LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R - SEPTEMBER 1975 - REVISED JANUARY 2005

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

2-kV ESD Protection for:
- LM224K, LM224KA
- LM324K, LM324KA
- LM2902K, LM2902KV, LM2902KAV

Wide Supply Ranges
- Single Supply . . . 3 V to 32 V

(26 V for LM2902)

- Dual Supplies . . .

1.5 V to

16 V

(

13 V for LM2902)

Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ

Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground

Low Input Bias and Offset Parameters
- Input Offset Voltage . . . 3 mV Typ

A Versions . . . 2 mV Typ

- Input Offset Current . . . 2 nA Typ
- Input Bias Current . . . 20 nA Typ

A Versions . . . 15 nA Typ

Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . 32 V
(26 V for LM2902)

Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ

Internal Frequency Compensation

description/ordering information

These devices consist of four independent
high-gain frequency-compensated operational
amplifiers that are designed specifically to operate
from a single supply over a wide range of voltages.
Operation from split supplies also is possible if the
difference between the two supplies is 3 V to 32 V
(3 V to 26 V for the LM2902), and V

is at least

1.5 V more positive than the input common-mode
voltage. The low supply-current drain is
independent of the magnitude of the supply
voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional
operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For
example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and
provides the required interface electronics, without requiring additional

15-V supplies.

2004, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

1OUT

1IN-

1IN+

2IN+

2IN-

2OUT

4OUT
4IN-
4IN+
GND
3IN+
3IN-
3OUT

LM124 . . . D, J, OR W PACKAGE

LM124A . . . J PACKAGE

LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE

LM324, LM324K . . . D, N, NS, OR PW PACKAGE

LM324A . . . D, DB, N, NS, OR PW PACKAGE

LM324KA . . . D, N, NS, OR PW PACKAGE

LM2902 . . . D, N, NS, OR PW PACKAGE

LM2902K . . . D, DB, N, NS, OR PW PACKAGE

LM2902KV, LM2902KAV . . . D OR PW PACKAGE

(TOP VIEW)

1 20 19

9 10 11 12 13

4IN+
NC
GND
NC
3IN+

1IN+

2IN+

LM124, LM124A . . . FK PACKAGE

(TOP VIEW)

1IN-

1OUT

3IN-

4IN-

2IN-

2OUT

NC - No internal connection

3OUT

4OUT

On products compliant to MIL PRF 38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R - SEPTEMBER 1975 - REVISED JANUARY 2005

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

description/ordering information (continued)

ORDERING INFORMATION

VIOmax
AT 25

MAX

TESTED

VCC

PACKAGE

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP (N)

Tube of 25

LM324N

PDIP (N)

Tube of 25

LM324KN

Tube of 50

LM324D

LM324

SOIC (D)

Reel of 2500

LM324DR

LM324

SOIC (D)

Tube of 50

LM324KD

LM324K

Reel of 2500

LM324KDR

LM324K

7 mV

30 V

Reel of 2000

LM324NSR

LM324

7 mV

30 V

SOP (NS)

Tube of 50

LM324KNS

LM324K

SOP (NS)

Reel of 2000

LM324KNSR

LM324K

Tube of 90

LM324PW

L324

TSSOP (PW)

Reel of 2000

LM324PWR

L324

TSSOP (PW)

Tube of 90

LM324KPW

L324K

Reel of 2000

LM324KPWR

L324K

C to 70

PDIP (N)

Tube of 25

LM324AN

0 C to 70 C

PDIP (N)

Tube of 25

LM324KAN

Tube of 50

LM324AD

LM324A

SOIC (D)

Reel of 2500

LM324ADR

LM324A

SOIC (D)

Tube of 50

LM324KAD

LM324KA

Reel of 2500

LM324KADR

LM324KA

3 mV

30 V

Reel of 2000

LM324ANSR

LM324A

3 mV

30 V

SOP (NS)

Tube of 50

LM324KANS

LM324KA

SOP (NS)

Reel of 2000

LM324KANSR

LM324KA

SSOP (DB)

Reel of 2000

LM324ADBR

LM324A

Tube of 90

LM324APW

L324A

TSSOP (PW)

Reel of 2000

LM324APWR

L324A

TSSOP (PW)

Tube of 90

LM324KAPW

L324KA

Reel of 2000

LM324KAPWR

L324KA

PDIP (N)

Tube of 25

LM224N

PDIP (N)

Tube of 25

LM224KN

5 mV

30 V

Tube of 50

LM224D

LM224

5 mV

30 V

SOIC (D)

Reel of 2500

LM224DR

LM224

SOIC (D)

