PCB Relay

G6S

Surface Mount DPDT Relay

Long terminals for ideal for soldering and mounting
reliability.

Space-saving inside-L terminal.

High dielectric strength between coil and contacts
(2,000 VAC), and between contacts of different
polarity (1,500 VAC).

High impulse withstand voltages between coil and
contacts, and between contacts of different polarity
(2,500 V, 2 x 10

s: Bellcore requirements).

Low power consumption (140 mW).

Bifurcated crossbar contact (Au-clad) and plastic
sealed construction for high reliability.

Applicable to IRS.

High sealability after IRS.

Ultra-miniature at 15 x 7.5 x 9.4 mm (L x W x H).

Through-hole terminal is available

EN60950/EN41003 Supplementary Insulation-cer-
tified type is available.

Ordering Information

Classification

Single-side

stable

Single-winding

latching

Double-winding

latching

Single-side stable

EN60950/EN41003

DPDT

Plastic

l d

Through-hole terminal

G6S-2

G6SU-2

G6SK-2

G6S-2-Y

as c

sealed

Surface mount
t

Inside-L

G6S-2G

G6SU-2G

G6SK-2G

G6S-2G-Y

Su ace

terminal

Outside-L

G6S-2F

G6SU-2F

G6SK-2F

G6S-2F-Y

Rated coil voltage

Note:

1. When ordering, add the rated coil voltage to the model number.

Example: G6S-2F 12 VDC

2. When ordering tape packing, add "-TR" to the model number.

Example: G6S-2F-TR 12 VDC

Be sure since "-TR" is not part of the relay model number, it is not marked on the relay case.

Tape packing

Model Number Legend:

G6S

j j

VDC

Relay Function

None: Single-side stable

Single-winding latching

Double-winding latching

Contact Form

DPDT

Terminal Shape

None: Through-hole terminal

Inside-L surface mount terminal

Outside-L surface mount terminal

Approved Standards

None: UL/CSA

EN60950/EN41003

Rated Coil Voltage

(Refer to "Coil Ratings")

Back

G6S

Specifications

Coil Ratings

Single-side Stable Type (G6S-2, G6S-2F, G6S-2G)

Rated voltage

4.5 VDC

5 VDC

12 VDC

24 VDC

Rated current

31.0 mA

28.1 mA

11.7 mA

8.3 mA

Coil resistance

145

178

1,028

2,880

Must operate voltage

75% max. of rated voltage

Must release voltage

10% min. of rated voltage

Max. voltage

200% of rated voltage at 23

C, 130% at 85

170% of rated voltage
at 23

C, 130% at 85

Power consumption

Approx. 140 mW

Approx. 200 mW

Note:

1. The rated current and coil resistance are measured at a coil temperature of 23

C with a tolerance of

10%.

2. Operating characteristics are measured at a coil temperature of 23

Single-winding Latching Type (G6SU-2, G6SU-2F, G6SU-2G)

Rated voltage

4.5 VDC

5 VDC

12 VDC

24 VDC

Rated current

22.2 mA

20 mA

8.3 mA

6.3 mA

Coil resistance

203

250

1,440

3,840

Coil inductance
(H) (

)

Armature OFF

0.27

0.36

2.12

5.80

duc a ce

(H) (ref. value)

Armature ON

0.14

0.18

1.14

3.79

Must set voltage

75% max. of rated voltage

Must reset voltage

75% max. of rated voltage

Max. voltage

180% of rated voltage at 23

C, 140% at 85

Power consumption

Approx. 100 mW

Approx. 150 mW

Note:

1. The rated current and coil resistance are measured at a coil temperature of 23

C with a tolerance of

10%.

2. Operating characteristics are measured at a coil temperature of 23

Double-winding Latching Type (G6SK-2, G6SK-2F, G6SK-2G)

Rated voltage

4.5 VDC

5 VDC

12 VDC

24 VDC

Rated current

44.4 mA

40 mA

16.7 mA

12.5 mA

Coil resistance

101

125

720

1,920

Coil
i d

Set

Armature OFF

0.12

0.14

0.60

1.98

Co
inductance
(H)

Armature ON

0.074

0.088

0.41

1.23

(H)
(ref. value)

Reset

Armature OFF

0.082

0.098

0.46

1.34

(ref. value)

Armature ON

0.14

0.16

0.54

2.23

Must set voltage

75% max. of rated voltage

Must reset voltage

75% max. of rated voltage

Max. voltage

170% of rated voltage at 23

C, 130% at 85

140% of rated voltage
at 23

C, 110% at 70

Power consumption

Approx. 200 mW

Approx. 300 mW

Note:

1. The rated current and coil resistance are measured at a coil temperature of 23

C with a tolerance of

10%.

2. Operating characteristics are measured at a coil temperature of 23

Single-side Stable EN60950/EN41003 Approved Type (G6S-2-Y, G6S-2F-Y, G6S-2G-Y)

Rated voltage

5 VDC

12 VDC

24 VDC

Rated current

40 mA

16.7 mA

9.6 mA

Coil resistance

125

720

2,504

Must operate voltage

75% max. of rated voltage

Must release voltage

10% min. of rated voltage

Max. voltage

170% of rated voltage at 23

C, 130% at 85

170% of rated voltage
at 23

C, 110% at 70

Power consumption

Approx. 200 mW

Approx. 230 mW

Note:

1. The rated current and coil resistance are measured at a coil temperature of 23

C with a tolerance of

10%.

