p

120

PFSLA455KP2A-B0

.
7

PFWLA450KS2A-B0

R
C

: F
: H

Unit

s Portable Radio

SFULA455KU2B-B0

RIPPLE
FILTER

REGULATOR

TUNING
METER

VOL

CXA1019M (SONY)

FM IF
AMP
DETECTOR

AF
PRE/POWER
AMP

AM IF
AMP
DETECTOR

FM
FRONT
END

AM
FRONT
END

FM
BPF

20 16

AGC
AMP

FM PF

FM OSC

METER

AM IF
IN

Vcc

AF IN

VOL

AM OSC

AM ANT

DEP
OUT

FM/AM
BAND SELECT

REG
OUT

FM DISCRI

FM IF
IN

FM CERAFIL®

(SFELA10M7FA00-B0)

CERAMIC DISCRIMINATOR

(CDALA10M7CA001-B0)

IF
OUT

AM CERAFIL

(SFULA455KU2B-B0)

R
C

: F
: H

Unit

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

CERAFIL

455kHz SF/PF/BF Series Application Circuit

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Portable Radio

SFULA455KU2B-B0

IS2236

CSBLA456
KE2ZF16-B0

CDALA10
M7GA16-B0

SFULA455
KU2B-B0

SFELA10
M7FA00-B0

TA8122AN (TOSHIBA)

100k

15p

LPF1

LPF2

VCO

+ -
+ -

FM
PF

AM
PF

FM
OSC

AM
OSC

DEF
OUT

MPX
IN

OUT
L

OUT
R

QUAD

ST
LED

TUN
LED

FM
IF IN

AM
IF IN

AM
AGC

FM
RF IN

AM
MIX

FM
MIX

GND2

Vcc2

GND1

OUT

Vcc1

0.022

.
1

4.7

.
0

0.033

.
0

.
1

.
0

Vcc

(3V)

DECODER

Phase

COM

Phase

COM

VCO

Freq

Divider

HYS

LED

TUN

LED

DET

PRE

DET

AGC

MIX

OSC

AM/FM

MONO SW

BPF

R
C

: F
: H

Unit

s In Tr Circuit

BFULA450KK003-B0

RF
Volt meter

BFULA
450KK003-B0

S.S.G.

(10mV)

0.01

+6V

R
C

: F
: H

Unit

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series

SMD ceramic trap TPSKA_B is small and thin SMD trap

sealed with a metal cap. Recommended for LCD-TVs, and

small and thin tuners.

s Features

1. High attenuation and high performance group

delay time

2. Small and thin pakage

3. Reflow-solderable

(1) : Input
(2) : Ground
(3) : Output

7.9

0.2

3.0

0.1

8.5

0.2

3.8

0.2

1.8

0.2

0.5

0.1

0.6

0.2

1.0

0.1

1.3

0.2

2.5

0.2 2.5

0.2

0.3

0.1

1.3

0.2

(1)

(2)

(3)

(in mm)

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Attenuation

(at fn1)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPSKA4M50B00-R1

4.500

35 min.

50 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Land Pattern Dimensions

1.0

1.5

.
8

1.0

s Test Circuit

RF
Voltmeter

S.S.G.

Rg=50

R1=330

R2=1.0k

L=15

s Frequency Characteristics

t
t
e

t
i
o

(
d

)

Frequency (MHz)

4.0

4.2

4.1

4.3

4.5

4.7

4.9

4.4

4.6

4.8

5.0

s Frequency Characteristics (Spurious)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

1.0

2.0

3.0

4.0

5.0

.
D

.
T

.

(
n

)

700

600

500

400

300

200

100

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 4.5-6.5MHz Chip Type Double Traps TPWKA Series

SMD ceramic trap TPWKA is small and thin SMD trap

sealed with a metal cap. Recommended for LCD-TVs, and

small and thin tuners.

This series consist of 2 wafers with 2 trap

frequencies. Recommended for Multi standard set.

s Features

1. Good performance of attenuation

2. Small and thin package

3. Reflow-solderable

7.9

0.2

4.2

0.1

8.5

0.2

5.0

0.2

0.4

0.2

1.0

0.1

0.3

0.1

.
4

.
1

.
5

.
2

.
3

.
2

.
3

.
2

2.5

0.2 2.5

0.2

(1) : Input or Output
(2) : Ground
(3) : Output or Input

(in mm)

(1)

(2)

(3)

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Nominal Center
Frequency (fn2)

(MHz)

Attenuation

(at fn1)

(dB)

Attenuation

(at fn2)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPWKA5M50B04-R1

5.500

5.742

30 min.

50 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Land Pattern Dimensions

1.2

1.3

1.2

.
9

.
8

(in mm)

s Test Circuit

L = 8.2

RF
Voltmeter

Rg = 50

R1 = 150

R2 = 330

C2 = 10pF (Including stray capacitance and input capacitance of RF voltmeter)

S.S.G.

s Frequency Characteristics

4.5

4.7

4.9

5.1

5.3

5.5

5.7

5.9

6.1

6.3

6.5

t
t
e

t
i
o

(
d

)

Frequency (MHz)

s Frequency Characteristics (Spurious)

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 4.5-6.5MHz Standard Lead Type TPSRA Series

As part of the environment protection activity, solder

for terminal plating and terminal-element connection

inside of ceramic filter TPSRA series contain no

lead (Pb).

This series consist of two trap element on one wafer.

Suitable for the sound IF trap of CTV/VCR.

s Features

1. Good performance of attenuation

2. Shape factor can be changed by the value of

Inductor "L".

3. Three-terminals type

4. Low profile (H=7.0mm max.)

5. Lead dimension:

Improved mounting reliability (cut & clinch) due to

round terminal.

10.0 max.

7.0

(Ref.)

2.5

0.2

2.5

0.2

(3)

(2)

(1)

(1) : Input
(2) : Ground
(3) : Output

.
0

.
5

.
4

.
1

.
9

(
R

f
.
)

.
0

3--0.8

(in mm)

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Attenuation

(at fn1)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPSRA4M50B00-B0

4.500

35 min.

50 min.

TPSRA4M50C00-B0

4.500

30 min.

TPSRA5M50B00-B0

5.500

35 min.

70 min.

TPSRA5M74B00-B0

5.742

35 min.

70 min.

TPSRA6M00B00-B0

6.000

35 min.

70 min.

TPSRA6M50B00-B0

6.500

35 min.

70 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

TPSRA4M50B00-B0

Rg=50ohm

S.S.G.

220ohm

8.2

.
2

R.F.
Voltmeter

TPSRA4M50C00-B0

R.F.
Voltmeter

Rg=50ohm

S.S.G.

330ohm

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Test Circuit

TPSRA5M50/5M74/6M00/6M50B00-B0

Rg=50ohm

S.S.G.

220ohm

R.F.
Voltmeter

s Frequency Characteristics

TPSRA4M50B00-B0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

4.0

4.1

4.2

4.3

4.4

4.5

4.6

4.7

4.8

4.9

5.0

TPSRA4M50C00-B0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

4.0

4.1

4.2

4.3

4.4

4.5

4.6

4.7

4.8

4.9

5.0

TPSRA5M50B00-B0

5.0

5.2

5.3

5.1

5.4

5.5

5.6

5.7

5.9

5.8

6.0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA5M74B00-B0

5.2

5.4

5.5

5.3

5.6

5.7

5.8

5.9

6.1

6.0

6.2

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA6M00B00-B0

5.5

5.7

5.8

5.6

5.9

6.0

6.1

6.2

6.4

6.3

6.5

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA6M50B00-B0

6.0

6.2

6.3

6.1

6.4

6.5

6.6

6.7

6.9

6.8

7.0

t
t
e

t
i
o

(
d

)

Frequency (MHz)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

TPSRA4M50B00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA4M50C00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA5M50B00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA5M74B00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA6M00B00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

TPSRA6M50B00-B0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

200

400

600

800

.
D

.
T

.
(
n

)

t
t
e

t
i
o

(
d

)

Frequency (MHz)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 3.5-6.5MHz Two Lead Type TPSRD Series

Ceramic Trap TPSRD_J series are two-terminals type.

Which are recommended for the attenuation of sound IF

in B/W TV and the attenuation of chroma signal in

Video Camcorder.

s Features

1. Small-size, lightweight

2. High performance, durability

3. Easy to design due to two-terminals type

10.0 max.

.
0

0.5

0.1

1.38

0.2

.
3

.
1

.
0

5.0

0.2

E I A J

C O D E

in mm

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Attenuation

(at fn1)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPSRD3M58J00-B0

3.580

20 min.

20 min.[20dB Att.BW]

TPSRD4M43J00-B0

4.430

20 min.

40 min.[20dB Att.BW]

TPSRD4M50J00-B0

4.500

20 min.

30 min.[20dB Att.BW]

TPSRD5M50J00-B0

5.500

20 min.

30 min.[20dB Att.BW]

TPSRD6M00J00-B0

6.000

20 min.

40 min.[20dB Att.BW]

TPSRD6M50J00-B0

6.500

20 min.

40 min.[20dB Att.BW]

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

R.F.
Voltmeter

Rg=50

S.S.G.

