Part Numbering

Applications and Data of SAW Resonator

SARCC Series

Oscillation Circuit

Actual measurments of SAW Oscillator

Keyless Entry System

Packaging/Notice

CONTENTS

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

· This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact the approval sheet for product specification before ordering.

Recycled Paper

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

qProduct ID

wFunction

eStructure/Size

rResonant Frequency

tDesign

uResonant Frequency Tolerance

SAW Resonators

SAW

Resonator

Package (SC33 package)

1 port

Crystal

Structure/Size

Resonant Frequency Tolerance

Product ID

Code

yBoard

Code

Function

Design

Board

Code

(Global Part Number)

50kHz

75kHz

100kHz

iCustomer Code

2000pcs. /ø178mm Reel

5000pcs. /ø330mm Reel

oPackaging

R12

R05

Code

Packaging

Expressed by a figure.

Expressed by six-digit alphanumerics. The unit is in hertz (Hz). A
decimal point is expressed by the capital letter "

433M92

R05

Part Numbering

The structure of the "Global Part Numbers" that have been adopted since June 2001 and the meaning of each code are described herein.
If you have any questions about details, inquire at your usual Murata sales office or distributor.

(

)

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Applications and Data of SAW Resonator

s Application

s Basic structure of 1-port SAW RESONATOR

s Test Circuit

s Transmission Characteristics of 1-port SAW RESONATOR

SAW RESONATER has generally 2 types of 1-port type and

2-port type.

1-port SAW RESONATOR is basically a 2 terminal device

and its application is similar to that of quartz bulk wave

resonator or ceramic resonator. Most of the application

circuit is Colpitts or similar type that can be made with low

cost. 1-port SAW RESONATOR is also applicable to VCO

(Voltage Controlled Oscillator) application.

2-port SAW RESONATOR is a kind of very narrow, low loss

band-pass filter. Oscillation circuit is mostly like a RF

amplifier with feedback loop.

SARCC series is 1-port SAW RESONATOR. Later

application data is oscillation circuit by 1-port SAW

RESONATOR.

1-port SAW RESONATOR has one IDT (Inter Digital

Transducer), which generates and receives SAW, and two

grating reflectors, which reflect SAW and generate a

standing wave between the two reflectors. IDT and

reflectors are fabricated on quartz crystal substrate by

photolithographic process. Cut angle of the substrate shall

be selected carefully. SAW RESONATOR chip is

encapsuled in a ceramic package.

Continued on the following page.

SARCC315M00BXM0

SARCC433M92BXM0

SAW

IDT

REFLECTOR

RF
Voltmeter
V1

S.S.G.

Frequency (MHz)

Phase

5 dB/cm

Amplitude

I
n

r
t
i
o

(
d

)

314.50

180

314.70

314.90

315.10

315.30

315.50

(
d

)

180

Frequency (MHz)

Phase

5 dB/cm

Amplitude

I
n

r
t
i
o

(
d

)

(
d

)

433.42

433.62

433.82

434.02

434.22

434.42

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Applications and Data of SAW Resonator

s Temperature Characteristics of 1-port SAW RESONATOR

Continued from the preceding page.

-200

-150

-100

-50

-60

-40

-20

100

120

Temperature (°C)

r
e

r
i
f
t

(
p

)

-200

-150

-100

-50

-60

-40

-20

100

120

Temperature (°C)

r
e

r
i
f
t

(
p

)

SARCC315M00BXM0

SARCC433M92BXM0

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

SAW Resonators

SARCC Series

SAW Resonator utilizes Surface acoustic Wave, and is

able to be applied to high frequency circuit where

conventional crystal, ceramic resonators are not

available, as SAW Resonator oscillates stably with its

fundamental mode over frequency range from 50 MHz to

around 1 GHz.

Murata SAW Resonator - SARCC series - has high

stability, good temperature characteristics provided

by quartz crystal substrate and is developed with SAW

technology accumulated for SAW filters through

Murata's long experience.

