2003 May 15
2
Philips Semiconductors
Product specification
Schottky barrier diode
1PS10SB62
FEATURES
Ultra high switching speed
Very low capacitance
High breakdown voltage
Leadless ultra small plastic package
(1 mm
0.6 mm
0.5 mm)
Boardspace 1.17 mm
2
(approx. 10% of SOT23)
Power dissipation comparable to SOT23.
APPLICATIONS
Ultra high-speed switching
High frequency applications
Mobile communication, digital (still) cameras, PDAs and
PCMCIA cards.
DESCRIPTION
An epitaxial Schottky barrier diode encapsulated in a
SOD882 leadless ultra small plastic package.
ESD sensitive device, observe handling precautions.
handbook, halfpage
MDB391
Bottom view
Fig.1 Simplified outline (SOD882) and symbol.
Marking code: S1.
The marking bar indicates the cathode.
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
ELECTRICAL CHARACTERISTICS
T
amb
= 25
C unless otherwise specified.
Note
1. Pulse test: pulse width = 300
s;
= 0.02.
THERMAL CHARACTERISTICS
Note
1. Refer to SOD882 standard mounting conditions (footprint), FR4 with 60
m copper strip line.
Soldering
Reflow soldering is the only recommended soldering method.
SYMBOL
PARAMETER
MIN.
MAX.
UNIT
V
R
continuous reverse voltage
-
40
V
I
F
continuous forward current
-
20
mA
T
stg
storage temperature
-
65
+150
C
T
j
junction temperature
-
150
C
SYMBOL
PARAMETER
CONDITIONS
MAX.
UNIT
V
F
forward voltage
I
F
= 2 mA; see Fig.2; note 1
800
mV
I
R
reverse current
V
R
= 40 V; see Fig.3; note 1
1
A
C
d
diode capacitance
V
R
= 0 V; f = 1 MHz; see Fig.4
0.6
pF
SYMBOL
PARAMETER
CONDITIONS
VALUE
UNIT
R
th j-a
thermal resistance from junction to ambient note 1
500
K/W
2003 May 15
5
Philips Semiconductors
Product specification
Schottky barrier diode
1PS10SB62
DATA SHEET STATUS
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
LEVEL
DATA SHEET
STATUS
(1)
PRODUCT
STATUS
(2)(3)
DEFINITION
I
Objective data
Development
This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
Production
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
DEFINITIONS
Short-form specification
The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition
Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information
Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications
These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes
Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status `Production'), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
PDF 
ZIP