2. Operating characteristics are measured at a coil temperature of 23

G6S

Contact Ratings

Load

Resistive load (cos

= 1)

Rated load

0.5 A at 125 VAC; 2 A at 30 VDC

Contact material

Ag (Au-clad)

Rated carry current

2 A

Max. switching voltage

250 VAC, 220 VDC

Max. switching current

2 A

Max. switching capacity

62.5 VA, 60 W

Min. permissible load

A at 10 mVDC

Note:

P level:

= 0.1 x 10

/operation

Characteristics

Contact resistance

75 m

max.

Operate (set)time

4 ms max. (mean value: approx. 2.5 ms; latching type: approx. 2 ms)

Release (reset) time

4 ms max. (mean value: approx. 1.5 ms; latching type: approx. 2 ms)

Bounce time

Operate: Approx. 0.5 ms
Release: Approx. 0.5 ms
Set/Reset: Approx. 0.5 ms

Max. operating frequency

Mechanical: 36,000 operations/hr
Electrical:

1,800 operations/hr (under rated load)

Insulation resistance

1,000 M

min. (at 500 VDC)

Dielectric strength

2,000 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between coil and contacts (double-winding latching)
1,500 VAC, 50/60 Hz for 1 min between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
500 VAC, 50/60 Hz for 1 min between set and reset coil (double-winding latching)

Impulse withstand voltage

2,500 V, 2 x 10

s between coil and contacts

1,500 V, 10 x 160

s between coil and contacts (double-winding latching)

2,500 V, 2 x 10

s between contacts of different polarity

1,500 V, 10 x 160

s between contacts of same polarity (conforms to FCC Part 68)

Vibration resistance

Destruction: 10 to 55 Hz, 5-mm double amplitude
Malfunction: 10 to 55 Hz, 3.3-mm double amplitude

Shock resistance

Destruction: 1,000 m/s

(approx. 100G)

Malfunction: 750 m/s

(approx. 75G)

Life expectance

Mechanical:100,000,000 operations min. (at 36,000 operations/hr)
Electrical:

100,000 operations min. (2 A at 30 VDC, resistive load: 1,200 operations/hr)
100,000 operations min. (0.5 A at 125 VAC, resistive load)

Ambient temperature

Operating: 40

C to 85

C (with no icing), 40

C to 70

C (double-winding latching, 24 VDC)

Storage:

C to 85

C (with no icing)

Ambient humidity

Operating: 35% to 85%

Weight

Approx. 2 g

Approved Standards

UL1950 (File No. E41515)/CSA C22.2 No.950 (File No. LR24825)

Model

Contact form

Coil ratings

Contact ratings

G6S-2, G6S-2F, G6S-2G

DPDT

1.5 to 48 VDC

2 A, 30 VDC
0 3 A 110 VDC

G6SU-2, G6SK-2, G6SU-2F,
G6SU-2G, G6SK-2F, G6SK-2G

1.5 to 24 VDC

, 30

0.3 A, 110 VDC
0.5 A, 125 VAC

EN60950/EN41003

Model

Contact form

Isolation category

Voltage

G6S-2-Y, G6S-2G-Y, G6S-2F-Y

DPDT

Supplementary Isolation

250 VAC

G6S

Engineering Data

Max. Switching Capacity

Single-winding Latching
Double-winding Latching

Switching current (A)

Switching voltage (V) Ambient temperature (

Maximum voltage (%)

Ambient Temperature vs.
Maximum Voltage

Single-side Stable

Ambient temperature (

Maximum voltage (%)

AC resistive load

DC resistive load

12 VDC max.

24 VDC
(G6S-Y, 12 VDC max.)

G6SU

G6SK
12 VDC
max.

G6SK
24 VDC

Reference Data

Ambient Temperature vs. Switching Current

Single-side Stable

Switching current (A)

Single-winding Latching
Double-winding Latching

Ambient temperature (

Switching current (A)

Ambient temperature (

12 VDC max.

G6SU
12 VDC max.

G6SU
24 VDC
G6SK
12 VDC max.

G6SK
24 VDC

24 VDC
(G6S-Y)

24 VDC
(G6S-Y, 12 VDC
max.)

24 VDC
(G6S-Y)

Recommended Soldering Time vs. Surface PCB Temperature

(The temperature profile indicates the temperature on the surface of the PCB.)

IRS

Time (s)

emperature ( C)

Soldering

Preheating

Soldering

Preheating

G6S

Tape Packing

When ordering, add "-TR" before the rated coil voltage for tape packing.

Tape type:

TE2416R (Refer to EIAJ)

Reel type:

R24E (Refer to EIAJ)

Relays per reel: 400

G6S-2F, G6SU-2F, G6SK-2F, G6S-2F-Y

G6S-2G, G6SU-2G, G6SK-2G, G6S-2G-Y

Cover tape

Emboss tape

Carrier tape

0.2

Feed direction

Orientation mark

0.5

0.3

29.5

1.0

25.5

0.5

R1.0

330

Precautions

Use a DC power supply with 5% or less ripple factor to operate the
coil.

Do not use the G6S where subject to strong external magnetic
fields.

Do not use the G6S where subject to magnetic particles or exces-
sive amounts of dust.

Do not reverse the polarity of the coil (+, ).

Latching types are delivered in the reset position. We recommend
that a reset voltage be applied in advance to start operation.

Do not drop the G6S or otherwise subject it to excessive shock.

Remove the relay from the packing immediately prior to usage.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. K93-E1-2C

Document Outline

Ð­Ð»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: G6S-212VDC

Document Outline

ÐÐ»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: G6S-212VDC