SAW Resonator can be applied to many types of high

frequency devices including RF remote controls,

CATV FSK demodulators and CATV 2nd local oscillators.

s Features

1. High Oscillation Frequency Stability

Both initial tolerance and temperature coefficient

of oscillating frequency of SAW Resonator are

between quartz bulk resonator's and LC's / RC's.

Temperature coefficient of oscillating frequency

for quartz crystal :

10**-6/degree C, LC : 10**-3-10**-4/dgree C,

while SAW Resonator : 5x10**-6/dgree C.

(The number following ** means multiplier.)

2. Adjustment Free

As SAW Resonator utilizes mechanical vibration of

piezoelectric material, while LC/RC utilizes

electrical resonance, oscillator using

SAW Resonator is stable against peripheral circuit

or supply voltage fluctuation, and is basically

free from adjustment.

3. Simple/Low Cost Circuit by Fundamental Oscillation

Multiplying circuit necessary for quartz bulk wave

resonator is not required as SAW Resonator

oscillates with its fundamental mode over the

frequency range of 50 MHz to 1 GHz. Therefore,

oscillation circuit is simple and low cost.

4. Quartz Crystal Substrate

SARCC series realizes better temperature

characteristics, higher stability against

peripheral circuit, by utilizing quartz crystal

substrate, compared to SAW Resonators with other

materials.

5. Small Size Package

SARCC series use small size ceramic package with

3.0x3.0x1.15mm. This is good for high density mount.

6. They can be applied Corpitts Oscillator circuit.

7. Components do not contain lead.

(1)

(2)

(3)

(4)

(5)

(6)

0.75

0.20

1.50

0.20

5-0.75

0.20

0.75

0.10

6-0.60

0.15

0.4

0.1

1.15max.

4-1.50

0.15

3.0

0.2

3.0

0.2

Dot Marking(ø0.5)

Input
Ground

(2)(5) :

Others :

(in mm)

Laser Printing
EIAJ Code

Marking :

(0.20)

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Part Number

Resonant Loss

(dB)

Resonant Frequency

(MHz)

Parallel Capacitance (at 1MHz)

(pF)

SARCC304M30BXL0

2.2 max.

304.300

2.4

SARCC304M30BXM0

2.2 max.

304.300

2.4

SARCC304M30BXP0

2.2 max.

304.300

2.4

SARCC315M00BXL0

2.2 max.

315.000

2.4

SARCC315M00BXM0

2.2 max.

315.000

2.4

SARCC315M00BXP0

2.2 max.

315.000

2.4

SARCC423M22BXL0

2.5 max.

423.220

2.1

SARCC423M22BXM0

2.5 max.

423.220

2.1

SARCC423M22BXP0

2.5 max.

423.220

2.1

SARCC433M87BXL0

2.5 max.

433.870

2.1

SARCC433M87BXM0

2.5 max.

433.870

2.1

SARCC433M87BXP0

2.5 max.

433.870

2.1

SARCC433M92BXL0

2.5 max.

433.920

2.1

SARCC433M92BXM0

2.5 max.

433.920

2.1

SARCC433M92BXP0

2.5 max.

433.920

2.1

SARCC434M15BXL0

2.5 max.

434.150

2.1

SARCC434M15BXM0

2.5 max.

434.150

2.1

SARCC434M15BXP0

2.5 max.

434.150

2.1

Operating Temperature Range: -40 to +85 dgree C, Storage Temperature Range: -40 to +85 dgree C.

s Equivalent Circuit

L1 (

Part Number

164.495

159.331

110.088

92.747

96.529

95.288

C1 (pF)

0.001663

0.001602

0.001284

0.001451

0.001394

0.00141

R1 (

)

22.0

22.2

20.2

22.1

20.0

C0 (pF)

2.37

2.25

2.00

2.112

1.97

SARCC304M30BX_0

SARCC315M00BX_0

SARCC423M22BX_0

SARCC433M87BX_0

SARCC433M92BX_0

SARCC434M15BX_0

s Recommended Land Pattern

2.0

(in mm)

.
7

.
6

.
7

1.4

4.0

.
2

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Oscillation Circuit

s Theory of Oscillation Circuit

Oscillation circuits using LC or quartz crystal are called

'Feedback Oscillators'. Feedback oscillator consists of an

amplifier and a feedback circuit.

