ChipFind - документация

Электронный компонент: D2SW-3L3HS

Скачать:  PDF   ZIP
1070
Snap Action Switch
D2SW
Snap Action Switch
D2SW
Watertight Miniature Snap Action Switch
High-quality watertight miniature snap action switch -- meets
IP67 (IEC 529) requirements (for lead wire types) and IP50
(for terminal types)
Monoblock construction assures high sealing capability and
is ideal for dusty places or where water is sprayed
Wide operating temperature range of -40C to 85C
Perfect for the automobile, agriculture machinery, automatic
vending machine, refrigerator, ice-manufacturing, bath equip-
ment, hot-water supply, air conditioner, and factory machine
industries, which require highly environment-resistive capa-
bilities
RoHS Compliant
Ordering Information
Note: 1.
The standard lengths of the lead wires (AWG22) of models incorporating them are 30 cm (12 in).
Actuator Terminal Model
Model 3 A
Model 0.1 A
Pin plunger
Solder terminals
D2SW-3HS
D2SW-01HS
Tab terminals (#110)
D2SW-3TS D2SW-01TS
PCB terminals
D2SW-3DS D2SW-01DS
With lead wires
D2SW-3MS D2SW-01MS
Hinge lever
Solder terminals
D2SW-3L1HS D2SW-01L1HS
Tab terminals (#110)
D2SW-3L1TS D2SW-01L1TS
PCB terminals
D2SW-3L1DS D2SW-01L1DS
With lead wires
D2SW-3L1MS D2SW-01L1MS
Simulated roller lever
Solder terminals
D2SW-3L3HS D2SW-01L3HS
Tab terminals (#110)
D2SW-3L3TS D2SW-01L3TS
PCB terminals
D2SW-3L3DS D2SW-01L3DS
With lead wires
D2SW-3L3MS D2SW-01L3MS
Hinge roller lever
Solder terminals
D2SW-3L2HS D2SW-01L2HS
Tab terminals (#110)
D2SW-3L2TS D2SW-01L2TS
PCB terminals
D2SW-3L2DS D2SW-01L2DS
With lead wires
D2SW-3L2MS D2SW-01L2MS
Snap Action Switch
D2SW
1071
Specifications
I
Characteristics
Note: 1.
Data shown are of initial value.
2.
The operating speed value shown is for pin plunger models. For hinge lever models, contact OMRON.
I
Operating Characteristics
D2SW-3 D2SW-01
Operating speed (see note 2)
0.1 mm to 1 m/second (at pin plunger)
Operating frequency
Mechanical
300 operations/min.
Electrical
60 operations/min.
Insulation resistance
100 M
min. (at 500 VDC)
Contact resistance
50 m
max. (initial value)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min. between
contacts of the same polarity
600 VAC, 50/60 Hz for 1 min. between con-
tacts of the same polarity
1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and
between each terminal and noncurrent-carrying metal part
Inrush current
NO
10 A
--
NC
20 A
--
Vibration resistance
Malfunction
10 to 55 Hz, 1.5 mm double amplitude
Shock resistance
Malfunction
300 m/s
2
(approx. 30 g)
Life expectancy
Mechanical
5,000,000 operations min.
Electrical
200,000 operations min.
(3 A at 125 VAC)
100,000 operations min.
(2 A at 250 VAC)
200,000 operations min.
Ambient temperature
Operating
-40 to 85C (with no icing)
Ambient humidity
Operating
95% max.
Enclosure rating
Reference to IP67 IEC 529 (lead wire type) and IP50 (terminal type)
Weight Terminal
model
2 g
Lead wire model
10 g
Characteristics
Part number
Terminal model
Lead wire model
D2SW-3
@
S
D2SW-01
@
S
D2SW-3L1
@
S
D2SW-01L1
@
S
D2SW-3L3
@
S
D2SW-01L3
@
S
D2SW-3L2
@
S
D2SW-01L2
@
S
D2SW-3MS
D2SW-01MS
OF max.
180 g
60 g
60 g
60 g
180 g
RF min.
30 g
6 g
6 g
6 g
30 g
PT max.
0.6
mm
-- -- -- 0.6
mm
OT min.
0.5
mm 1.0
mm 1.0
mm 1.0
mm 0.5
mm
MD max.
0.1
mm 0.8
mm 0.8
mm 0.8
mm 0.1
mm
FP max.
--
13.6 mm
15.5 mm
19.3 mm
--
OP
8.4
0.3 mm
8.8
0.8 mm
10.7
0.8 mm
14.5
0.8 mm
8.4
0.3 mm
1072
Snap Action Switch
D2SW
I
Ratings
D2SW-3
D2SW-01
Note: 1.
The above current ratings are the values of the steady-state current.
2.
Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC).
3.
Lamp load has an inrush current of 10 times the steady-state current.
4.
Motor load has an inrush current of 6 times the steady-state current.
I
Contact Form
* Indicates lead wire color
I
Approvals
UL (File No. E41515), CSA (File No. LR21642-388), EN 61058-1
Rated Voltage
Non-inductive load (A)
Inductive load
Resistive load
Lamp load
Inductive load
Motor load
NC NO NC NO NC NO NC NO
125 VAC
3 A
1 A
0.5 A
1 A
0.5 A
1 A
0.5 A
250 VAC
2 A
0.5 A
0.3 A
0.5 A
0.3 A
0.5 A
0.3 A
30 VDC
3 A
1 A
1 A
1 A
Rated Voltage
Non-inductive load
Inductive load
Resistive load
Lamp load
Inductive load
Motor load
NC NO NC NO NC NO NC NO
125 VAC
0.1 A
--
--
--
30 VDC
0.1 A
--
--
--
SPTD
(standard)
SPST-NO
(
Consult Omron for ordering information
)
SPST-NC
(
Consult Omron for ordering information
)
Snap Action Switch
D2SW
1073
Dimensions
Unit: mm (inch)
Note: 1.
Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
2.
The above illustrations and dimensions are for models with solder terminals. Refer to "Terminals" for models with tab (#110) and PCB
terminals. The dimensions not described are the same as those of models with pin plungers.
I
Pin Plunger
D2SW-3
@
S
D2SW-01
@
S
I
Hinge Lever
D2SW-3L1
@
S
D2SW-01L1
@
S
I
Simulated Roller Lever
D2SW-3L3
@
S
D2SW-01
L3@
S
I
Hinge Roller Lever
D2SW-3L2
@
S
D2SW-01
L2@
S
1074
Snap Action Switch
D2SW
Note: 1.
Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
2.
The above illustrations and dimensions are for models with pin plungers. The dimensions and operating characteristics of the actuators
of models incorporating them are the same as those of the actuators of models with both actuators and terminals.
I
Terminals
Solder Terminals
PCB Terminals
Tab Terminals (#110)
PCB Mounting
Note:
Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
I
Pin Plunger
Lead Wires