LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
3 mm (T1) LED, Non Diffused
2003-09-03
1
Besondere Merkmale
Gehusetyp: eingefrbtes, klares 3 mm (T1)
Gehuse
Besonderheit des Bauteils: Ltspiee mit
Aufsetzebene
Wellenlnge: 628 nm (super-rot),
606 nm (orange), 587 nm (gelb),
570 nm (grn), 560 nm (pure green)
Abstrahlwinkel: 50
Technologie: GaAlP (super-rot, orange, gelb,
grn), GaP (pure green)
optischer Wirkungsgrad: 1,5 lm/W (super-rot,
orange, gelb), 2,5 lm/W (grn),
0,6 lm/W (pure green)
Gruppierungsparameter: Lichtstrke
Ltmethode: Wellenlten (TTW)
Verpackung: Schttgut, gegurtet lieferbar
Anwendungen
optischer Indikator
Hinterleuchtung (LCD, Handy, Schalter,
Tasten, Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
Signal- und Symbolleuchten
Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u..)
Innenbeleuchtung im Automobilbereich
(z.B. Instrumentenbeleuchtung, u..)
Leuchtschriftanzeigen
Features
package: colored, clear 3 mm (T1) package
feature of the device: solder leads with
stand-off
wavelength: 628 nm (super-red),
606 nm (orange), 587 nm (yellow),
570 nm (green), 560 nm (pure green)
viewing angle: 50
technology: GaAlP (super-red, orange, yellow,
green), GaP (pure green)
optical efficiency: 1.5 lm/W (super-red,
orange, yellow), 2.5 lm/W (green), 0.6 lm/W
(pure green)
grouping parameter: luminous intensity
soldering methods: TTW soldering
packing: bulk, available taped on reel
Applications
optical indicators
backlighting (LCD, cellular phones, switches,
keys, displays, illuminated advertising, general
lighting)
signal and symbol luminaire
marker lights (e.g. steps, exit ways, etc.)
interior automotive lighting (e.g. dashboard
backlighting, etc.)
light writing displays
2003-09-03
2
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder
mindestens zwei Einzelgruppen.
In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten.
Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse ber einen lngeren
Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozess) erlaubt keine Zusage einer
einzelnen Helligkeitsgruppe. Daher mssen mindestens zwei Helligkeitsgruppen vorgesehen werden!
Note:
The standard shipping format for serial types includes a lower or upper family group or at least two
individual groups.
No packing unit / tape ever contains more than one luminous intensity group.
Luminosity variations caused by the technology used in current LED manufacturing processes over a
protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean
that it is not possible to assign LEDs to a single luminous intensity group. For this reason at least two
luminous intensity groups must be provided!
Typ
Type
Emissions-
farbe
Color of
Emission
Gehuse-
farbe
Color of
Package
Lichtstrke
Luminous
Intensity
I
F
= 10 mA
I
V
(mcd)
Lichtstrom
Luminous
Flux
I
F
= 10 mA
V
(mlm)
Bestellnummer
Ordering Code
LS 3340-KN
LS 3340-L
LS 3340-M
LS 3340-LP
super-red
red clear
7.1 ... 45.0
11.2 ... 18.0
18.0 ... 28.0
11.2 ... 71.0
35 (typ.)
20 (typ.)
30 (typ.)
55 (typ.)
Q62703Q1701
Q62703Q1702
Q62703Q1704
Q62703Q3223
LO 3340-KN
LO 3340-L
LO 3340-M
LO 3340-N
LO 3340-MP
orange
orange clear
7.1 ... 45.0
11.2 ... 18.0
18.0 ... 28.0
28.0 ... 45.0
18 ...
71.0
35 (typ.)
20 (typ.)
30 (typ.)
45 (typ.)
60 (typ.)
Q62703Q1886
Q62703Q2256
Q62703Q2255
Q62703Q2473
Q62703Q2628
LY 3340-JM
LY 3340-M
LY 3340-N
LY 3340-LP
yellow
yellow clear
4.5 ... 28.0
18.0 ... 28.0
28.0 ... 45.0
11.2 ... 71.0
20 (typ.)
30 (typ.)
45 (typ.)
55 (typ.)
Q62703Q1789
Q62703Q1999
Q62703Q2652
Q62703Q1792
LG 3330-KN
LG 3330-N
LG 3330-P
LG 3330-LP
green
colorless clear
7.1 ... 45.0
28.0 ... 45.0
45.0 ... 71.0
11.2 ... 71.0
35 (typ.)
45 (typ.)
70 (typ.)
55 (typ.)
Q62703Q1698
Q62703Q2010
Q62703Q4873
Q62703Q2011
LP 3340-JL
LP 3340-K
LP 3340-KM
pure green
green clear
4.5 ... 18.0
7.1 ... 11.2
7.1 ... 28.0
15 (typ.)