Ceramic
Trap

s Frequency Characteristics

TPSRD3M58J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

3.1

3.4

3.5

3.7

3.9

3.2

3.3

3.6

3.8

4.0

4.1

TPSRD4M43J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

3.9

4.2

4.3

4.5

4.7

4.0

4.1

4.4

4.6

4.8

4.9

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

TPSRD4M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

4.0

4.3

4.4

4.6

4.8

4.1

4.2

4.5

4.7

4.9

5.0

TPSRD5M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.0

5.3

5.4

5.6

5.8

5.1

5.2

5.5

5.7

5.9

6.0

TPSRD6M00J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.5

5.8

5.9

6.1

6.3

5.6

5.7

6.0

6.2

6.4

6.5

TPSRD6M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

6.0

6.3

6.4

6.6

6.8

6.1

6.2

6.5

6.7

6.9

7.0

s Frequency Characteristics (Spurious)

TPSRD3M58J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPSRD4M43J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPSRD4M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPSRD5M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics (Spurious)

TPSRD6M00J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPSRD6M50J00-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 3.5-6.5MHz for 2ch Sound TV in Germany TPSRD Series

Ceramic trap TPSRD_W series has same structure as

TPSRD_B series. But they can trap two individual

frequencies at one time. Recommended for two channel

multi-sound TV systems.

s Features

1. Space saving

2. Three-terminals type

1.38

0.2

.
0

7.0

2.0

.
0

0.5

0.1

.
0

1.7

0.1

.
3

.
1

2.5

0.2

2.5

(3)

(2)

(1)

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Nominal Center
Frequency (fn2)

(MHz)

Attenuation

(at fn1)

(dB)

Attenuation

(at fn2)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPSRD5M50W00-B0

5.500

5.742

32 min.

25 min.

70 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

R.F.
Voltmeter

Rg=50ohm

S.S.G.

330ohm

s Frequency Characteristics

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.0

5.3

5.4

5.6

5.8

5.1

5.2

5.5

5.7

5.9

6.0

s Frequency Characteristics (Spurious)

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 3.5-6.5MHz Double Traps TPWRD Series

Ceramic trap TPWRD_B series consist of two wafers with

two trap frequencies. Recommended for Dual standard

sets.

s Features

1. Good performance of attenuation

2. Small and thin package

3. Three-terminals type

1.38

0.2

.
0

7.0

2.0

.
0

1.7

0.1

2.5

0.2

2.5

0.2

T W

.
5

.
0

.
3

.
1

0.5

0.1

E I A J
C O D E

(in mm)

(3)

(2)

(1)

(1) : Input
(2) : Ground
(3) : Output

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Nominal Center
Frequency (fn2)

(MHz)

Attenuation

(at fn1)

(dB)

Attenuation

(at fn2)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPWRD5M50B02-B0

5.500

6.500

30 min.

50 min.

TPWRD5M50B03-B0

5.500

6.000

30 min.

50 min.

TPWRD5M50B04-B0

5.500

5.742

30 min.

50 min.

TPWRD6M00B01-B0

6.000

6.500

30 min.

70 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

Rg=50ohm

S.S.G.

150ohm

8.2

R.F.
Voltmeter

s Frequency Characteristics

TPWRD5M50B02-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.0

5.6

5.8

6.2

6.6

5.2

5.4

6.0

6.4

6.8

7.0

TPWRD5M50B03-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

4.5

5.1

5.3

5.7

6.1

4.7

4.9

5.5

5.9

6.3

6.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

TPWRD5M50B04-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

4.5

5.1

5.3

5.7

6.1

4.7

4.9

5.5

5.9

6.3

6.5

TPWRD6M00B01-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

5.0

5.6

5.8

6.2

6.6

5.2

5.4

6.0

6.4

6.8

7.0

s Frequency Characteristics (Spurious)

TPWRD5M50B02-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPWRD5M50B03-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPWRD5M50B04-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

TPWRD6M00B01-B0

Frequency (MHz)

t
t
e

t
i
o

(
d

)

0.0

3.0

4.0

6.0

8.0

1.0

2.0

5.0

7.0

9.0

10.0

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Trap 3.5-6.5MHz Triple Traps TPTRD Series

Ceramic trap TPTRD_B series consist of 3 wafers with

3 trap frequencies. Recommended for Multi standard sets.

s Features

1. Good performance of attenuation

2. Space saving for Multi set

3. Three-terminals type

1.38

0.2

.
0

8.0

2.0

.
0

1.7

0.1

2.5

0.2

2.5

0.2

T T

5
.
0

m

a
x
.

.
3

.
1

0.5

0.1

E I A J

C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

(1)

(2)

(3)

Part Number

Nominal Center
Frequency (fn1)

(MHz)

Nominal Center
Frequency (fn2)

(MHz)

Nominal Center
Frequency (fn3)

(MHz)

Attenuation

(at fn1)

(dB)

Attenuation

(at fn2)

(dB)

Attenuation

(at fn3)

(dB)

30dB Attenuation

BW (fn1)

(kHz)

TPTRD5M50B01-B0

5.500

6.000

6.500

30 min.

50 min.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Test Circuit

Rg=50ohm

S.S.G.

150ohm

8.2

R.F.
Voltmeter

s Frequency Characteristics

Frequency (MHz)

5.000

5.500

6.000

6.500

7.000

t
t
e

t
i
o

(
d

)

s Frequency Characteristics (Spurious)

Frequency (MHz)

0.0

2.5

5.0

7.5

10.0

t
t
e

t
i
o

(
d

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Discriminator 10.7MHz Ultra Thin Chip Type CDSCB Series

CDSCB10M7 series forms a resonator on a piezoelectric

ceramic substrate. In combination with ICs, this type

obtains stable demodulation characteristics in a wide

bandwidth.

They have 1.0mm max. thickness and small mounting area

(4.5x2.0mm).

s Features

1. Compact and high reliability and recommended for

automotive applications.

2. Can be combined with various ICs. The IC is

determined by the last number in the part number.

3. Stable demodulation characteristics can be

obtained without adjustment.

4. Stable temperature characteristics

5. Recommended for Pb free soldering

4.1 max.

1
.
0

m

a
x
.

4.5

0.1

0.2

.
0

.
1

.
3

.
2

0.4(ref.)

.
4

0.4

0.05

1.5

0.1

0.8

0.1

0.8

0.1

1.5

0.1

(in mm)

Part Number

Center Frequency (fo)

(MHz)

Recovered Audio 3dB BW

(kHz)

Recovered Audio Output

(mV)

Distortion

(%)

Detection

Method

CDSCB10M7GA105A-R0

10.700

30kHz

220 min.

110 min.

1.5 max.

TEA5757HL

Quadrature

CDSCB10M7GA113-R0

10.700

30kHz

300 min.

110 min.

1.0 max.

TA2154FN

Quadrature

CDSCB10M7GA119-R0

10.700

30kHz

500 min.

75 min.

1.0 max.

TRF6901

Quadrature

CDSCB10M7GA121-R0

10.700

30kHz

390 min.

80 min.

1.0 max.

LV23100V

Quadrature

CDSCB10M7GF072-R0

10.700 (fn)

150 min.

130 min.

2.0 max.

TA31161

Quadrature

CDSCB10M7GF107-R0

10.700 (fn)

80 min.

52 min.

3.0 max.

TA31272F

Quadrature

CDSCB10M7GF109-R0

10.700 (fn)

100 min.

170 min.

3.0 max.

TK14588V

Quadrature

(fn) means nominal center frequency.

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Combination A,B,C,D,E

Combination A,B,C

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Standard Land Pattern Dimensions

.
6

1.0

2.0

1.0

3.0

(in mm)

s Test Circuit

CDSCB10M7GA105A-R0

4.7

150

S.S.G.

Vcc (3.0V)

.
1

.
4

TEA5757HL

(PHILIPS)

X : CDSCB10M7GA105A-R0

0.1

100

100k

(
n

)

(
p

)

AF OUT

DC OUT

330p

0.22

.
1

Unit C

: F
:

CDSCB10M7GA113-R0

2.2

D.C. OUT

S.S.G.

Vcc (1.2V)

AF OUT

.
0

TA2154FN (TOSHIBA)

X : CDSCB10M7GA113-R0

.
0

Unit C

: F
:

CDSCB10M7GA119-R0

0.01

0.47

2.2

0.1

0.22

4.7

120p

220k

68p

15p

82p

47p

1000p

100p

10k

IF Input

AF Output

Vcc (3.0V)

(TEXAS INSTRUMENTS)

TRF6901

PIC16F84

Unit C

: F
:

: H

X : CDSCB10M7GA119-R0

13 14 15 16 17 18 19 20 21 22 23 24

48 47 46 45 44 43 42 41 40 39 38 37

18 17 16 15 14 13 12 11 10

CDSCB10M7GA121-R0

0.47

0.01

AF Output

D.C. Output

LV23100V (SANYO)

PIC16F84 (Control IC)

10k

Vcc (3.2V)

0.047

.
0

2.2

0.1

.
0

0.015

0.01

3.3k

S.G.

Unit C

: F
:

X : CDSCB10M7GA121-R0

36 35 34 33 32 31 30

27 26 25 24 23 22 21 20 19

10 11 12 13 14 15 16 17 18

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Test Circuit

CDSCB10M7GF072-R0

Vcc (3V)

IF IN

AF OUT

0.01

10p

4.7

0.01

.
0

TA31161 (TOSHIBA)

X : CDSCB10M7GF072-R0
R : 820

Unit C

: F
:

: H

CDSCB10M7GF107-R0

20 19 18 17 16 15 14 13

10 11 12

TA31272FN (TOSHIBA)

S.S.G.