The circuit oscillates, with no input signal applied from

outside of the oscillator, when feedback signal from the

output of the amplifier has the same amplitude and phase to

the input signal. The conditions required to the feedback to

enable oscillation are as follows;

Amplitude : G =

0 [dB]

Phase :

1 +

2 = 360 x n [degree]

(n: Natural number)

Colpitts is one of the popular oscillation circuits. Basic

structure of Colpitts oscillator is as shown in Fig.2. The

oscillating frequency is approximately same to resonant

frequency of L, CL1 and CL2.

fosc = 1 / (2

( L x CL1 x CL2 / ( CL1 + CL2 ))

1/2

)

1-port SAW RESONATOR is a kind of two terminal resonant

device utilizing piezoelectricity, like quartz crystal bulk wave

resonator or ceramic resonator. The equivalent circuit of

1-port SAW RESONATOR is same to that of quartz or

ceramic resonator, and therefore, impedance characteristics

of SAW RESONATOR is as shown in Fig.1.

Continued on the following page.

1. Fig. 1 Impedance Characteristics of 1-port SAW RESONATOR

2. Basic Structure of Corpitts Oscillator

Fig. 2. Corpitts Oscillator Circuit.

SARCC315M00BXM0

SARCC433M92BXM0

Amplifier

Gain:

Phase delay:

Feedback Circuit

Gain:

Phase delay:

CL1

CL2

CENTER 315.000 000 MHz

SPAN 1.000 000MHz

Cor

Hid

Cor

Hid

CENTER 433.920 000 MHz

SPAN 1.000 000MHz

Cor

Hid

Cor

Hid

Oscillation Circuit

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Oscillation Circuit

In the case of an oscillation circuit using piezo resonator, the

inductor in Fig.2 can be replaced by the resonator because

its impedance is inductive between fr (impedance minimum)

and fa (impedance maximum) as shown in Fig.1.

Fig.3 shows an example of oscillation circuit using 1-port

SAW RESONATOR. Rb1 and Rb2 are for DC bias. Re is a

load impedance. Cd is for power line de-coupling. CL1 and

CL2 are load capacitance to satisfy oscillation conditions.

Values of CL1 and CL2 must be evaluated to get desired

oscillating frequency.

Transistor shall be a high frequency type - fT a few GHz or

more.

SMT type transistor, resistor, capacitor are recommended

for application more than 100 MHz due to the inductance of

the lead terminals.

Continued from the preceding page.

3. Example of 1-port SAW Oscillator

Fig. 3. 1-port SAW Oscillator Circuit

Vcc

SAW

Rb2

Rb1

CL1

CL2

Out

Oscillation Circuit

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

s 315 MHz 1-port SAW Oscillator

Fig.4 shows an example of oscillator with 1-port SAW

RESONATOR. Here, transistor is 2SC4228(NEC), SAW

RESONATOR is SARCC315M00BXL0 (315.00 MHz

resonator).

Supply voltage (Vcc) characteristics and temperature

characteristics are shown in Fig.6. CL1, CL2, Co and Re

characteristics are shown in Fig. 7 ti Fig. 10.

Tr: 2SC4228

SAW: SARCC315M00BXL0

Rb1=Rb2=2k

Re=160

CL1=12pF GRM18821CH120JA01B

CL2=8pF GRM1882C2D8RDV01B

Co=2pF GRM1884C1H2R0CZ01B

Continued on the following page.