12 (typ.)
24 (typ.)
Q62703Q2749
Q62703Q2982
Q62703Q3211
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LS, LO,
LY, LG
LP
Betriebstemperatur
Operating temperature range
T
op
55 ... + 100
C
Lagertemperatur
Storage temperature range
T
stg
55 ... + 100
C
Sperrschichttemperatur
Junction temperature
T
j
+ 100
C
Durchlassstrom
Forward current
I
F
40
30
mA
Stostrom
Surge current
t
10
s,
D
= 0.005
I
FM
0.5
A
Sperrspannung
1)
Reverse voltage
V
R
12
V
Leistungsaufnahme
Power consumption
T
A
25 C
P
tot
130
95
mW
Wrmewiderstand
2)
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Ltpad
Junction/soldering point
Montage auf PC-Board FR 4 (Padgre
16 mm
2
)
mounted on PC board FR 4 (pad size
16 mm
2
)
Minimale Beinchenlnge
Minimum lead length
R
th JA
R
th JS
400
180
K/W
K/W
1)
fr kurzzeitigen Betrieb geeignet / suitable for short term application
2)
R
th
erhht sich um 13 K/W pro mm Beinchenlnge.
Each additional 1 mm of lead length increases R
th
by 13 K/W.
2003-09-03
4
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
Kennwerte (
T
A
= 25 C)
Characteristics
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LS
LO
LY
LG
LP
Wellenlnge des emittierten Lichtes
(typ.)
Wavelength at peak emission
I
F
= 10 mA
peak
635
610
586
572
557
nm
Dominantwellenlnge
1)
(typ.)
Dominant wavelength
I
F
= 10 mA
dom
628
606
587
570
560
nm
Spektrale Bandbreite bei 50 %
I
rel max
(typ.)
Spectral bandwidth at 50 %
I
rel max
I
F
= 10 mA
45
40
45
25
22
nm
Abstrahlwinkel bei 50 %
I
V
(Vollwinkel)
(typ.)
Viewing angle at 50 %
I
V
2
50
50
50
50
50
Grad
deg.
Durchlassspannung
2)
(typ.)
Forward voltage
(max.)
I
F
= 10 mA
V
F
V
F
2.0
2.5
2.0
2.5
2.0
2.5
2.0
2.5
2.0
2.5
V
V
Sperrstrom
(typ.)
Reverse current
(max.)
V
R
= 12 V
I
R
I
R
0.01
10
0.01
10
0.01
10
0.01
10
0.01
10
A
A
Temperaturkoeffizient von
peak
(typ.)
Temperature coefficient of
peak
I
F
= 10 mA; 10C
T
100C
TC
peak
0.11 0.12 0.10 0.11 0.11 nm/K
Temperaturkoeffizient von
dom
(typ.)
Temperature coefficient of
dom
I
F
= 10 mA; 10C
T
100C
TC
dom
0.07 0.07 0.07 0.07 0.05 nm/K
Temperaturkoeffizient von
V
F
(typ.)
Temperature coefficient of
V
F
I
F
= 10 mA; 10C
T
100C
TC
V
1.9 1.9 1.9 1.4 2.1 mV/K
Optischer Wirkungsgrad
(typ.)
Optical efficiency
I
F
= 10 mA
opt
1.5
1.5
1.5
2.5
0.6
lm/W
1)
Wellenlngen werden mit einer Stromeinprgedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt.
Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm.
2)
Spannungswerte werden mit einer Stromeinprgedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt.
Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
5
Helligkeitswerte werden mit einer Stromeinprgedauer von 25 ms und einer Genauigkeit von 11 % ermittelt.
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %.
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group
Lichtstrke
Luminous Intensity
I
V
(mcd)
Lichtstrom
Luminous Flux
V
(mlm)
J
K
L
M
N
P
4.50 ...
7.10
7.10 ... 11.20
11.20 ... 18.00
18.00 ... 28.00
28.00 ... 45.00
45.00 ... 71.00
8 (typ.)
12 (typ.)
20 (typ.)
30 (typ.)
45 (typ.)
78 (typ.)
