ChipFind - документация

Электронный компонент: E32-T14F

Скачать:  PDF   ZIP

Document Outline

R
2
An Update: 14 of the Newest Fiber-Optic Cables
E32
Solve More Application Problems With
14 of the Newest Fiber-Optic Cables
H
Combine cables with Omron's fiber-optic
amplifiers for a complete solution to your
sensing application
H
Over 80 other fiber-optic cable solutions
available, refer to E32 data sheet in
Omron's Sensing Products catalog
Ordering Information
J
FEATURES
Application
Features
Sensing method
Part number
Robotic applications with constant flexing
and little installation space at the sensing
1.5 mm diameter sensing head, small
4 mm bending radius for 90 degree turns
Through-beam
E32-T22B
and little installation space at the sensing
site
4 mm bending radius for 90-degree turns
prevents reduction in sensing distance
Diffuse
E32-D22B
M4 threaded head, 4 mm bending radius
Diffuse
E32-D21B
Harsh environment applications requiring
chemical-resistant sensing heads
Teflon
resin sheath protects fiber and
5 mm diameter sensing heads from chemi-
cals, solvents and oils; side-view sensing
Through-beam
E32-T14F
High-temperature sensing sites that also
require chemical resistance
--40 to 150C, side view sensing, small
2 mm diameter head for miniature target
detection
Through-beam
E32-T54
Area detection senses objects coming in
d
i i
h
i hi
id
30 mm sensing area
Through-beam
E32-T16W
j
g
random positions anywhere within a wide
beam i e pill detection on a conveyor
11 mm sensing area, side view
Through-beam
E32-T16J
beam, i.e., pill detection on a conveyor
16 alternated light source/receiver fiber
pairs over a 10.85 mm area, side view
Diffuse
E32-D36P1
High-precision detection requires the same
ti
iti
dl
f th di
M3 threaded head, 2 m cable length
Diffuse, coaxial
E32-C31
g p
q
operating position regardless of the direc-
tion from which the target enters the detec-
M3 threaded head, 1 m cable length
Diffuse, coaxial
E32-C41
tion from which the target enters the detec-
tion area
2 mm dia. sensing head, standard fiber
Diffuse, coaxial
E32-C42
Minute object detection in severely space-
constrained sensing sites
2 mm dia. sensing head with 0.5 dia. x
15 mm probe detects objects as small as
gold wire (0.01 mm dia.).
Diffuse
E32--D331
Precise position detection with background
suppression for reflective surface objects,
f
Rugged aluminum square
sensing head. When used in
f
Left side
emitter
Convergent beam
diffuse
E32-L56E1
suppression for reflective surface objects,
i.e., positioning glass wafers, slides
sensing head. When used in
pairs, eliminate mutual interfer-
ence by ordering one of each.
Right side
emitter
diffuse
E32-L56E2
Note: Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
J
ACCESSORIES (ORDER SEPARATELY)
Description
Applicable fiber-optic cables
Specification
Part number
Small spot lens adapters
Use with E32-D32 and E32-C42 fiber-optic cables
3.7 mm dia. lens
E39--F3A
p
p
Use with E32-C31 and E32-C41 fiber-optic cables
3.7 mm dia. lens
E39-F3A-5
p
4.8 mm dia. lens
E39--F3B
3.7 mm dia. lens
E39-F3C
E32
E32
3
Sensing Distance with Fiber-optic Cables
J
THROUGH-BEAM FIBERS
: Long-distance mode
: Standard mode
: High-speed mode
D
"Standard object" measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the
fiber core diameter or the lens diameter for models with a lens.
D
"Minimum sensing object" is shown in parentheses below the standard object. The minimum sensing object size was determined
when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
Indicates models that customers can cut to length for their application. Models without this mark are pre-cut by the factory to maintain
their respective specifications.
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
Legend:
DAN-HS E3X-DA-N (Digital amplifier-- high speed mode)
DAN-LD E3X-DA-N (Digital amplifier-- long distance mode)
DAN-SM E3X-DA-N (Digital amplifier-- standard distance mode)
J
THROUGH-BEAM, GENERAL PURPOSE TYPE
Application Features
Appearance
Type
Detection distance
Standard object
(Min. detectable
object: opaque)
Part number
Flexible,
i t
Ideal for mounting
i
ti
DAN-HS
80 mm
0.5-mm dia.