X : CDSCB10M7GF107-R0
R : 1.2k
C : open

0.01

0.1

0.01

AF OUT

Vcc (5.0V)

0.1

0.01

.
0

Unit C

: F
:

CDSCB10M7GF109-R0

0.01

Vcc (3V)

12k

51k

1000p

S.S.G.

D.C. OUT

AF OUT

.
0

.
7

.
0

.
2

TK14588V (TOKO)

Unit C

: F
:

: H

X : CDSCB10M7GF109-R0
R : 820

s Frequency Characteristics

CDSCB10M7GA105A-R0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

Input
fdev.
fmod.
Vcc

= 100 dB

75kHz

= 1kHz
= 3.0V

100

1000

10.3

10.4

10.5

10.6

10.7

10.8

10.9

11.0

11.1

0.1

100

AF Output

Distortion

CDSCB10M7GA113-R0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

Input
fdev.
fmod.
Vcc

= 100 dB

75kHz

= 1kHz
= 1.2V

100

1000

10.3

10.4

10.5

10.6

10.7

10.8

10.9

11.0

11.1

0.1

100

AF Output

Distortion

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

CDSCB10M7GA119-R0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

input
fdev.
fmod.
Vcc

= 100 dB

60kHz

= 1kHz
= 3.0V

100

1000

10.3

10.4

10.5

10.6

10.7

10.8

10.9

11.0

11.1

0.1

100

AF Output

Distortion

CDSCB10M7GA121-R0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

Input
fdev.
fmod.
Vcc

= 100 dB

75kHz

= 1kHz
= 3.2V

100

1000

10.3

10.4

10.5

10.6

10.7

10.8

10.9

11.0

11.1

0.1

100

AF Output

Distortion

CDSCB10M7GF072-R0

t
p

t

V

l
t
a

(
m

)

.
H

.
D

.

(
%

)

Frequency (MHz)

100

1000

100

0.1

10.3

10.5

10.7

10.9

11.1

Input =

fdev. =

fmod. =

Vcc =

100dB

80kHz

1kHz
3.0V

CDSCB10M7GF107-R0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

10.5

10.4

10.6

10.7

10.8

10.9

11.0

100

1000

0.1

100

AF Output

Distortion

Input Level
Mod. Freq.
Freq.Dev.

100dB

1000Hz

40kHz

Input signal conditions

CDSCB10M7GF109-R0

t
p

t

V

l
t
a

(
m

)

.
H

.
D

.

(
%

)

Frequency (MHz)

1000

100

0.1

10.3

10.5

10.7

10.9

11.1

Input =

fdev. =

fmod. =

Vcc =

100dB

64kHz

1kHz
3.0V

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Discriminator 10.7MHz Standard Lead Type CDALA Series

CDALA10M7 series forms a resonator on a piezoelectric

ceramic substrate. In combination with ICs, this type

obtains stable demodulation characteristics in wide

bandwidths.

s Features

1. Compact and excellent mechanical strength

2. Can be combined with various ICs. The IC is

determined by the last number in the part number.

3. Stable demodulation characteristics can be obtained

without adjustment.

4. Stable temperature characteristics

5. We recommend combination: ceramic discriminator

CDALA10M7 series and "CERAFIL" SFELA10M7 of the

same frequency rank.

Freq. Rank (Color Dot)

.
0

8.0

1.0

.
0

0.4

0.1

.
0

0.5

0.1

.
3

.
1

0.65

0.1

(in mm)

5.0

0.2

M A R K I N G

E I A J

C O D E

CDALA10M7G_ Series

Freq. Rank (Color Dot)

.
0

8.0

1.0

.
0

0.4

0.1

.
0

0.5

0.1

.
3

.
1

0.65

0.1

(in mm)

5.0

0.2

M A R K I N G

E I A J

C O D E

CDALA10M7C_ Series

Part Number

Center Frequency (fo)

(MHz)

Recovered Audio 3dB BW

(kHz)

Recovered Audio Output

(mV)

Distortion

(%)

Detection

Method

CDALA10M7GA001-B0

10.700

30kHz

0.6 max.

CX20029

Quadrature

CDALA10M7GA016-B0

10.700

30kHz

300 min.

within60 to 90mV

0.9 max.

TA8122F

Quadrature

CDALA10M7GA018-B0

10.700

30kHz

300 min.

within60 to 90mV

0.9 max.

TA8132N

Quadrature

CDALA10M7GA046-B0

10.700

30kHz

330 min.

280 min.

1.0 max.

LA1832

Quadrature

CDALA10M7GA048-B0

10.700

30kHz

400 min.

700 min.

1.0 max.

LA1835

Quadrature

CDALA10M7GA092-B0

10.700

30kHz

300 min.

60 min.

1.0 max.

TA2132P

Quadrature

CDALA10M7CA001-B0

10.700

30kHz

242 min.

35 min.

1.0 max.

CX20091

Quadrature

CDALA10M7CA005A-B0

10.700

30kHz

100 min.

600 min.

6.0 max.

LA7770

Quadrature

CDALA10M7CA040-B0

10.700

30kHz

130 min.

40 min.

0.7 max.

TEA5710

Quadrature

The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.

CDALA10M7GA018-B0: Color dot is different from standard series.

s Standard Center Frequency Rank Code

CODE

30kHz Step

10.64MHz

30kHz

10.67MHz

30kHz

10.70MHz

30kHz

10.73MHz

30kHz

10.76MHz

30kHz

25kHz Step

10.650MHz

25kHz

10.675MHz

25kHz

10.700MHz

25kHz

10.725MHz

25kHz

10.750MHz

25kHz

Color Code

Black

Blue

Red

Orange

White

Combination A,B,C,D,E

Combination A,B,C

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Test Circuit

CDALA10M7GA001-B0

0.01

280

AFC

CX20029

Vcc=+3.0V

Unit
R :

C : F

S.S.G.

REF

AF OUTPUT

CDALA10M7GA016-B0

.
5

.
1

.
0

VCC +3V

DC Out AF Out

CDACV10M7GA016

SFELA10M7DF00

IF in

TA8122F (TOSHIBA)

10 11 12

24 23 22 21 20 19 18 17 16 15 14 13

Unit
R :

C : F

CDALA10M7GA018-B0

24 23 22 21 20 19 18 17 16 15 14 13

10 11 12

TA8132N (TOSHIBA)

1F in

Vcc 3V

DC out

AF out

SFELA10M7DF00

.
0

.
1

2.2

0.033

0.022

330p

Vcc 3V

Unit
R :

C : F

CDALA10M7GA046-B0

LA1832 (SANYO)

AFC

IF-IN

300

0.047

100

2.2

270

REG

CDALA10M7GA046

Vcc (5V)

AF OUT

Unit
R :

C : F

0.01

CSBLA456KE2ZF15

1200p

0.047

5.6k

6.8k

3.3

CDALA10M7GA048-B0

3.3

LA1835 (SANYO)

VCC(7V)

AFC

47n

15k

300

47n

IF-IN

0.047

0.47

CSBLA456KE2ZF15

33n

1500p

33n

REG.

1k 1k

Lch

Rch

20k

CDALA10M7GA048

L. P. F.

+ +

Unit
R :

C : F

CDALA10M7GA092-B0

TA2132P(TOSHIBA)

DC OUT

AF OUT

Vcc(3.0V)

IF-IN

.
7

.
0

CDALA10M7GA092

2.2

Unit
R :

C : F

CDALA10M7CA001-B0

.
1

.
0

0.01

IF in

CX20090 (SONY)

VCC 5V

AF Output

AFC

Ref.

.
7

28 27

25 24 23 22

21 20 19

18 17

16 15

11 12

13 14

Unit
R :

C : F

CDALA10M7CA005A-B0

IC : LA7770 (SANYO)

DC Bias

+5V

DC Bias

+5.2V

DATA OUT

.
0

.
1

.
0

.
1

.
6

220p

10k

Demod.OUT

Vcc=12V

IF IN

Unit
R :

C : F

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Test Circuit

CDALA10M7CA040-B0

TEA5710 (PHILIPS)

100

0.01

0.22

100

0.01

0.22

VCC (3V)

AF-OUT

DC-OUT

S.S.G.

280

Unit
R :

C : F

s Frequency Characteristics

CDALA10M7GA001-B0

0.1

100

500

10.6

10.5

10.7

10.8

10.9

11.0

10.4

Frequency (MHz)

Input Level
Mod. Freq.
Freq.Dev.

110dB

400Hz

22.5kHz

Input signal conditions

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Distortion

AF Output

CDALA10M7GA016-B0

0.1

100

500

10.6

10.5

10.7

10.8

10.9

11.0

10.4

Frequency (MHz)

80dB

1000Hz

22.5kHz

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Distortion

AF Output

Input Level
Mod. Freq.
Freq.Dev.

Input signal conditions

CDALA10M7GA018-B0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

100

1000

0.1

100

10.4

10.5

10.6

10.7

10.8

10.9

11.0

Input Level 80 dB

Mod. Freq. 1000 Hz
Freq. Dev.

22.5 kHz

Distortion

AF Output

Input signal conditions

CDALA10M7GA046-B0

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

100

1000

10.5

10.4

10.6

10.7

10.8

10.9

11.0

0.1

100

Input Level 112 dB

Mod. Freq. 1000 Hz

Freq. Dev.