2003-09-03
6
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
Relative spektrale Emission
I
rel
=
f
(
),
T
A
= 25 C,
I
F
= 10 mA
Relative Spectral Emission
V(
) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik
I
rel
=
f
(
)
Radiation Characteristic
%
rel
OHL01697
100
80
60
40
20
0
400
450
500
550
600
650
700
nm
I
pure-green
green
yellow
orange
super-red
V
0.8
100
1.0
80
90
70
0.4
0.6
0
0
0.2
0.4
60
50
40
30
20
0.6
0.8
10
1.0
0
100
20
40
80
60
120
OHL01646
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
7
Durchlassstrom
I
F
=
f
(
V
F
)
Forward Current
T
A
= 25 C
Maximal zulssiger Durchlassstrom
I
F
=
f
(
T
)
Max. Permissible Forward Current
LS, LO, LY, LG
Relative Lichtstrke
I
V
/
I
V(10 mA)
=
f
(
I
F
)
Relative Luminous Intensity
T
A
= 25 C
Maximal zulssiger Durchlassstrom
I
F
=
f
(
T
)
Max. Permissible Forward Current
LP
10
-1
V
pure-green
5
super-red
orange/yellow
green
OHL02145
I
F
F
V
0
10
1
10
2
10
5
mA
1.0
1.4
1.8
2.2
2.6
3.0
3.4
0
OHL00538
F
C
T
0
20
40
60
80
100
mA
10
20
30
40
50
temp. solder point
temp. ambient
T
A
T
S
T
S
A
T
V
V (10 mA)
10
-1
0
10
10
1
2
10
mA
red
yellow
green
super-red
orange
pure-green
10
-3
5
OHL02146
F
5
-2
10
5
-1
10
0
10
1
10
5
5
0
OHL00984
I
F
C
T
0
20
40
60
80
100
10
20
30
40
mA
temp. solder point
temp. ambient
T
A
T
S
T
S
A
T
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
8
Relative Lichtstrke
I
V
/
I
V(25 C)
=
f
(
T
A
)
Relative Luminous Intensity
I
F
= 10 mA
Zulssige Impulsbelastbarkeit
I
F
=
f
(
t
p
)
Permissible Pulse Handling Capability
Duty cycle
D
= parameter,
T
A
= 25 C
LS, LO, LY, LG
Zulssige Impulsbelastbarkeit
I
F
=
f
(
t
p
)
Permissible Pulse Handling Capability
Duty cycle
D
= parameter,
T
A
= 25 C
LP
yellow
green
orange
super-red
pure-green
0.0
OHL02150
C
A
0
20
40
60
80
100
V
V
I
I
0.4
0.8
1.2
1.6
2.0
(25 C)
T
OHL01162
s
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
D
I
T
T
P
F
t
P
=
D
= 0.005
0.01
0.02
0.05
0.1
0.2
0.5
DC
10
1
5
I
F
t
2
10
3
10
4
10
5
mA
p
OHL01686
s
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
D
I
T
T
P
F
t
P
=
D
= 0.005
0.01
0.02
0.05
0.2
0.5
DC
10
1
5
I
F
t
2
10
0.1
p
10
3
mA
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
9
Mazeichnung
Package Outlines
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung:
krzerer Ltspie
Cathode mark:
short solder lead
Gewicht / Approx. weight: 0.15 g
GEXY6951
3.1 (0.122)
3.4 (0.134)
0.4 (0.016)
0.6 (0.024)
2.9 (0.114)
2.7 (0.106)
0.4 (0.016)
4.8 (0.189)
4.4 (0.173)
Area not flat
0.4 (0.016)
0.6 (0.024)
0.7 (0.028)
0.8 (0.031)
0.4 (0.016)
2.54 (0.100)
spacing
27.0 (1.063)
1.2 (0.047)
1.8 (0.071)
29.0 (1.142)
Cathode
1.1 (0.043)
0.9 (0.035)
3.7 (0.146)
3.5 (0.138)
5.7 (0.224)
6.1 (0.240)
2003-09-03
10
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
Ltbedingungen
Soldering Conditions
Wellenlten (TTW)
(nach CECC 00802)
TTW Soldering
(acc. to CECC 00802)
Empfohlenes Ltpaddesign
Wellenlten (TTW)
Recommended Solder Pad
TTW Soldering
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
OHLY0598
0
0
50
100
150
200
250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C
... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s
2 K/s
ca 200 K/s
C
C
... 130
100
2 K/s
Zwangskhlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
4 (0.157)
OHLPY985
4.8 (1.890)
LS 3340, LO 3340, LY 3340, LG 3330, LP 3340
2003-09-03
11
Published by OSRAM Opto Semiconductors GmbH
Wernerwerkstrasse 2, D-93049 Regensburg
All Rights Reserved.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
All typical data and graphs are basing on representative samples, but don't represent the production range. If requested,
e.g. because of technical improvements, these typ. data will be changed without any further notice.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components
1
may only be used in life-support devices or systems
2
with the express written approval of OSRAM OS.
1
A critical component is a component used in a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2
Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
Revision History: 2003-09-03
Date of change
Previous Version:
2002-09-18
Page
Subjects (major changes since last revision)
3
thermal resistance (footnote)
4
dominant wavelength (orange)
10
annotations
2002-07-23
5
luminous intensity groups
2002-07-30
3, 4
value (reverse voltage from 5 V to 12 V)
2002-09-18
2
low yield groups deleted
2003-09-03
PDF 
ZIP