(0 01
di )
E32-T22B
,
resists
breaking
g
on moving sections
4 mm bending radius
1.5 mm dia.
DAN-SM
200 mm
(0.01-mm dia.)
E32 T22B
breaking
4 mm bending radius
DAN-LD
220 mm
J
SPECIAL-PURPOSE THROUGH-BEAM FIBERS
Application Features
Appearance
Type
Detection distance
Standard object
(Min. detectable
object: opaque)
Part number
Chemical
resistant
Side view Teflon-
covered *1; with-
stands chemicals
5-mm dia.
DAN-HS
150 mm
3.0-mm dia.
(0.01-mm dia.)
E32-T14F
stands chemicals
and harsh environ-
ments;
Operating ambient
DAN-LD
400 mm
Operating ambient
temperature:
--30_C to 70_C
(--22_F to 158_F)
DAN-SM
500 mm
Heat
resistant
Side-view; resists
150C *2; Detects
minute targets; fiber
2-mm dia.
DAN-SM
80 mm
1.0-mm dia.
(0.01-mm dia.)
E32-T54
minute targets; fiber
sheath material:
fluororesin;
Operating ambient
DAN-LD
230 mm
Operating ambient
temperature:
--40_C to 150_C
(--40_F to 302_F)
DAN-SM
290 mm
Area
sensing
Detects in a 30-mm
area
DAN-SM
660 mm
0.3-mm dia.*2
E32-T16W
sensing
*3
area
30 mm
DAN-LD
1,800 mm
30 mm
DAN-SM
2,300 mm
Side-view; suitable
f
li ti
ith
DAN-SM
660 mm
0.2-mm dia.
E32-T16J
for applications with
limited spatial depth
DAN-LD
1,800 mm
E32 T16J
limited spatial depth
11 mm
DAN-SM
2,300 mm
Note: 1. Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
2. For continuous operation, use the products within the temperature ranging from --40C to 130C (--40F to 266F)
3. These figures are for a sensing distance of 100 mm and for detecting over a 11-mm area, or 10-mm area for the E32-T16.
(Figures for the diameter of sensing objects are in the still state.)
E32
E32
4
J
DIFFUSE FIBERS
: Long-distance mode
: Standard mode
: High-speed mode
D
"Standard object" measurements were made with E3X-DA-N set to Standard mode.
D
"Minimum sensing object" is shown in parentheses below the standard object. The values of the minimum sensing object were
obtained at a distance where the smallest object (gold wire) can be sensed with the Diffuse Fiber Unit.
D
The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the
amplifier to "two-point teaching with or without-object teaching."
Indicates models that customers can cut to length for their application. Models without this mark are pre-cut by the factory to maintain
their respective specifications.
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
Legend:
DAN-HS E3X-DA-N (Digital amplifier-- high speed mode)
DAN-LD E3X-DA-N (Digital amplifier-- long distance mode)
DAN-SM E3X-DA-N (Digital amplifier-- standard distance mode)
Application Features
Appearance
Type
Detection distance
(Values measured
using white paper)
Standard object
(Min. sensing
object)
Part number
Thin fiber
Minute object
d
i
(0
0.5-mm dia.
DAN-HS
1 mm
2525
(0 01
di )
E32-D331
j
detection (0.5-mm
dia )
2-mm dia.
DAN-SM
3 mm
(0.01-mm dia.)
dia.)
DAN-LD
4 mm
Flexible
(
i t
Ideal for mounting on
i
ti
M4
DAN-HS
10 mm
100100
(0 01
di )
E32-D21B
(resists
breaking)
g
moving sections
(R4)
M4 screw
DAN-SM
70 mm
(0.01-mm dia.)
E32 D21B
breaking)
(R4)
DAN-LD
90 mm
DAN-HS
10 mm
5050
(0 01
di )
E32-D22B
1.5-mm dia.
DAN-SM
30 mm
(0.01-mm dia.)
DAN-LD
40 mm
J
SPECIAL-PURPOSE DIFFUSE FIBERS
Application Features
Appearance
Type
Detection distance
(Values measured
using white paper)
Standard object
(Min. sensing
object)
Part number
Coaxial
M3 coaxial; high-
precision positioning
M3 screw
DAN-HS
25 mm
2525
(0.01-mm dia.)
