s
MSM13R0000 SOG and MSM98R000 CSA
s
4
Oki Semiconductor
Delay Parameters (VDD = 3.3V, Tj = 25C)
From
To
LH/HL
tpd0'
(ns)
(ns/FO)
(ns/pf)
YB
YD
LH
1.658
0.021
0.582
HL
1.593
0.016
0.384
YBN
YD
LH
1.658
0.021
0.582
HL
1.593
0.016
0.384
GN
YD
LH
0.668
0.021
0.582
HL
1.230
0.016
0.378
YB
Y
LH
0.480
0.022
0.591
HL
1.033
0.032
0.767
YBN
YN
LH
0.480
0.022
0.591
HL
1.033
0.032
0.767
S = `0': Low Speed
From
To
LH/HL
tpd0'
(ns)
(ns/FO)
(ns/pf)
A
YB
LH
113.448
0.082
HL
112.385
0.071
AN
YBN
LH
121.419
0.082
HL
112.658
0.071
EB
YB
LZ
1.992
0.190
ZL
2.567
0.071
HZ
1.496
0.215
ZH
70.919
0.082
EB
YBN
LZ
2.516
0.190
ZL
2.798
0.071
HZ
2.562
0.215
ZH
67.373
0.082
GN
YB
LZ
1.853
0.190
ZL
2.127
0.071
HZ
1.335
0.215
ZH
93.127
0.082
GN
YBN
LZ
2.401
0.190
ZL
2.367
0.071
HZ
2.401
0.215
ZH
89.655
0.082
DC Parameters (VDD = core/(I/O) = 3.3/3.3 V0.3V, Tj = 0 to 85C)
Parameter
Value
Conditions
VDI
[1]
1.
VDI = Differential Input Sensitivity
0.2V
Vt+
2.0V
Vt-
0.8V
VOH
2.8V
15k
to GND
VOL
0.3V
1.5k
to 3.6V
BUD2SLL
Cell Count
4 I/O 2 PADs
S ='1': Full Speed
From
To
LH/HL
tpd0'
(ns)
(ns/FO)
(ns/pf)
A
YB
LH
4.550
0.608
HL
4.261
0.238
AN
YBN
LH
4.569
0.498
HL
4.246
0.237
EB
YB
LZ
1.191
0.152
ZL
4.774
0.149
HZ
3.193
0.165
ZH
1.221
0.068
EB
YBN
LZ
1.194
0.366
ZL
4.773
0.145
HZ
3.703
0.407
ZH
0.692
0.098
Power Dissipation (VDD = 3.3V, Tj = 25C)
S = `0': Low Speed Function
AC:
DC:
YB = VIH = 3.3V, YBN = VIL=0V
311.2 W
2940.4 W/MHz
1730.9 W (#2)
1353.8 W (#2)
0.0 W
YB = VOH
2.8V, YBN = VOL
0.3V
YB = VOL
0.3V, YBN = VOH
2.8V
when Power Down Mode (GN = 1) is used
S = `1': Full Speed Function
AC:
DC:
YB = VIH = 3.3V, YBN = VIL=0V
311.2 W
48.0 W/MHz
1009.4 W (#1)
723.4 W (#1)
0.0 W
YB = VOH
2.8V, YBN = VOL
0.3V
YB = VOL
0.3V, YBN = VOH
2.8V
when Power Down Mode (GN = 1) is used
Output Switching Parameters (VDD = 3.3 V, Tj = 25C)
Output
tr0
(ns)
r
(ns/pF)
tf0
(ns)
f
(ns/pf)
YB
#1
1.822
0.095
2.041
0.090
YBN
#1
1.491
0.105
1.821
0.087
YB
#2
79.749
0.106
77.070
0.055
YBN
#2
136.166
0.001
78.704
0.085
Notes: #1 = Full Speed Function
YB: RPD = 15k
, RPU = 1.5K
YBN: RPD = 15k
#2 = Low Speed Function
YB: RPD = 15k
YBN: RPD = 15k
, RPU = 1.5K
USB I/O Buffer with
Full Speed or Low Speed
Oki Semiconductor
The information contained herein can change without notice owing to product and/or technical improvements.
Please make sure before using the product that the information you are referring to is up-to-date.
The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action
and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in
the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect,
improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited
to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with
the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a
third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges,
including but not limited to operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office
automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for
use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application
where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such
applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including
life support and maintenance.
Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser
assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their
own expense, for export to another country.
Copyright 1998 Oki Semiconductor
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by
Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki
Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is
granted under any patents or patent rights of Oki.
s
MSM13R0000 SOG and MSM98R000 CSA
s
Northwest Area
785 N. Mary Avenue
Sunnyvale, CA 94086
Tel: 408/720-8940
Fax: 408/720-8965
Southwest Area
2302 Martin Street
Suite 250
Irvine, CA 92715
Tel: 714/752-1843
Fax: 714/752-2423
North Central Area
17177 N. Laurel Park Drive
Suite 433
Livonia, MI 48152
Tel: 313/464-7200
Fax: 313/464-1724
Northeast Area
138 River Road
Shattuck Office Center
Andover, MA 01810
Tel: 978/688-8687
Fax: 978/688-8896
Southeast Area
1590 Adamson Parkway
Suite 220
Morrow, GA 30260
Tel: 770/960-9660
Fax: 770/960-9682
Oki R
EGIONAL
S
ALES
O
FFICES
Corporate Headquarters
785 N. Mary Avenue
Sunnyvale, CA 94086-2909
Tel: 408/720-1900
Fax: 408/720-1918
Oki Stock No:
Oki FaxBack Service:
Call toll free 1-800-OKI-6994
Oki Web Site:
http://www.okisemi.com
320037-001 Appdx
PDF 
ZIP
