D
A
T
ASHEET
w w w. p e r k i n e l m e r. c o m / o p t o
.
Description
The CHV 30N is a self contained high
voltage supply, specially designed for the
Channel Photomultiplier CPM C900,
C1300 and C1900. It provides the
matching voltages for the cathode, the
channel entrance and channel end.
Beside, the module is prepared to switch
the potential between the two high
voltages via an external TTL-pulse, in
order to protect the CPM from over
exposure or to apply a gating function.
CHV 30N
CPM High Voltage Power Supply
Lighting
Imaging
Telecom
Sensors
Channel Photomultipliers and Modules
w w w. p e r k i n e l m e r. c o m / o p t o
2001 PerkinElmer, Inc. All rights reserved.
.
USA:
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
Phone: (408) 565-0850
Fax: (408) 565-0793
EUROPE:
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str. 31
65199 Wiesbaden
Germany
Phone: +49 611 492 534
Fax: +49 611 492 578
ASIA:
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: +65 775 1008
DS-290 Rev A 1101
CAUTION: HIGH VOLTAGE WARNING
This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other instruments. Avoid direct
contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing conductive material close to the cathode.
Ensure that no light levels are applied, generating higher anode currents than specified.
All given values are nominal/typical @ 20 C ambient temperature; specification subject to change without notice
Technical Specifications
Dimensions (mm)
CVN 30 Power Supply
*) Not valid for V
Gate
PDF 
ZIP