E32-C31
precision positioning
accuracy; possible to
mount small-spot
M3 screw
DAN-SM
75 mm
(0.01-mm dia.)
mount small spot
lens (E39-F3A-5/
F3B/F3C)
DAN-LD
100 mm
M3 coaxial; high-
precision positioning
M3 screw
DAN-HS
10 mm
5050
(0.01-mm dia.)
E32-C41
precision positioning
accuracy; possible to
mount small-spot
/
M3 screw
DAN-SM
35 mm
(0.01-mm dia.)
mount small spot
lens (E39-F3A-5/
F3B/F3C)
DAN-LD
45 mm
2-mm dia. coaxial;
high-precision
iti i
DAN-HS
10 mm
5050
(0.01-mm dia.)
E32-C42
g p
positioning accuracy;
possible to mount
small-spot (0.1 to 0.6
2-mm dia.
DAN-SM
35 mm
(0.01 mm dia.)
small-spot (0.1 to 0.6
mm dia.) lens
(E39-F3A)
DAN-LD
45 mm
Area
i
Side-view; detection
id
DAN-HS
50 mm
300300
(0 01
di )
E32-D36P1
sensing
over wide areas
DAN-SM
150 mm
(0.01-mm dia.)
DAN-LD
200 mm
Conver-
gent beam
Suitable for
positioning crystal
glass
DAN-SM
4 to 12 mm
100100 mm
Soda glass with 7%
reflection factor
E32-L56E1
E32-L56E2
E32
E32
5
Specifications
J
THROUGH-BEAM FIBER-OPTIC CABLES
Part number
Operating ambient
temperature
Operating relative
humidity
Permissible bending
radius
Core
material
Sheath material
Enclosure
rating
E32-T14F
--40C to 70C (--40F
to 158F) with no icing
35% to 85% with no
condensation
40 mm
PMMA
Teflon
resin
IEC IP67
E32-T16J
--40C to 70C (--40F
to 158F) with no icing
10 mm
PVC
IEC IP50
E32-T16W
--25C to 55C (--13F
to 131F) with no icing
10 mm
PVC
IEC IP50
E32-T22B
--40C to 70C (--40F
to 158F) with no icing
4 mm min.
PVC
IEC IP67
E32-T54
--40C to 150C (--40F
to 302F) with no icing*
35 mm
Fluoride resin
IEC IP67
*When used continuously between --40C and 130C (--40F and 266F)
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
J
DIFFUSE FIBER-OPTIC CABLES
Part number
Operating ambient
temperature
Operating relative
humidity
Permissible bending
radius
Core
material
Sheath material
Enclosure
rating
E32-D21B
--40C to 70C (--40F
t 158F) ith
i i
35% to 85% with no
d
ti
4 mm min.
PMMA
PVC
IEC IP67
E32-D22B
to 158F) with no icing
condensation
4 mm min.
E32-D331
25 mm
Polyethylene
IEC IP67
E32-D36P1
25 mm min.
--
E32-C31
--40C to 70C (--40F
t 158F) ith
i i
25 mm min.
PVC
IEC IP67
E32-C41
to 158F) with no icing
25 mm min.
E32-C42
25 mm min.
E32-L56E1
0C to 70C (32F to
158F) ith
i i
35 mm min.
Fluoride resin
IEC IP40
E32-L56E2
158F) with no icing
35 mm min.
E32
E32
6
Dimensions
Unit: mm (inch)
J
THROUGH-BEAM FIBER-OPTIC CABLES
E32-T14F
Sensing head 5 (0.20) dia.
4 (0.16) dia.
Optical fiber, 2.2 (0.09) dia.
21 (0.83)
4.5 (0.18)
2 m (6.56 ft)
100 (3.93)
Fluoride resin
Optical axis
E32-T16J
19
(0.75)
20
(0.79)
4 (0.16)
4
(0.16)
14.5
(0.57)
3.3 (0.13)
27
(1.06)
Receiver
Emitter
Sensing surface
Optical
axis
Two, 3.2-dia.
mounting hole,
6-dia. counter-
sinking
Sensing head: ABS.
Prism: PMMA
2.2-dia.
optical
fiber
Sensing surface
2 x 11 (0.08 x 0.43)
2 m
(6.56 ft)
2
10.7
E32-T16W
Sensing head
(ABS)
Two, 3.2 (0.13) dia. mounting
holes, 6 (0.24) countersinking
18 (0.71)
Sensing
surface
3 x 30
(0.12 x
1.18)
Optical
axis
18.5
(0.73)
45
(1.77)
5 (0.20)
23 (0.91)
2 m
(6.56 ft)
Optical fiber,
2.2 (0.09) dia.