75 kHz

AF Output

Distortion

Input signal conditions

r
e

t
p

t

V

l
t
a

(
m

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Frequency Characteristics

CDALA10M7GA048-B0

0.1

100

500

10.6

10.5

10.7

10.8

10.9

11.0

10.4

Frequency (MHz)

r
e

t
p

t

V

l
t
a

(
m

)

Input Level
Mod. Freq.
Freq.Dev.

112dB

1000Hz

75kHz

Input signal conditions

Distortion

AF Output

i
s

t
o

r
t
i
o

(
%

)

CDALA10M7GA092-B0

0.1

100

500

Frequency (MHz)

10.5

10.4

10.6

10.7

10.8

10.9

11.0

AF Output

Distortion

i
s

t
o

r
t
i
o

(
%

)

Input signal conditions

r
e

t
p

t

V

l
t
a

(
m

)

Input Level

80dB

Mod.Freq.

1000Hz

Freq.Dev.

22.5kHz

CDALA10M7CA001-B0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

100

1000

10.5

10.4

10.6

10.7

10.8

10.9

11.0

0.1

100

Input Level 110 dB

Mod. Freq. 400 Hz

Freq. Dev.

22.5 kHz

AF Output

Distortion

Input signal conditions

CDALA10M7CA005A-B0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

100

1000

5000

10.6

10.7

10.8

100

500

Input Level 100 dB

Mod. Freq. 1000 Hz

Freq. Dev.

75 kHz

AF Output

Distortion

Input signal conditions

CDALA10M7CA040-B0

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
t
i
o

(
%

)

Frequency (MHz)

100

1000

10.5

10.6

10.7

10.8

10.9

0.1

100

10.4

11.0

Input Level 100 dB

Mod. Freq. 1000 Hz

Freq. Dev.

22.5 kHz

AF Output

Distortion

Input signal conditions

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Please see following table for reference applied IC.

If you can not find IC part number seeking, please contact our sales representative.

ex. : CDALA10M7GA016-B0

Suffix Number

CDSCB10M7GA105A-R0

Suffix Number

IC Manufacturer

IC Part Number

Suffix Number

SAMSUNG

SANYO

SONY

T. I.

KA22425

KA2244

KA22901

KA2292

KA2295

KA2297

KA2298B

KB22902

S1A0903

LA1150

LA1225M

LA1260

LA1805

LA1810

LA1814M

LA1816

LA1822

LA1823

LA1827M

LA1830

LA1831

LA1832 / M

LA1833

LA1835 / M

LA1838 / M

LA7770

LV23000M

LV23100V

CX1691M

CX-20029

CX-20076

CXA1030P

CXA1111

CXA1238

CXA1238N

CX1343M

CXA1376AM

CXA1538M / N / S

CXA1611

CXA1619B

CXA1991N

CX3067M

TRF6901

089

059

090

063

064

091

065

103

118A

070

108A

007

026

022

115

015

094

101

083

037

043

046

086

048

079

023

114

121

078

001

002

012

093

027

027N

032

054

069

075

117

068

076

119

IC Manufacturer

IC Part Number

Suffix Number

ATMEL

INFINEON

MATSUSHITA

MOTOROLA

NEC

PHILIPS

RFMD

ROHM

U2501B

U2765B

U4313B

U4490B

U829B

TDA1576T

TDA6160X

TDA6160-2X

AN6138SH

AN7004

AN7006S

AN7007SU

AN7232

MC13156

MC13158

MC13173

MC3363

PC1391M

NE604

SA605

SA626

SA636DK

SA639

TBA120U

TBA229-2

TDA1596T

TDA2557

TEA5591

TEA5592

TEA5594

TEA5710

TEA5712T

TEA5757HL

TEA5762 / 5757

UAA3220TS

RF2905

RF2925

BA1440

BA1448

BA4110

BA4220

BA4230AF

BA4234L

BA4240L

028

095

081

034V

025

051

038

044

097

011

014A

013

053

049

073

052

087

056

020

042

047

096

085

029

021A

120

024

017

030

035

040

055

105A

061

098

111

104

019

060

066

041

005

004

067

Continued on the following page.

Ceramic Discriminator 10.7MHz Applied IC Reference Table

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

IC Manufacturer

IC Part Number

Suffix Number

TOKO

TOSHIBA

TK14570L

TK14581

TK14583V

TK14588V

TA2003

TA2007

TA2008A / AN

TA2022

TA2029

TA2046

TA2057

TA2099N

TA2104AFN

TA2104F

TA2111N / F / FN

TA2132

TA2132BP

TA2142FN

TA2149AN

TA2149N

TA2154FN

TA2159F

TA31161

TA31272F

TA7130P

TA7303P

TA7640AP

TA7765AF

TA8122AN / AF

TA8132AN / AF

TA8186

TA8721ASN

122

062

112

109

031

033

045

050

036

058

057

082

080

080A

077

092

092D

102

100A

100

113

116

072

107

009

008

006

071

016

018

039

088

Continued from the preceding page.

Ceramic Discriminator 10.7MHz Applied IC Reference Table

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Ceramic Discriminator 10.7MHz Applied Circuit

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s LA1140 (Automotive Radio)

AFC

LA1140

(SANYO)

SFELA10M7HAA0-B0

C.F.

AGC

C.F.

0.047 x 2

Vref.

0.047

4.7

12k

33p

0.047

2.2

200

330

220k

47k

0.047

0.022

100

10k

33p

22k

0.047
C

150k

1.8k

2.2

FRONT

END

s CXA1019M (Radio)

FM PF

FM OSC

RIPPLE
FILTER

REGULATOR

TUNING
METER

VOL

CXA1019M(SONY)

FM IF
AMP
DETECTOR

AF
PRE/POWER
AMP

AM IF
AMP
DETECTOR

FM
FRONT
END

AM
FRONT
END

FM
BPF

METER

AM IF
IN

Vcc

AF IN

VOL

AM OSC

AM ANT

DEP
OUT

FM/AM
BAND SELECT

REG
OUT

FM DISCRI

FM IF
IN

FM CERAFIL

(SFELA10M7FA00-B0)

CERAMIC DISCRIMINATOR

(CDALA10M7CA001-B0)

IF
OUT

AM CERAFIL

(SFULA455KU2B-B0)

20 16

No adjustment is needed the FM detection stage due to use the ceramic discriminator.

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Ceramic Discriminator 10.7MHz Applied Circuit

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s TA8122F (Radio)

IS2236

CSBLA456KE2ZF16-B0

CDALA
10M7GA16-B0

SFELA10M7FA00-B0

SFULA455KU2B-B0

TA8122F(TOSHIBA)

100k

15p

LPF1

LPF2

VCO

FM
PF

AM
PF

FM
OSC

AM
OSC

DEF
OUT

MPX
IN

OUT
L

OUT
R

QUAD

ST
LED

TUN
LED

FM
IF IN

AM
IF IN

AM
AGC

FM
RF IN

AM
MIX

FM
MIX

GND2

Vcc2

GND1

OUT

Vcc1

0.022

.
1

4.7

.
0

0.033

.
0

.
1

.
0

Vcc

(3V)

DECODER

Phase

COM

Phase

COM

VCO

Freq

Divider

HYX

LED

TUN

LED

DET

PRE

DET

AGC

MIX

OSC

AM/FM

MONO SW

BPF

Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Discriminator 3.5-6.5MHz Wide Bandwidth Type CDSRH Series

Ceramic discriminator CDSRH series is a wide band, low

profile type using thickness shear mode vibration.

s Features

1. Low profile 8.0mm type

2. Suitable for Multi-sound Broadcasting system

3. Two-terminals type and three-terminals type are

available.

10.0 max.

.
0

0.5

0.1

.
0

1.38

0.2

.
3

.
1

M A R K I N G

E I A J

C O D E

(in mm)

5.0

0.2

CDSRH_EK Series

10.0 max.

.
0

(3) (2) (1)

1.38

0.2

.
0

0.5

0.1

1.7

0.1

.
3

.
1

2.5

0.2

2.5

0.2

M A R K I N G

EIAJ

CODE

(in mm)

(1) : Input
(2) : Ground
(3) : Output

CDSRH_CK Series

Part Number

Nominal Center

Frequency (fn)

(MHz)

Recovered

Audio 3dB BW

(kHz)

Recovered Audio

Output Voltage (at fn)

(mV)

Distortion

(%)

Detection Method

CDSRH4M50EK020-B0

4.500

80 min.

245 min.

1.0 max.

LA7550/7555

Quadrature

CDSRH4M50EK023-B0

4.500

60 min.

230 min.

2.5 max.

M51496P

Quadrature

CDSRH4M50EK035-B0

4.500

55 min.

240 min.

1.0 max.

LA7680/7681

Quadrature

CDSRH4M50EK049-B0

4.500

100 min.

220 min.

1.0 max.

LA7577

Quadrature

CDSRH4M50EK060-B0

4.500

90 min.

1.0 max.

M52318SP

Quadrature

CDSRH4M50EK069-B0

4.500

60 min.

320 min.

1.5 max.

TA8701N

Quadrature

CDSRH4M50EK070-B0

4.500

50 min.

65 min.

1.5 max.

M52007FP

Quadrature

CDSRH5M50EK023-B0

5.500

45 min.

220 min.

1.0 max.

M51496P

Quadrature

CDSRH5M50EK035-B0

5.500

80 min.

350 min.

1.0 max.

LA7680/7681

Quadrature

CDSRH5M50EK049-B0

5.500

60 min.

500 min.

1.0 max.