Tube of 50

LM224KD

LM224K

-25

C to 85

Reel of 2500

LM224KDR

LM224K

-25

C to 85

PDIP (N)

Tube of 25

LM224AN

PDIP (N)

Tube of 25

LM224KAN

3 mV

30 V

Tube of 50

LM224AD

LM224A

3 mV

30 V

SOIC (D)

Reel of 2500

LM224ADR

LM224A

SOIC (D)

Tube of 50

LM224KAD

LM224KA

Reel of 2500

LM224KADR

LM224KA

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R - SEPTEMBER 1975 - REVISED JANUARY 2005

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

ORDERING INFORMATION (CONTINUED)

VIOmax
AT 25

MAX

TESTED

VCC

PACKAGE

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP (N)

Tube of 25

LM2902N

PDIP (N)

Tube of 25

LM2902KN

Tube of 50

LM2902D

LM2902

SOIC (D)

Reel of 2500

LM2902DR

LM2902

SOIC (D)

Tube of 50

LM2902KD

LM2902K

Reel of 2500

LM2902KDR

LM2902K

Reel of 2000

LM2902NSR

LM2902

26 V

SOP (NS)

Tube of 50

LM2902KNS

LM2902K

7 mV

26 V

SOP (NS)

Reel of 2000

LM2902KNSR

LM2902K

-40

C to 125

7 mV

SSOP (DB)

Tube of 80

LM2902KDB

L2902K

-40 C to 125 C

SSOP (DB)

Reel of 2000

LM2902KDBR

L2902K

Tube of 90

LM2902PW

L2902

TSSOP (PW)

Reel of 2000

LM2902PWR

L2902

TSSOP (PW)

Tube of 90

LM2902KPW

L2902K

Reel of 2000

LM2902KPWR

L2902K

32 V

SOIC (D)

Reel of 2500

LM2902KVQDR

L2902KV

32 V

TSSOP (PW)

Reel of 2000

LM2902KVQPWR

L2902KV

2 mV

32 V

SOIC (D)

Reel of 2500

LM2902KAVQDR

L2902KA

2 mV

32 V

TSSOP (PW)

Reel of 2000

LM2902KAVQPWR

L2902KA

CDIP (J)

Tube of 25

LM124J

CFP (W)

Tube of 25

LM124W

5 mV

30 V

LCCC (FK)

Tube of 55

LM124FK

-55

C to 125

5 mV

30 V

SOIC (D)

Tube of 50

LM124D

LM124

-55 C to 125 C

SOIC (D)

Reel of 2500

LM124DR

LM124

2 mV

30 V

CDIP (J)

Tube of 25

LM124AJ

2 mV

30 V

LCCC (FK)

Tube of 55

LM124AFK

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at

www.ti.com/sc/package.

symbol (each amplifier)

IN-

IN+

OUT

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R - SEPTEMBER 1975 - REVISED JANUARY 2005

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

schematic (each amplifier)

To Other
Amplifiers

Current

Regulator

VCC

OUT

GND

IN-

IN+

100-

Current
Regulator

50-

Current
Regulator

COMPONENT COUNT

(total device)

Epi-FET
Transistors
Diodes
Resistors
Capacitors

Current

Regulator

ESD protection cells - available on LM324K and LM324KA only

LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V,

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066R - SEPTEMBER 1975 - REVISED JANUARY 2005

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

LM2902

ALL OTHER

DEVICES

UNIT

Supply voltage, VCC (see Note 1)

13 or 26

16 or 32

Differential input voltage, VID (see Note 2)

Input voltage, VI (either input)

-0.3 to 26

-0.3 to 32

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25

VCC

15 V (see Note 3)

Unlimited

D package

DB package

Package thermal impedance,

JA (see Notes 4 and 5)

N package

C/W

Package thermal impedance,

JA (see Notes 4 and 5)

NS package

C/W

PW package

113

FK package

5.61

Package thermal impedance,

JC (see Notes 6 and 7)

J package

15.05

C/W

Package thermal impedance,

JC (see Notes 6 and 7)

W package

14.65

C/W

Operating virtual junction temperature, TJ

150

Case temperature for 60 seconds

FK package

260

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds

J or W package

300

Storage temperature range, Tstg

-65 to 150

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+, with respect to IN-.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max),

JA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) - TA)/

JA. Operating at the absolute maximum TJ of 150

C can affect reliability.

5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max),

JC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) - TC)/

JC. Operating at the absolute maximum TJ of 150

C can affect reliability.

7. The package thermal impedance is calculated in accordance with MIL-STD-883.

ESD protection

TEST CONDITIONS

TYP

UNIT

Human-Body Model

LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV

Ð­Ð»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: LM124

ÐÐ»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: LM124