12
(0.47)
Mounting Holes
Two, M3
45
(1.77)
65
(2.56)
69
(2.72)
E32
E32
7
Unit: mm (inch)
E32-T22B
Sensing head
(nickel-plated brass)
Four, 0.25 (0.01) dia.
1.5
(0.06)
dia.
Optical fiber,
1 (0.04) dia.
10
(0.39)
2 m (6.56 ft)
25 (0.98)
10
(0.39)
Fiber attachment
(E39-F9)
E32-T54
Sensing head
(stainless steel
SUS303)
Optical fiber, 2.2 (0.09) dia.
20 (0.9)
Sensing
surface
45 (1.77)
25 (0.98)
2 (0.08) dia.
2.5 (0.10)
45
2 m (6.56 ft)
1.7 (0.07)
1 (0.04)
3 (0.12) dia.
Note: Sensing head withstands tem-
peratures to 150C (302F).
When used continuously, do
not exceed 130C (266F).
J
DIFFUSE FIBER-OPTIC CABLES
E32-D21B
7
(0.28)
10
(0.39)
2.4 (0.09)
3
(0.12)
3.2
(0.13)
2 m (6.56 ft)
15 (0.59)
25 (0.98)
Two, 0.25
(0.01) dia.
Optical fiber,
two, 1 (0.04) dia.
Two fiber attachments (E39-F9)
Two toothed washers
Sensing head
(SUS303)
M4 x 0.7 (0.03)
Two hexagon clamping nuts
E32-D22B
10
(0.39)
15 (0.59)
2 m
(6.56 ft)
25 (0.98)
100 (3.94)
Four, 0.25
(0.01) dia.
Sensing head
(SUS304),
2 (0.08) dia.
Optical fiber,
1 (0.04) dia.
Branching (ABS),
3 (0.12) dia.
Sleeve (not removable)
1.5
(0.06)
dia.
15 (0.59)
E32-D331
10
(0.39)
25 (0.98)
Two,
0.125
(0.005)
dia.
Sensing head
(SUS303),
2 (0.08) dia.
Flexible tubing,
1.2 (0.05) dia.
Branching,
3.5 (0.14) dia.
Sleeve (not removable)
0.5 (0.02) dia.
stainless tube
15 (0.59)
2 m
(6.56 ft)
100 (3.94)
15 (0.59)
15 (0.59)
E32
E32
8
E32-D36P1
Mounting Holes
Sensing head
(nickel-plated
brass)
32 x 0.265 dia.
(Light emission
fibers and light
reception fibers
are alternately
position.)
Two, M3
Two 2.2-dia.
optical fibers
10
(0.39)
10 (0.39)
2 m
(6.56 ft)
25
(0.98)
15 (0.59)
5 (0.20)
5 (0.20)
2 (0.08)
10.85
(0.43)
Two, M3
E32-C31
10
(0.39)
25 (0.98)
2.5
(0.10)
Note: The fiber for the emitter is identified by a white line.
Light emission fiber
0.5 (0.02) dia.
Optical fibers,
two, 1 (0.04) dia.
Two fiber attachments (E39-F9)
Light reception fiber
four, 0.25 (0.01) dia.
15 (0.59)
22 (0.87)
2 m (6.56 ft)
12
(0.47)
Sensing head
(nickel-plated
brass) M3 x 0.5,
2.44 to 2.49
minor diameter
Two hexagon clamp nuts
Two toothed washers
Heat-shrinkable tubing
E32-C41
10
(0.39)
25 (0.98)
5
(0.20)
100 (3.94)
1 m (3.28 ft)
Two hexagon
clamping nuts
Two fiber attachments
(not removable)
One, 0.175 (0.007) dia.
light emission fiber
Sensing head
(SUS303),
M3 x 0.5
Branching
(ABS),
3.5 (0.14) dia.
Six, 0.175 (0.007) dia.
light reception fiber
Two toothed
washers
Flexible tubing,
2.6 (0.10) dia.
17 (0.67)
1.8
(0.07)
15 (0.59)
22 (0.87)
White: Heat-
shrinkable tubing
for emitter side
Two optical
fibers, 1.2
(0.05) dia.