LA7577

Quadrature

CDSRH5M50EK054-B0

5.500

100 min.

300 min.

1.2 max.

TDA3857

Quadrature

CDSRH5M50EK060-B0

5.500

70 min.

190 min.

1.5 max.

M52318SP

Quadrature

CDSRH5M74EK054-B0

5.742

90 min.

340 min.

1.2 max.

TDA3857

Quadrature

CDSRH6M00EK049-B0

6.000

60 min.

500 min.

1.0 max.

LA7577

Quadrature

CDSRH6M00EK054-B0

6.000

90 min.

340 min.

1.5 max.

TDA3857

Quadrature

CDSRH6M00EK060-B0

6.000

60 min.

180 min.

2.5 max.

M52318SP

Quadrature

CDSRH6M50EK020-B0

6.500

110 min.

350 min.

1.2 max.

LA7550/7555

Quadrature

CDSRH6M50EK049-B0

6.500

60 min.

500 min.

1.0 max.

LA7577

Quadrature

CDSRH6M50EK054-B0

6.500

90 min.

340 min.

1.5 max.

TDA3857

Quadrature

CDSRH6M50EK060-B0

6.500

60 min.

160 min.

2.5 max.

M52318SP

Quadrature

CDSRH4M50CK020-B0

4.500

50 min.

280 min.

2.0 max.

PC1382C

Quadrature

CDSRH4M50CK026-B0

4.500

40 min.

70 min.

1.2 max.

LA7530

Quadrature

CDSRH4M50CK029-B0

4.500

65 min.

250 min.

1.2 max.

M51365SP

Quadrature

CDSRH4M50CK030-B0

4.500

40 min.

within130 +30/-20mV

3.0 max.

M51348FP

Quadrature

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Part Number

Nominal Center

Frequency (fn)

(MHz)

Recovered

Audio 3dB BW

(kHz)

Recovered Audio

Output Voltage (at fn)

(mV)

Distortion

(%)

Detection Method

Continued from the preceding page.

CDSRH5M50CK026-B0

5.500

50 min.

500 min.

3.0 max.

LA7530

Quadrature

CDSRH5M50CK029-B0

5.500

70 min.

420 min.

1.5 max.

M51365SP

Quadrature

CDSRH5M50CK030-B0

5.500

55 min.

150 min.

3.0 max.

M51348FP

Quadrature

CDSRH6M00CK026-B0

6.000

50 min.

400 min.

3.0 max.

LA7530

Quadrature

CDSRH6M00CK029-B0

6.000

70 min.

450 min.

1.7 max.

M51365SP

Quadrature

CDSRH6M00CK030-B0

6.000

55 min.

150 min.

3.0 max.

M51348FP

Quadrature

CDSRH6M50CK020-B0

6.500

60 min.

480 min.

2.0 max.

PC1382C

Quadrature

CDSRH6M50CK026-B0

6.500

35 min.

400 min.

3.0 max.

LA7530

Quadrature

CDSRH6M50CK029-B0

6.500

70 min.

430 min.

2.0 max.

M51365SP

Quadrature

Characteristics shown above is as of 100% Dev.

Part Numbers are varied with applied IC.

Please note circuits and specifications are also varied with IC.

s Test Circuit

CDSRH4M50EK049-B0

IF-in

AF-out

5.6k

LA7577 (SANYO)

Vcc (12V)

CDSRH4M50CK029-B0

M51365SP

(MITSUBISHI)

(1)

0.01

4.7

Ground

DC Out

AF Out

Vcc=12V

(3)

(2)

12p

.
0

.
3

Unit C

: F
:

s Frequency Characteristics

CDSRH4M50EK049-B0

300

100

0.1

4.3

4.5

4.7

Frequency (MHz)

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
i
t
o

(
%

)

Distoriton

AF Output

CDSRH4M50CK029-B0

i
s

t
o

r
i
t
o

(
%

)

300

100

0.1

4.3

4.5

4.7

Frequency (MHz)

r
e

t
p

t

V

l
t
a

(
m

)

AF Output

Distoriton

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment

Ceramic Discriminator 3.5-6.5MHz Low Profile Type CDSRL Series

Ceramic discriminator CDSRL series is a wide band, low

profile type using thickness shear mode vibration.

s Features

1. Low profile 6.0mm type

2. Suitable for Multi-sound Broadcasting system

3. Two-terminals type and three-terminals type are

available.

10.0 max.

.
0

0.5

0.1

.
0

1.0

0.2

.
3

.
1

M A R K I N G

E I A J

C O D E

(in mm)

5.0

0.2

CDSRL_EK Series

10.0 max.

.
0

(3) (2) (1)

1.1

0.1

.
0

0.5

0.1

1.7

0.1

.
3

.
1

2.5

0.2

2.5

0.2

M A R K I N G

E I A J
C O D E

(in mm)

(1) : Input
(2) : Ground
(3) : Output

CDSRL_CK Series

Part Number

Nominal Center

Frequency (fn)

(MHz)

Recovered

Audio 3dB BW

(kHz)

Recovered Audio

Output Voltage (at fn)

(mV)

Distortion

(%)

Detection Method

CDSRL4M50EK020-B0

4.500

80 min.

245 min.

1.0 max.

LA7550/7555

Quadrature

CDSRL5M50EK020-B0

5.500

100 min.

330 min.

1.2 max.

LA7550/7555

Quadrature

CDSRL4M50CK020-B0

4.500

50 min.

280 min.

2.0 max.

PC1382C

Quadrature

CDSRL4M50CK029-B0

4.500

65 min.

250 min.

1.2 max.

M51365SP

Quadrature

CDSRL4M50CK030-B0

4.500

40 min.

within130 +30/-20mV

3.0 max.

M51348FP

Quadrature

CDSRL5M50CK030-B0

5.500

55 min.

150 min.

3.0 max.

M51348FP

Quadrature

CDSRL6M00CK029-B0

6.000

70 min.

450 min.

1.7 max.

M51365SP

Quadrature

CDSRL6M00CK030-B0

6.000

55 min.

150 min.

3.0 max.

M51348FP

Quadrature

CDSRL6M50CK020-B0

6.500

60 min.

480 min.

2.0 max.

PC1382C

Quadrature

CDSRL6M50CK026-B0

6.500

35 min.

400 min.

3.0 max.

LA7530

Quadrature

Characteristics shown above is as of 100% Dev.

Part Numbers are varied with applied IC.

Please note circuits and specifications are also varied with IC.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Test Circuit

CDSRL4M50EK020-B0

LA7550 (SANYO)

SIF IN

Vcc 9V

DC5V Chang

0.01

100

.
0

.
2

.
6

AF OUT

CDSRL4M50CK029-B0

M51365SP

(MITSUBISHI)

(1)

0.01

4.7

Ground

DC Out

AF Out

Vcc=12V

(3)

(2)

12p

.
0

.
3

Unit C

: F
:

s Frequency Characteristics

CDSRL4M50EK020-B0

500

100

0.1

4.3

4.5

4.7

300

Frequency (MHz)

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
i
t
o

(
%

)

AF Output

Distoriton

CDSRL4M50CK029-B0

300

100

0.1

4.3

4.5

4.7

Distoriton

Frequency (MHz)

AF Output

r
e

t
p

t

V

l
t
a

(
m

)

i
s

t
o

r
i
t
o

(
%

)

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Soldering and Mounting)

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s CERAFILr 10.7MHz Chip Type SFECS/SFECD Series

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Filter shall be soldered at +280

5°C for 3.0

0.5 seconds.

The soldering iron shall not touch the filter while soldering.

(2) Soldering Iron

r
a

t
u

r
e

(
°
C

)

100

200

240

30 sec.

min.

30 sec.

max.

Peak

(240°C max.)

Pre-heating

(120-170°C)

Heating
(200°C)

Gradual

Cooling

120 sec.

min.

60-120 sec.

s CERAFILr 10.7MHz Chip Type SFECV Series

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Lead terminal is directly contacted with the tip of

soldering iron at +280

5°C for 3.0

0.5 seconds.

(2) Soldering Iron

Time(sec.)

5sec.

150

230

240

r
a

t
u

r
u

(

)

Gradual Cooling

s CERAFILr 10.7MHz Lead Type

The component cannot withstand washing.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Soldering and Mounting)

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s CERAFILr 4.5-6.5MHz Chip Type

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Lead terminal is directly contacted with the tip of

soldering iron at +280

C for 3.0

0.5 seconds.

(2) Soldering Iron

5 sec.

240

230

150

r
a

t
u

r
e

(

)

Gradual Cooling

Time (sec.)

s CERAFILr 3.5-6.5MHz Lead Type

The component cannot withstand washing.

s CERAFILr 455kHz Chip Type PFWCC Series

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Lead terminal is directly contacted with the tip of

soldering iron at +280

C for 3.0

0.5 seconds.

(2) Soldering Iron

Gradual Cooling

5 sec.

150

230

240

Time (sec.)

r
a

t
u

r
e

(

)

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Soldering and Mounting)

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 455kHz Chip Type SFPCA Series

1. Standard Reflow Soldering Condition

(1) Reflow

CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),

Water (Demineralized Water), Cleaning Water Solution

(Cleanthrough-750H, Pine Alpha 100S), Silicon

(Technocare FRW)

2. Wash

(1) Cleaning Solvent

Immersion Wash

2 minutes max. in above solvent at +60

C max.

Shower or Rinse Wash

2 minutes max. in above solvent at +60

C max.

(2) Cleaning Conditions

When components are immersed in solvent, be sure to

maintain the temperature of components below the

temperature of solvent.

Please do not use ultrasonic cleaning.

Total washing time should be within 4 minutes.

Please ensure the component is thoroughly evaluated

in your application circuit.

Please do not use chlorine, petroleum and alkali

cleaning solvents.

If you plan to use any other type of solvents, please

consult with Murata or Murata representative prior to

using.

(3) Notice

Electrode is soldered directly with the tip of soldering iron

at +350

C for 3

1 seconds.

(2) Soldering Iron

Peak

(235

C max.)

Heating

(200

Gradual
Cooling

Pre-heating

(140-160

100

200

240

r
a

t
u

r
e

(

)

30sec. min. 60sec.-120sec.

50sec. max. 120sec. min.

s CERAFILr 455kHz Lead Type

The component cannot withstand washing.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Soldering and Mounting)

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Ceramic Trap 4.5-6.5MHz Chip Type

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Lead terminal is directly contacted with the tip of

soldering iron at +280

C for 3.0

0.5 seconds.

(2) Soldering Iron

5 sec.

240

230

150

r
a

t
u

r
e

(

)

Gradual
Cooling

Time (sec.)

s Ceramic Trap 3.5-6.5MHz Lead Type

The component cannot withstand washing.

s Ceramic Discriminator 10.7MHz Chip Type

1. Standard Reflow Soldering Condition

(1) Reflow

The component cannot withstand washing.

2. Wash

Lead terminal is directly contacted with the tip of

soldering iron at +280

C for 3.0

0.5 seconds.

(2) Soldering Iron

5 sec

Gradual
Cooling

150

240

260

Time (sec.)

r
a

t
u

r
e

(

)

s Ceramic Discriminator 10.7MHz Lead Type

The component cannot withstand washing.

s Ceramic Discriminator 3.5-6.5MHz

The component cannot withstand washing.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

100

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s CERAFILr 10.7MHz Chip Type SFECS/SFECD Series

1. The component will be damaged when an excessive

stress is applied.

2. The component may be damaged if excess mechanical

stress is applied to it mounted on the printed circuit

board.

3. Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of the

board.

4. After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause destruction

resistance characteristics to lower. To prevent this, be

extremly careful in determining shape and dimension

before designing the circuit board diagram.

5. When the positioning claws and pick up nozzle are worn,

the load is applied to the chip while positioning is

concentrated to one positioning accuracy, etc. Careful

checking and maintenance are necessary to prevent

unexpected trouble.

6. When correcting chips with a soldering iron, the tip of the

soldering iron should not directly touch the chip

component. Depending on the soldering conditions, the

effective area of terminations may be reduced. The use

of solder containing Ag should be done to prevent the

electrode erosion.

7. Do not clean or wash the component as it is not

hermetically sealed.

8. In case of covering filter with over coat, conditions such

as material of resin, cure temperature, and so on should

be evaluated carefully.

9. Do not use strong acidity flux, more than 0.2wt% chlorine

content, in re-flow soldering.

10. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miscorrelation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

[Component layout close to board]

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

101

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 10.7MHz Chip Type SFECV Series

1. The component will be damaged when an excessive

stress is applied.

2. The component may be damaged if excess mechanical

stress is applied to it mounted on the printed circuit

board.

3. Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of the

board.

4. After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to lower. To

prevent this, be extremely careful in determining shape

and dimension before designing the circuit board

diagram.

5. When the positioning claws and pick up nozzle are worn,

the load is applied to the chip while positioning is

concentrated to one positioning accuracy, etc. Careful

checking and maintenance are necessary to prevent

unexpected trouble.

6. When correcting chips with a soldering iron, the tip of the

soldering iron should not directly touch the chip

component. Depending on the soldering conditions, the

effective area of terminations may be reduced. the use of

solder containing Ag should be done to prevent the

electrode erosion.

7. Do not clean or wash the component as it is not

hermetically sealed.

8. In case of covering filter with over coat, conditions such

as material of resin, cure temperature, and so on should

be evaluated carefully.

9. Do not use strong acidity flux, more than 0.2wt% chlorine

content, in re-flow soldering.

10. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of mis-

correlation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

[Component direction]

[Component layout close to board]

Put the
component
lateral to the
direction in
which stress
acts.

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

s CERAFILr 10.7MHz Lead Type

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component may be damaged when an excess stress

is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

6. In case of covering discriminator with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

7. Accurate test circuit values are required to

measure electrical characteristics. It may be a

cause of miscorrelation if there is any deviation,

especially stray capacitance, from the test

circuit in the specification.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

102

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s CERAFILr 4.5-6.5MHz Chip Type

1. The component may be damaged if excess mechanical

stress is applied to it mounted on the printed circuit

board.

2. Design layout of components on the PC board to

minimize the stress imposed on the wrap or flexure of the

board.

3. After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause destruction

resistance characteristics to lower. To prevent this, be

extremely careful in determining shape and dimension

before designing the circuit board diagram.

4. When the positioning claws and pick up nozzle are worn,

the load is applied to the chip while positioning is

concentrated to one positioning accuracy, etc. Careful

checking and maintenance are necessary to prevent

unexpected trouble.

5. When correcting chips with a soldering iron, the tip of the

soldering iron should not directly touch the chip

component.

6. Cleaning or washing of the component is not acceptable

due to non sealed construction.

7. In case of covering filter with over coat, conditions such

as material of resin, cure temperature, and so on should

be evaluated carefully.

8. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of

miscorrelation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

[Component direction]

[Component layout close to board]

Put the compon-
ent lateral to
the direction in
which stress
acts.

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

s CERAFILr 3.5-6.5MHz Lead Type

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component may be damaged when an excess stress

is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Please contact Murata or Murata representative for

soldering condition, in case of using lead free

solder.

6. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

7. In case of covering filter with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

8. Accurate test circuit values are required to

measure electrical characteristics. It may be a

cause of miscorrelation if there is any

deviation, especially stray capacitance, from the

test circuit in the specification.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

103

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s CERAFILr 455kHz Chip Type PFWCC Series

1. The component may be damaged if excess mechanical

stress is applied to it mounted on the printed circuit

board.

2. Design layout of components on the PC board to

minimize the stress imposed on the warp or flexure of the

board.

3. After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause

destruction resistance characteristics to lower. To

prevent this, be extremly careful in determining shape

and dimension before designing the circuit board

diagram.

[Component direction]

[Component layout close to board]

Put the
component
lateral to the
direction in
which stress
acts.

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

s CERAFILr 455kHz Chip Type SFPCA Series

1. The component will be damaged when an excessive

stress is applied.

2. Use coupling capacitors to prevent applying D.C.

voltage between input-ground, output-ground of

"CERAFIL" as D.C. current may harm the component.

3. In the case that the component is cleaned, confirm

that no reliability degradation is created.

4. In case of covering filter with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

5. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in re-flow soldering.

6. The product, packed in the moisture-proof bag

(dry pack), is sensitive to moisture. The following

treatment is required before applying re-flow

soldering, to avoid package cracks or reliability

degradation caused by thermal stress. When unpacked,

store the component in an atmosphere of below 25

degree C and below 65% R.H., and solder within 48

hours.

s CERAFILr 455kHz Lead Type

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component will be damaged when an excessive

stress is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

6. In case of covering filter with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

7. Accurate test circuit values are required to

measure electrical characteristics.

It may be a cause of miscorrelation if there is

any deviation, especially stray capacitance, from

the test circuit in the specification.

8. Use coupling capacitors to prevent applying D.C.

voltage between input-ground, output-ground of

"CERAFIL" as D.C. current may harm the component.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

104

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Ceramic Trap 4.5-6.5MHz Chip Type

1. The component may be damaged if excess mechanical

stress is applied to it mounted on the printed circuit

board.

2. Design layout of components on the PC board to

minimize the stress imposed on the wrap or flexure of the

board.

3. After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause destruction

resistance characteristics to lower. To prevent this, be

extremely careful in determining shape and dimension

before designing the circuit board diagram.

4. When the positioning claws and pick up nozzle are worn,

the load is applied to the chip while positioning is

concentrated to one positioning accuracy, etc. Careful

checking and maintenance are necessary to prevent

unexpected trouble.

5. When correcting chips with a soldering iron, the tip of the

soldering iron should not directly touch the chip

component.

6. Cleaning or washing of the component is not acceptable

due to non sealed construction.

7. In case of covering filter with over coat, conditions such

as material of resin, cure temperature, and so on should

be evaluated carefully.

8. Accurate test circuit values are required to measure

electrical characteristics. It may be a cause of

miscorrelation if there is any deviation, especially stray

capacitance, from the test circuit in the specification.

[Component direction]

[Component layout close to board]

Put the compon-
ent lateral to
the direction in
which stress
acts.

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

s Ceramic Trap 3.5-6.5MHz Lead Type

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component may be damaged when an excess stress

is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Please contact Murata or Murata representative for

soldering condition, in case of using lead free

solder.

6. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

7. In case of covering filter with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

8. Accurate test circuit values are required to

measure electrical characteristics. It may be a

cause of miscorrelation if there is any

deviation, especially stray capacitance, from the

test circuit in the specification.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

105

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Ceramic Discriminator 10.7MHz Chip Type

1. The component mounted on the PCB may be damaged if

excess mechanical stress is applied.

2. Layout the components on the PCB to minimize the

stress imposed by the warp or flexure of the board.

3. After installing components, if solder is excessively

applied to the circuit board, mechanical stress will cause

destruction resistance characteristics to be lower. To

prevent this, be extremely careful in determining shape

and dimension before designing the circuit board diagram.

4. When the positioning claw or pick up nozzle are worn, the

excess load is applied to the components while

positioning or placing are performed. Careful checking

and maintenance are necessary to prevent unexpected

trouble.

5. When correcting component's position with a soldering

iron, the tip of the soldering iron should not directly touch

the chip component. Depending on the soldering

conditions, the effective area of terminations may be

reduced. The use of solder containing Ag should be

considerd to prevent the electrode erosion.

6. Do not clean or wash the component as it is not

hermetically sealed.

7. In case of overcoating the part, coating conditions such

as material, curing temperature, and so on must be

evaluated deeply.

8. Accurate test circuit values are required to measure

electrical characteristics.

It may be a cause of miscorrelation if there is any

deviation, especially stray capacitance, from the test

circuit in the specification.

[Component direction]

[Component layout close to board]

Put the
component
laterally to the
direction in
which stress
acts.

Susceptibility to
stress is in the order
of : A>C>B

Slit

Perforation

s Ceramic Discriminator 10.7MHz Lead Type

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component may be damaged when an excess stress

is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

6. In case of covering discriminator with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

7. Accurate test circuit values are required to

measure electrical characteristics. It may be a

cause of miscorrelation if there is any deviation,

especially stray capacitance, from the test

circuit in the specification.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Notice (Handling)

106

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Ceramic Discriminator 3.5-6.5MHz

1. Do not use this product with bend. The component

may be damaged if excess mechanical stress is

applied to it mounted on the printed circuit board.

2. The component may be damaged when an excess stress

is applied.

3. All kinds of re-flow soldering must not be applied

on the component.

4. Do not clean or wash the component as it is not

hermetically sealed.

5. Please contact Murata or Murata representative for

soldering condition, in case of using lead free

solder.

6. Do not use strong acidity flux, more than 0.2wt%

chlorine content, in flow soldering.

7. In case of covering filter with over coat,

conditions such as material of resin, cure

temperature, and so on should be evaluated carefully.

8. Accurate test circuit values are required to

measure electrical characteristics. It may be a

cause of miscorrelation if there is any

deviation, especially stray capacitance, from the

test circuit in the specification.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

107

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

s Minimum Quantity

SFECS

SFECD

SFECV

SFELA

SFELB

SFVLA

SFKLA

SFTLA

SFSKA

SFSRA

SFSRL

SFTRD

SFSRH

PFWCC

SFPCA

SFULA

SFZLA

PFSLA

PFWLA

SFPLA

CFWLA

CFULA

BFULA

TPSKA

TPWKA

TPSRA

TPSRD

TPWRD

TPTRD

CDSCB

CDALA

CDSRH

CDSRL

3,000

1,000

3,000

CERAFILr<10.7MHz>

CERAFILr<3.5-6.5MHz>

CERAFILr<455kHz>

Ceramic Traps<3.5-6.5MHz>

Ceramic Discriminators<10.7MHz>

Ceramic Discriminators<3.5-6.5MHz>

2,000

1,000

2,000

1,500

1,000

1,500

2,000

1,500

2,000

1,500

500

200

500

200

150

200

Box

Magazine

Bulk

Ammo Pack

ш180mm

ш330mm

Taping

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

108

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 10.7MHz Chip Type

SFECS Series

Chip Filter

1.55

0.05

0.15

10 pitch accumulated

User direction of feed

Cover film

Peeling strength
0.1~0.7N

.
3

.
0

.
1

.
0

3°max.

10° max.

(in mm)

.
5

.
0

.
3

4.0

0.1

2.0

0.05

4.0

0.1

3.45

3.35

0.1

.
0

.
2

· Part Number marked side is always facing up.
· The feeding holes side of cavity tape is always input terminal.

SFECD Series

Chip Filter

1.55

0.05

0.15

10 pitch accumulated

User direction of feed

Cover film

Peeling strength
0.1 to 0.7N

.
2

.
0

(
1

.
2

)

.
0

3°max.

10° max.

(in mm)

.
5

.
0

(
4

.
1

)

4.0

0.1

2.0

0.05

4.0

0.1

(3.4)

3.35

0.1

.
0

.
2

· Part Number marked side is always facing up.
· The feeding holes side of cavity tape is always input terminal.

( ) : Reference

SFECV Series

.
7

.
1

.
0

-
0

.
2

.
3

.
0

.
3

.
0

.
5

.
0

.
7

.
1

.
9

.
1

max.

Peeling strengh (0.1

0.7N)

Cover film

Part number marked side is always facing up.
The feeding holes side of cavity tape is always input terminal.

User Direction of Feed

3.0

0.1

4.0

0.1

1.5

0.1

0.0

2.0

0.05

4.0

0.1

(in mm)

max.

Chip Filter

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

109

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 10.7MHz Lead Type SF_LA Series

(in mm)

Lead length under the hold down tape

Length of cut off

Pitch of components

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing (I)

Lead spacing (II)

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Gap of hold down tape and carrier tape

Distance between the center of sprocket
hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Item

Code

Dimensions

Tolerance

Remarks

3.0 min.

2.0 max.

12.7

3.85

6.35

5.0

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

To distinguish the direction

Hold down tape doesn't exceed
the carrier tape

The pitch of 20 sprocket holes

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

+0.5

0.2

+0.5

dh dh

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

110

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 4.5-6.5MHz Chip Type SFSKA Series

User direction of feed

Chip filter

Cover film

Peeling strength
(0.1--0.7N)

+0.1

0.0

.
1

.
0

ш1.5

2.0

0.1 4.0

0.1

.
7

.
1

.
5

.
1

.
0

.
2

.
3

.
1

.
3

.
0

.
1

4.3

0.1

3° max.

10° max.

8.0

0.1

Part Number marked side is always facing up.

21.5

0.5

(
ш

)

(
ш

)

17.5

1.5

Empty

240-280 min.

400-560

40-190

Components

Empty

Trailer

Leader
Cover Film

2.2

0.5

ш13.0

0.2

(in mm)

Dimensions of carrier tape

Dimensions of Reel

+0.1

0.0

ш1.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

111

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 4.5-6.5MHz Lead Type SFSRA Series

(in mm)

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to
component center

Lead spacing (I)

Lead spacing (II)

Slant to the forward or backward

Width of carrier tape

Width of hold down tape

Position of Sprocket hole

Gap of hold down tape and carrier Tape

Distance between the center of
sprocket hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Body tilt

Item

Code

Dimensions

Tolerance

Remarks

5.0 min.

12.7

3.85

6.35

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

1.0

Tolerance for Pitches 10

=127

Hold down tape doesn't exceed the carrier tape.

The pitch of 20 sprocket holes

Direction Feed

dh dh

+0.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

112

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 455kHz Chip Type PFWCC Series

.
0

.
3

.
5

.
1

.
7

.
1

max.

10° max.

Cap Chip

4.0

0.1

2.0

0.1

ш1.55

0.1

8.0

0.1

5.4

0.1

Peeling strength

(0.1--0.7N)

Cover film

User direction of feed

.
3

(
0

.
0

)

.
1

(
3

.
6

.
)

Part Number marked side is always facing up.

ш13.0

0.5

(
ш

)

2.0

14.0

1.5

20.5 max.

(in mm)

+0.5

-0.2

.
1

Dimensions of Carrier Tape

Dimensions of Reel

s CERAFILr 455kHz Chip Type SFPCA Series

Dimensions of Carrier Tape

User direction of feed

12.0

0.1

.
0

.
2

.
8

.
1

.
5

.
1

.
7

.
1

4.0

0.1

2.0

0.1

5.3

0.1

Ш1.5

7.4

0.1

+0.1

-0

Cover film

(in mm)

Dimensions of Reel

Label

Ш13.0

0.2

2.2

0.5

21.5

1.5

(
Ш

)

(
Ш

)

240~280

400~560

40~200

17.5

1.0

Empty

Components

Cover Film

Empty

Trailer

Leader

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

113

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 455kHz Lead Type PFSLA/PFWLA Series

(in mm)

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (1)

Length from hole center to lead

Length from hole center to
component center

Lead spacing (1)

Lead spacing (2)

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Gap of hold down tape and carrier tape

Distance between the center of
sprocket hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (2)

Item

Code

Dimensions

Note

3.0 min.

12.7

3.85

6.35

5.0

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

Tolerance

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

Hold-down tape doesn't exceed the carrier tape.