1. Fig. 6 Vcc Characteristics

Fig. 5 Land Pattern

Fig. 4 Oscilltor Circuit

25mm

CL2

CL1

SAW

Rb1

Rb2

Vcc

Output

Vcc

SAW

Rb2

Rb1

CL1

CL2

Out

314.940

314.960

314.980

315.000

315.020

Vc (V)

f
0

(
M

)

-40

-25

-20

-15

-10

-5

Vc (V)

(
d

)

-40

I
c

(
m

)

-40

200

400

600

800

1000

t

(
u

)

-40

85ºC

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

Continued on the following page.

2. Fig. 7 CL1 Characteristics

3. Fig. 8 CL2 Characteristics

Continued from the preceding page.

315.000

315.005

315.010

315.015

315.020

315.025

315.030

CL1 (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

CL1 (pF)

(
d

)

CL1 (pF)

I
c

(
m

)

500

1000

1500

2000

CL1 (pF)

t

(
u

)

315.000

315.005

315.010

315.015

315.020

315.025

315.030

CL2 (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

CL2 (pF)

(
d

)

CL2 (pF)

I
c

(
m

)

500

1000

1500

2000

CL2 (pF)

t

(
u

)

Frequency

Output Power

Current Consumption

Rise Time

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

Continued on the following page.

4. Fig. 9 Co Characteristics

5. Fig. 10 Re Characteristics

Continued from the preceding page.

315.000

315.005

315.010

315.015

315.020

315.025

315.030

Co (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

Co (pF)

(
d

)

Co (pF)

I
c

(
m

)

500

1000

1500

2000

Co (pF)

t

(
u

)

315.000

315.005

315.010

315.015

315.020

315.025

315.030

150

200

250

Re (ohm)

f
0

(
M

)

-30

-25

-20

-15

-10

100

150

200

250

Re (ohm)

(
d

)

100

150

200

250

Re (ohm)

I
c

(
m

)

500

1000

1500

2000

100

150

200

250

Re (ohm)

t

(
u

)

Frequency

Output Power

Current Consumption

Rise Time

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

s 433.92 MHz 1-port SAW Oscillator

Fig. 11 shows an example of oscillator with 1-port SAW

RESONATOR. Here, transistor is 2SC4228(NEC), SAW

RESONATOR is SARCC433M92BXM0 (433.92 MHz

resonator).

Supply voltage (Vcc) characteristics and temperature

characteristics are shown in Fig. 13.

Tr: 2SC4228

SAW: SARCC433M92BXM0

Rb1=Rb2=2k

Re=160

CL1=10pF GRM1882C1H100JA01B

CL2=8pF GRM1882C1H8RD201B

Co=2pF GRM1884C1H2R0CZ01B

Continued on the following page.

1. Fig. 13 Vcc Characteristics

Fig. 12 Land Pattern

Fig. 11 Oscillator Circuit

Continued from the preceding page.

25mm

CL2

CL1

SAW

Rb1

Rb2

Vcc

Output

Vcc

SAW

Rb2

Rb1

CL1

CL2

Out

433.800

433.850

433.900

433.950

434.000

434.050

434.100

Vc (V)

f
0

(
M

)

-40

-35

-20

-15

-30

-25

-10

-5

Vc (V)

(
d

)

-40

Vc (V)

I
c

(
m

)

-40

100

200

300

400

500

Vc (V)

t

(
u

)

-40

85ºC

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

Continued on the following page.

2. Fig. 14 CL1 Characteristics

3. Fig. 15 CL2 Characteristics

Continued from the preceding page.

434.010

434.015

434.020

434.025

434.030

434.035

434.040

CL1 (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

CL1 (pF)

(
d

)

CL1 (pF)

I
c

(
m

)

400

200

600

800

1000

CL1 (pF)

t

(
u

)

434.000

434.005

434.010

434.015

434.020

434.025

434.030

CL2 (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

CL2 (pF)

(
d

)

CL2 (pF)

I
c

(
m

)

400

200

600

800

1000

CL2 (pF)

t

(
u

)

Frequency

Output Power

Current Consumption

Rise Time

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Actual Measurements of SAW Oscillator

4. Fig. 16 Co Characteristics

5. Fig. 17 Re Characteristics

Continued from the preceding page.

434.000

434.005

434.010

434.015

434.020

434.025

434.030

Co (pF)

f
0

(
M

)

-30

-25

-20

-15

-10

Co (pF)

(
d

)

Co (pF)

I
c

(
m

)

400

200

600

800

1000

Co (pF)

t

(
u

)

434.000

434.005

434.010

434.015

434.020

434.025

434.030

150

200

250

Re (ohm)

f
0

(
M

)

-30

-25

-20

-15

-10

100

150

200

250

Re (ohm)

(
d

)

100

150

200

250

Re (ohm)

I
c

(
m

)

400

200

600

800

1000

100

150

200

250

Re (ohm)

t

(
u

)

Frequency

Output Power

Current Consumption

Rise Time

Frequency

Output Power

Current Consumption

Rise Time

Actual measurments of SAW Oscillator

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Keyless Entry System

Encoder

Oscillator

SAW Resonator
(433.92MHz etc)

SAW Filter

Oscillator

SAW Resonator
(423.22MHz etc)

DEMOD

LNA

IF Filter

LNA

RF remote control transmitter and reciver for automotive

security device is getting popular. MURATA SARCC series

are suitable for this application due to the advantage of

adjustment-free (or easy adjustment) and high stability.

Example of application circuit is shown in Fig.18 and Fig.19.

Fig. 18 Transmitter Circuit

Fig. 19 Receiver Circuit

Keyless Entry System

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Packaging/Notice

Note

· Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

(in mm)

ø178 Reel Dimension

ø330 Reel Dimension

13.0

0.5

2.0

0.5

(
ø

)

(
ø

)

ø13.0

0.5

2.0

0.5

ø13.0

0.5

17.5 max.

13.5

1.0

(
ø

)

(
ø

)

19.5 max.

max.

2.0

0.1

Cover Tape

4.0

0.1

0.30

0.05

1.25

0.10

.
7

.
1

.
5

.
1

.
3

.
1

.
0

.
2

3.3

0.1

Direction of Feed

4.0

0.1

ø1.5

-0.0

+0.1

ø1.5

-0.0

+0.1

s Notice (Handling)

1. Mount this component at the position so that stress

by warp or bend of the PCB may not apply to it.

2. It might be a cause of destruction to apply

excessive shock on mounting this component on PCB

when positioning claw, pick-up nozzle, etc of

component placement machine are abraded. Keep

regular maintenance which is instructed on each

machine to prevent from these kinds of troubles.

3. Mount all terminals, or terminal strength might be

degraded.

4. Face this component to PCB.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Head Office

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111

International Division

3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp

http://www.murata.com/

Note:

1. Export Control

For customers outside Japan

Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.

For customers in Japan

For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required
for export.

2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require

especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one
of our products for other applications than specified in this catalog.

Aircraft equipment

Aerospace equipment

Undersea equipment

Power plant equipment

Medical equipment

Transportation equipment (vehicles, trains, ships, etc.)

Traffic signal equipment

Disaster prevention / crime prevention equipment

Data-processing equipment

Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of May 2002. They are subject to change or our products in it may be discontinued without advance notice. Please

check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.

4. Please read rating and CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specification or transact

the approval sheet for product specification before ordering.

6. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product

specification or to transact the approval sheet for product specification, before ordering.

7. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect

of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.

8. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

Please read rating and

CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specification or to transact the approval sheet for product specificaion before ordering.

Note

P36E.pdf 02.8.5

Document Outline

Ð­Ð»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: SARCC433M92BXL0

Document Outline

ÐÐ»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: SARCC433M92BXL0