E32
E32
9
Unit: mm (inch)
E32-C42
25 (0.98)
10
(0.39)
15 (0.59)
22 (0.87)
2
(0.08)
1 m (3.28 ft)
100 (3.94)
15 (0.59)
5
(0.20)
Flexible tubing,
2.6 (0.10) dia.
One, 0.175 (0.007) dia.
light emission fiber
Sensing head
(SUS303),
2 (0.08) dia.
Two optical fibers,
1.2 (0.05) dia.
Branching
(ABS)
Six, 0.175 (0.007) dia.
light reception fiber
Two fiber attachments
(not removable)
White: Heat-
shrinkable tubing
for emitter side
3 (0.12) dia.
90
15.2
(0.60)
48 (1.89)
6
(0.24)
3.3
(0.13)
3
(0.12)
38 (1.38)
23 (0.91)
Sensing head
(aluminum)
Light
recep-
tion
fiber,
2.2 dia.
Light
emis-
sion
fiber,
2.2 dia,
Note: Insert the fiber with the label into
the emitter side of the amplifier.
Optical
axis
Two mounting
holes, 3.5
(0.14) dia.
countersinking
10
(0.39)
5
(0.20)
35
(1.38)
1.5 m
(4.92 ft)
58 (2.28)
25
(0.98)
15.2
(0.60)
E32-L56E2
Light reception
fiber, 2.2 dia.
Light emission
fiber, 2.2 dia,
E32-L56E1
E32
E32
10
J
ACCESSORIES (ORDER SEPARATELY)
Small Spot Lens Unit E39--F3A
M2 x 2 hexagon set screw
(for fastening fibers)
4 dia.
6 dia.
13
23
Lens (3.7 dia.)
2.1 dia.
3
Material:
Tube: Aluminum
Optical lens: Optical glass
Note:
E39-F3A is a Lens Unit for E32-C42 and E32-D32 cables.
Small Spot Lens Unit E39-F3A-5
Lens (3.7 dia.)
2.1 dia.
5 dia.
M3 x 0.5,
effective
length: 3
Flat knurled nut
Note:
E39-F3A-5 is a Lens Unit for E32-C31 and E32-C41 cables.
4 dia.
Material:
Tube: Aluminum
Optical lens: Optical glass
Small Spot Lens Unit E39-F3B
Material:
Tube: Aluminum
Optical lens: Optical glass
Lens (4.8 dia.)
Note:
E39-F3B is a Lens Unit for E32-C31 and E32-C41 cables.
6 dia. 5.5 dia.
M3 x 0.5,
depth:
4.4
Small Spot Lens Unit E39-F3C
Note:
E39-F3C is a Lens Unit for E32-C31 and E32-C41 cables.
Lens
(3.7 dia.)
5 dia.
M3 x 0.5,
effective
length: 3
Material:
Tube: Aluminum
Optical lens: Optical glass
4.3 dia.
Flat
knurled
nut
Installation
J
FIBER--OPTIC CABLES
Mounting
Tightening Force
The tightening force applied to the sensing head should be as
follows:
Threaded Model
Unthreaded Model
Spring mounting clip
Toothed washers
Nuts
(attachment)
Set screw (M 3 max.)
Sensing head
Tightening torque
M3/M4 screw
0.78 N S m max.
M6 screw/
6-mm dia. column
0.98 N S m max.
1.5-mm dia. column
0.2 N S m max.
2-mm dia./3-mm
dia. column
0.29 N S m max.
E32-T12F 5-mm
dia. Teflon model
0.78 N S m max.
E32-D12F 6-mm
dia. Teflon model
E32-T16
0.49 N S m max.
E32-L25A
0.78 N S m max.
Use a proper-sized wrench.
E32
E32
11
Fiber Connection and Disconnection
The E3X amplifier has a lock button. Connect or disconnect the
fibers to or from the E3X amplifier using the following procedures:
1. Connection
Remove the protective cover, insert the fiber into the amplifier,
and lower the lock button until a click is heard.
Lock button
Fiber
Fiber insertion mark
After cutting the fiber using the E39-F4 Fiber Cutter, put an
insertion mark on the fiber as a guide for correct insertion into the
amplifier, and then insert the fiber up to this mark.
2. Disconnection
Remove the protective cover and raise the lock button to pull out
the fiber.