The pitch of 20 sprocket holes

dh dh

0.5

0.2

0.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

114

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 455kHz Lead Type SFULA Series
Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFIL

, with the

marking of products all facing toward the "muRata" mark on

a magazine, and be closed with exclusive stoppers at both

ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35

CERAFIL

should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note : Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Dimensions of Magazine Cassette

Material : Polycarbonate

Camber of Case :

1mm max. against entire length (reference)

Twist of Case :

0.5mm max. (reference)

in mm

Tolerance unless otherwise specified :

0.2

5.6

0.3

.
7

.
3

.
1

.
3

4.2

0.25

1.1 1.1

+0
2

390

s CERAFILr 455kHz Lead Type SFZLA Series
Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFIL

, with the

marking of products all facing toward the "muRata" mark on

a magazine, and be closed with exclusive stoppers at both

ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35

CERAFIL

should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note : Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Dimensions of Magazine Cassette

Material : Polycarbonate

Camber of Case :

1mm max. against entire length (reference)

Twist of Case :

0.5mm max. (reference)

in mm

Tolerance unless otherwise specified :

0.2

1.1

7.6

0.25

9.0

0.3

.
7

.
3

.
0

.
3

.
1

.
3

+0
2

390

s CERAFILr 455kHz Lead Type SFPLA Series
Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFIL

, which

ground terminals are all facing toward the "muRata" mark on

a magazine, and be closed with exclusive stoppers at the

both ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35

CERAFIL

should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note : Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Dimensions of Magazine Cassette

Material : Polycarbonate

Camber of Case :

1mm max. against entire length (reference)

Twist of Case :

0.5mm max. (reference)

in mm

Tolerance unless otherwise specified :

0.2

HP51M0003-02

405

1.0

9.0

0.3

7.6

0.25

.
7

.
3

.
1

.
3

1.1

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

115

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s CERAFILr 455kHz Lead Type CFWLA Series
Standard of Magazine Cassette

1. Putting CERAFILr into Magazine

A magazine should contain 50pcs of CERAFIL

, with

ground terminals all facing toward the "muRata" mark on a

magazine, and be closed with exclusive stoppers at the both

ends. Above should be the minimum packaging unit.

2. Quality of Magazine

(1) Transparent so that input / output direction is visually

recognizable.

(2) With an angle of 35

CERAFIL

should slip down

smoothly.

(3) Antistatic finish

(4) Recycling

Note : Magazines should be sent back for recycling.

(Therefore, empty magazines should not be damaged.)

3. Magazine should be packaged in a cardboard box.

MURATA model name, quantity and outgoing inspection

number should be indicated on the box.

Cardboard box may contain maximum 33 magazines (1,650

pieces of filter).

4. Dimensions of Magazine Cassette

Material : Polycarbonate

Camber of Case :

1mm max. against entire length (reference)

Twist of Case :

0.5mm max. (reference)

in mm

Tolerance unless otherwise specified :

0.2

muRataHP51M0064

576.0

2.0

9.0

0.3

7.3

0.25

.
5

.
3

.
7

.
3

.
0

.
3

ANTISTATIC

5.3

0.3

0.6

s Ceramic Trap 4.5-6.5MHz Chip Type TPSKA Series

User direction of feed

Chip filter

Cover film

Peeling strength
(0.1--0.7N)

+0.1

0.0

.
1

.
0

ш1.5

2.0

0.1 4.0

0.1

.
7

.
1

.
5

.
1

.
0

.
2

.
3

.
1

.
3

.
0

.
1

4.3

0.1

3° max.

10° max.

8.0

0.1

Part Number marked side is always facing up.

21.5

0.5

(
ш

)

(
ш

)

17.5

1.5

Empty

240-280 min.

400-560

40-190

Components

Empty

Trailer

Leader
Cover Film

2.2

0.5

ш13.0

0.2

(in mm)

Dimensions of carrier tape

Dimensions of Reel

+0.1

0.0

ш1.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

116

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Trap 4.5-6.5MHz Chip Type TPWKA Series

+0.1

0.0

ш1.5

+0.1

0.0

ш1.5

.
1

.
0

.
7

Part Number marked side is always facing up.

21.5

0.5

(
ш

)

(
ш

)

17.5

1.5

Empty

240-280 min.

400-560

40-190

Components

Empty

Trailer

Leader
Cover Film

2.2

0.5

ш13.0

0.2

(in mm)

Dimensions of carrier tape

Dimensions of Reel

2.0

0.1

5.5

0.1

8.0

0.1

4.0

0.1

.
7

.
1

.
0

.
2

.
5

.
1

.
0

.
1

.
3

.
0

.
9

.
1

Chip filter

3° max.

10° max.

peeling strength
(0.1--0.7N)

Cover film

User direction of feed

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

117

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Trap 4.5-6.5MHz Lead Type TPSRA Series

(in mm)

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to
component center

Lead spacing (I)

Lead spacing (II)

Slant to the forward or backward

Width of carrier tape

Width of hold down tape

Position of Sprocket hole

Gap of hold down tape and carrier Tape

Distance between the center of
sprocket hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Body tilt

Item

Code

Dimensions

Tolerance

Remarks

5.0 min.

12.7

3.85

6.35

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

1.0

Tolerance for Pitches 10

=127

Hold down tape doesn't exceed the carrier tape.

The pitch of 20 sprocket holes

Direction Feed

dh dh

+0.5

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

118

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Trap 3.5-6.5MHz Lead Type TPSRD Series

(in mm)

Hold down tape doesn't exceed the carrier tape

The pitch of 20 sprocket holes

Item

Code

Dimensions

Tolerance

Remarks

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Po20

3.0 min.

12.7

3.85

6.35

5.0

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

------

0.5

0.2

0.5

1.0

0.5

------

0.5

0.2

1.5

+0.5

-0.0

+0.5

-0.2

dh dh

Gap of hold down tape and
carrier tape

Distance between the center of
sprocket hole and lead stopper

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

119

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Trap 3.5-6.5MHz Lead Type TPSRD_W/TPWRD/TPTRD Series

(in mm)

Lead length under the hold down tape

Length of cut off

Pitch of components

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing (I)

Lead spacing (II)

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Gap of hold down tape and carrier tape

Distance between the center of sprocket
hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Item

Code

Dimensions

Tolerance

Remarks

3.0 min.

2.0 max.

12.7

3.85

6.35

5.0

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

To distinguish the direction

Hold down tape doesn't exceed
the carrier tape

The pitch of 20 sprocket holes

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

+0.5

0.2

+0.5

dh dh

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

120

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Discriminator 10.7MHz Chip Type CDSCB Series

(in mm)

4.0

0.1

Cover film

4.0

0.1

2.0

0.05

.
0

.
2

(
9

.
0

)

ш1.5

+0.1

-0

ш1.5

+0.1

-0

.
5

.
0

.
7

.
1

.
7

.
1

Direction of feed

Part number marked side is always facing up.

.
3

.
0

(
1

.
7

.
)

.
1

3°max.

2.2

0.1

Peeling strength
0.1-0.7N

10°

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

121

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Discriminator 10.7MHz Lead Type CDALA Series

(in mm)

Hold down tape doesn't exceed the carrier tape

The pitch of 20 sprocket holes

Item

Code

Dimensions

Tolerance

Remarks

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Po20

3.0 min.

12.7

3.85

6.35

5.0

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

------

0.5

0.2

0.5

1.0

0.5

------

0.5

0.2

1.5

+0.5

-0.0

+0.5

-0.2

dh dh

Gap of hold down tape and
carrier tape

Distance between the center of
sprocket hole and lead stopper

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

122

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Discriminator 3.5-6.5MHz CDSRH_EK Series

(in mm)

Hold down tape doesn't exceed the carrier tape

The pitch of 20 sprocket holes

Item

Code

Dimensions

Tolerance

Remarks

Lead length under the hold down tape

Pitch of component

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Po20

3.0 min.

12.7

3.85

6.35

5.0

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

------

0.5

0.2

0.5

1.0

0.5

------

0.5

0.2

1.5

+0.5

-0.0

+0.5

-0.2

dh dh

Gap of hold down tape and
carrier tape

Distance between the center of
sprocket hole and lead stopper

Continued on the following page.

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Packaging

123

Note

· Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

Continued from the preceding page.

s Ceramic Discriminator 3.5-6.5MHz CDSRH_CK Series

(in mm)

Lead length under the hold down tape

Length of cut off

Pitch of components

Pitch of sprocket hole (I)

Length from hole center to lead

Length from hole center to component center

Lead spacing (I)

Lead spacing (II)

Slant to the forward or backward

Slant to the left or right

Width of carrier tape

Width of hold down tape

Position of sprocket hole

Gap of hold down tape and carrier tape

Distance between the center of sprocket
hole and lead stopper

Diameter of sprocket hole

Total tape thickness

Pitch of sprocket hole (II)

Item

Code

Dimensions

Tolerance

Remarks

3.0 min.

2.0 max.

12.7

3.85

6.35

5.0

2.5

18.0

6.0 min.

9.0

18.0

ш4.0

0.6

254.0

To distinguish the direction

Hold down tape doesn't exceed
the carrier tape

The pitch of 20 sprocket holes

0.5

0.2

0.5

0.2

1.0

0.5

0.2

1.5

+0.5

0.2

+0.5

dh dh

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Head Office

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111

International Division

3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp

http://www.murata.com/

Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.

Note

P50E.pdf 03.4.16

Note:

1. Export Control

For customers outside Japan

Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.

For customers in Japan

For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required
for export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially

high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.

Aircraft equipment

Aerospace equipment

Undersea equipment

Power plant equipment

Medical equipment

Transportation equipment (vehicles, trains, ships, etc.)

Traffic signal equipment

Disaster prevention / crime prevention equipment

Data-processing equipment

Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice.

Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.

4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or

transact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect

of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

РР»РµРєС‚СЂРѕРЅРЅС‹Р№ РєРѕРјРїРѕРЅРµРЅС‚: CDALA10

Document Outline

Р­Р»РµРєС‚СЂРѕРЅРЅС‹Р№ РєРѕРјРїРѕРЅРµРЅС‚: CDALA10

Document Outline

РР»РµРєС‚СЂРѕРЅРЅС‹Р№ РєРѕРјРїРѕРЅРµРЅС‚: CDALA10