Protective cover
Unlocked
Locked
Note: Remove the protective cover and raise the lock lever to
pull out the fiber. (Before removing the fiber, be sure to
confirm that the lock is released so as to maintain the fiber
properties.)
3. Precautions for Fiber Connection/Disconnection
Be sure to lock or unlock the lock button within an ambient
temperature range between --10C and 40C.
J
FIBER INSERTION
Make sure that the fiber is fully inserted in the amplifier. The
sensing distance may decrease if the fiber is not fully inserted.
Standard 2.2-mm dia. Fiber
Thin Fiber with the E39-F9 Attachment
Fiber with Fixed Length
12.6 mm
Fiber Unit
Amplifier
Amplifier
Fiber Unit
12.6 mm
The portion from the tip to
the insertion mark of each
fiber into the amplifier.
12.6 mm
Amplifier
The portion from the tip to
the insertion mark of each
fiber into the amplifier.
J
CUTTING FIBER
Insert a fiber into the Fiber Cutter and determine the length of the
fiber to be cut.
Press down the Fiber Cutter in a single stroke to cut the fiber.
An insertion mark can be placed on the fiber to serve as a
reference when inserting the fiber into the amplifier. Use the
following procedure.
Confirm through the cutter hole that the fiber is inserted beyond
the insertion mark hole so that the insertion mark is properly
indicated, and then press firmly down on the cutter.
(2)
(1)
Insert the fiber into the amplifier up to the insertion mark. Proper
fiber performance will not be achieved unless the fiber is inserted
all the way to the insertion mark. (This method is applicable to
standard, 2.2-mm-dia. fibers only.)
12.6 mm Insertion mark
2.2-mm dia.
The cutting holes cannot be used twice. If the same hole is used
twice, the cutting face of the fiber will be rough and the sensing
distance will be reduced. Always use a new hole.
E32
E32
12
Use either one of the two holes on the right (refer to the following
figure) to cut a thin fiber as follows:
1. An attachment is temporarily fitted to a thin fiber before ship-
ment.
Temporarily fitted
Thin fiber attachment (E39-F9)
2. Secure the attachment after adjusting the position of the thin
fiber in the direction indicated by the arrow.
3. Insert the fiber to be cut into the E39-F4.
Three holes for
standard fiber
(2.2-mm dia.)
Cutter E39-F4
Two holes for
thin fiber
4. Finished state (proper cutting state)
Approx.
0.5 mm
Note: Insert the fiber in the direction indicated by the arrow.
Connection
Do not pull or press the fiber units. The fiber units have a
withstand force of 9.8 N to 29.4 N (pay utmost attention because
the fibers are thin).
Do not bend the fiber unit beyond the permissible bending radius.
Do not bend the edge of the fiber units (excluding the E32-TjR
and E32-DjR).
Correct
Incorrect
20 mm min.
Amplifier
Fiber Unit
20 mm min.
Note: Do not apply excess force on Fiber units.
Fiber Unit
Nylon wireholder
Correct
Incorrect
Metal holder
Excessive vibration can break the fiber head. Use the following
method to prevent fiber head breakage.
A one-turn loop can
absorb vibrations.
Tape
E39-F32j Protective Spiral Tubes
Insert a fiber to the protective spiral tube from the head connector
side (screwed) of the tube.
Fiber
Protective spiral
tube
Push the fiber into the protective spiral tube. The tube should be
straight so that the fiber is not twisted when inserted. Then turn
the end cap of the spiral tube.
Protective spiral
tube
Fiber
Secure the protective spiral tube on a suitable place with the
attached nut.
Mounting panel
Hexagon clamping nut
Fiber
Toothed washer
Protective spiral
tube
Use the attached saddle to secure the end cap of the protective
spiral tube. To secure the protective spiral tube at a position other
than the end cap, apply tape to the tube so that the portion
becomes thicker in diameter.
E32
E32
Saddle
End cap
Tube
E39-F10 Fiber Connector
Mount the fiber connector as shown in the following illustrations
Splice
Retention clip
Retention clip
Fiber
Each fiber unit should be as close as possible before they are
connected.
Sensing distance will be reduced by approximately 25% when
fibers are connected.
Only 2.2-mm-dia. fibers can be connected.
C at. N o. C ED SAX4 11/01 Spec ific ations s ubjec t to c hange w it hout not ic e. P r int ed in U . S . A .
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
1-800-55-OMRON
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
R
OMRON ON--LINE
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci