ChipFind - документация

Электронный компонент: LM2903DP

Скачать:  PDF   ZIP

Document Outline

Philips
Semiconductors
Product data
Supersedes data of 2002 Jan 22
LM193A/293/A/393/A/2903
Low power dual voltage comparator
2002 Jul 12
INTEGRATED CIRCUITS
Philips Semiconductors
Product data
LM193A/293/A/393/A/2903
Low power dual voltage comparator
2
2002 Jul 12
853-0932 28616
DESCRIPTION
The LM193 series consists of two independent precision voltage
comparators with an offset voltage specification as low as 2.0 mV
max. for two comparators which were designed specifically to
operate from a single power supply over a wide range of voltages.
Operation from split power supplies is also possible, and the low
power supply current drain is independent of the magnitude of the
power supply voltage. These comparators also have a unique
characteristic in that the input common-mode voltage range includes
ground, even though operated from a single power supply voltage.
The LM193 series was designed to directly interface with TTL and
CMOS. When operated from both plus and minus power supplies,
the LM193 series will directly interface with MOS logic where their
low power drain is a distinct advantage over standard comparators.
FEATURES
Wide single supply voltage range 2.0 V
DC
to 32 V
DC
,
or dual supplies
1.0 V
DC
, to
16 V
DC
Very low supply current drain (0.8 mA) independent of supply
voltage (2.0 mW/comparator at 5.0 V
DC
)
Low input biasing current 25 nA
Low input offset current
5 nA and offset voltage
2 mV
Input common-mode voltage range includes ground
Differential input voltage range equal to the power supply voltage
Low output 250 mV at 4 mA saturation voltage
Output voltage compatible with TTL, DTL, ECL, MOS and CMOS
logic systems
APPLICATIONS
A/D converters
Wide range VCO
MOS clock generator
High voltage logic gate
Multivibrators
PIN CONFIGURATION
1
2
3
4
5
6
7
8
D, DP, and N Packages
A
B
TOP VIEW
OUTPUT A
INVERTING INPUT A
NON-INVERTING INPUT A
GND
V+
OUTPUT B
INVERTING INPUT B
NON-INVERTING INPUT B
SL00079
Figure 1. Pin configuration.
EQUIVALENT CIRCUIT
V +
100
A
3.5
A
3.5
A
100
A
Q1
Q2
Q3
Q4
Q8
Q7
Q6
Q5
INPUT
OUTPUT
+ INPUT
(One Comparator Only)
SL00080
Figure 2. Equivalent circuit.
ORDERING INFORMATION
DESCRIPTION
TEMPERATURE RANGE
ORDER CODE
DWG #
8-Pin Plastic Dual In-Line Package (DIP)
55
C to +125
C
LM193AN
SOT97-1
8-Pin Plastic Small Outline (SO) Package
25
C to +85
C
LM293D
SOT96-1
8-Pin Plastic Dual In-Line Package (DIP)
25
C to +85
C
LM293N
SOT97-1
8-Pin Plastic Small Outline (SO) Package
25
C to +85
C
LM293AD
SOT96-1
8-Pin Plastic Dual In-Line Package (DIP)
25
C to +85
C
LM293AN
SOT97-1
8-Pin Plastic Small Outline (SO) Package
0
C to +70
C
LM393D
SOT96-1
8-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
0
C to +70
C
LM393DP
SOT505-1
8-Pin Plastic Dual In-Line Package (DIP)
0
C to +70
C
LM393N
SOT97-1
8-Pin Plastic Small Outline (SO) Package
0
C to +70
C
LM393AD
SOT96-1
8-Pin Plastic Dual In-Line Package (DIP)
0
C to +70
C
LM393AN
SOT97-1
8-Pin Plastic Small Outline (SO) Package
40
C to +125
C
LM2903D
SOT96-1
8-Pin Plastic Dual In-Line Package (DIP)
40
C to +125
C
LM2903N
SOT97-1
8-Pin Plastic Thin Shrink Small Outline Package (TSSOP)
40
C to +125
C
LM2903DP
SOT505-1
Philips Semiconductors
Product data
LM193A/293/A/393/A/2903
Low power dual voltage comparator
2002 Jul 12
3
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
UNIT
V
CC
Supply voltage
32 or
16
V
DC
Differential input voltage
32
V
DC
V
IN
Input voltage
0.3 to +32
V
DC
P
D
Maximum power dissipation, T
amb
= 25
C (still-air)
1
N package
1160
mW
D package
780
mW
DP package
714
mW
Output short-circuit to ground
2
Continuous
I
IN
Input current (V
IN
< 0.3 V
DC
)
3
50
mA
T
amb
Operating temperature range
LM193A
55 to +125
C
LM293/293A
25 to +85
C
LM393/393A
0 to +70
C
LM2903
40 to +125
C
T
stg
Storage temperature range
65 to +150
C
T
sld
Lead soldering temperature (10 sec max)
230
C
NOTES:
1. Derate above 25
C, at the following rates:
N package at 9.3 mW/
C
D package at 6.2 mW/
C
DP package at 5.72 mW/
C
2. Short circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately
20 mA independent of the magnitude of V+.
3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the
input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral
NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage
level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states
will re-establish when the input voltage, which was negative, again returns to a value greater than 0.3 V
DC
.
Philips Semiconductors
Product data
LM193A/293/A/393/A/2903
Low power dual voltage comparator
2002 Jul 12
4
DC AND AC ELECTRICAL CHARACTERISTICS
V+ = 5 V
DC
, LM193A: 55
C T
amb
+125
C, unless otherwise specified. LM293/293A: 25
C T
amb
+85
C, unless otherwise specified.
LM393/393A: 0
C T
amb
+70
C, unless otherwise specified. LM2903: 40
C T
amb
+125
C, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
LM193A
LM293A/393A
LM2903
UNIT
SYMBOL
PARAMETER
TEST CONDITIONS
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
UNIT
V
OS
Input offset voltage
2
T
amb
= 25
C
1.0
2.0
1.0
2.0
2.0
7.0
mV
V
OS
Input offset voltage
2
Over temp.
4.0
4.0
9
15
mV
V
C
Input common-mode
T
amb
= 25
C
0
V+1.5
0
V+1.5
0
V+1.5
V
V
CM
voltage range
3, 6
Over temp.
0
V+2.0
0
V+2.0
0
V+2.0
V
V
IDR
Differential input
voltage
1
Keep all V
IN
0 V
DC
(or V if needed)
V+
V+
V+
V
I
Input bias current
4
I
IN(+)
or I
IN()
with output
in linear range
I
BIAS
Input bias current
4
T
amb
= 25
C
25
100
25
250
25
250
nA
Over temp.
300
400
200
500
nA
I
IN(+)
I
IN()
I
OS
Input offset current
T
amb
= 25
C
3.0
25
5.0
50
5
50
nA
OS
Over temp.
100
150
50
200
nA
I
OL
Output sink current
V
IN()
1 V
DC
; V
IN(+)
= 0;
V
O
1.5 V
DC
T
amb
= 25
C
6.0
16
6.0
16
6.0
16
mA
V
O
= 5 V
DC
; T
amb
= 25
C
0.1
0.1
0.1
nA
Output leakage
current
V
IN(+)
1V
DC
; V
IN()
=0;
V
O
= 30 V
DC
;
Over temp.
1.0
1.0
1.0
A
I
CC
Supply current
R
L
=
on both
comparators;
T
amb
= 25
C
0.8
1
0.8
1
0.8
1
mA
CC
y
R
L
=
on both
comparators; V+ = 30 V
1
2.5
1
2.5
1
2.5
mA
A
V
Voltage gain
R
L
15 k
;
V+ = 15 V
DC
;
T
amb
= 25
C
50
200
50
200
25
100
V/mV
V
IN()
1 V
DC
;
V
OL
Saturation voltage
( )
V
IN(+)
= 0; I
SINK
4 mA
V
OL
Saturation voltage
T
amb
= 25
C
250
400
250
400
400
400
mV
Over temp.
700
700
700
mV
t
LSR
Large-signal
response time
V
IN
= TTL logic swing,
V
REF
= 1.4 V
DC
;
V
RL
= 5 V
DC
;
R
L
= 5.1 k
;
T
amb
= 25
C
300
300
300
ns
t
R
Response time
5
V
RL
= 5 V
DC
;
R
L
= 5.1 k
;
T
amb
= 25
C
1.3
1.3
1.3
s
Philips Semiconductors
Product data
LM193A/293/A/393/A/2903
Low power dual voltage comparator
2002 Jul 12
5
DC ELECTRICAL CHARACTERISTICS (Continued)
V+ = 5 V
DC
, LM193A: 55
C T
amb
+125
C, unless otherwise specified. LM293/293A: 25
C T
amb
+85
C, unless otherwise specified.
LM393/393A: 0
C T
amb
+70
C, unless otherwise specified. LM2903: 40
C T
amb
+125
C, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
LM293/393
UNIT
SYMBOL
PARAMETER
TEST CONDITIONS
Min
Typ
Max
UNIT
V
OS
Input offset voltage
2
T
amb
= 25
C
2.0
5.0
mV
V
OS
In ut offset voltage
Over temp.
9.0
mV
V
CM
Input common-mode voltage range
3, 6
T
amb
= 25
C
0
V+1.5
V
V
CM
In ut common-mode voltage range
,
Over temp.
0
V+2.0
V
V
IDR
Differential input voltage
1
Keep all V
IN
0 V
DC
(or V if needed)
V+
V
4
I
IN(+)
or I
IN()
with output in linear range
I
BIAS
Input bias current
4
T
amb
= 25
C
25
250
nA
Over temp.
400
nA
I
IN(+)
I
IN()
I
OS
Input offset current
T
amb
= 25
C
5.0
50
nA
Over temp.
150
nA
I
OL
Output sink current
V
IN()
1 V
DC
; V
IN(+)
= 0; V
O
1.5 V
DC
T
amb
= 25
C
6.0
16
mA
V
IN(+)
1 V
DC
; V
IN()
= 0,
Output leakage current
V
O
= 5 V
DC
; T
amb
= 25
C
0.1
nA
V
O
= 30 V
DC
; over temp.
1.0
A
I
CC
Supply current
R
L
=
on both comparators,
T
amb
= 25
C
0.8
1
mA
I
CC
Supply current
R
L
=
on both comparators;
V+ = 30 V
2.5
mA
A
V
Voltage gain
R
L
15 k
; V+ = 15 V
DC
50
200
V/mV
V
IN()
1 V
DC
; V
IN(+)
= 0; I
SINK
4 mA
V
OL
Saturation voltage
T
amb
= 25
C
250
400
mV
Over temp.
700
mV
t
LSR
Large signal response time
V
IN
= TTL logic swing,
V
REF
= 1.4 V
DC
; V
RL
= 5 V
DC
;
R
L
= 5.1 k
; T
amb
= 25
C
300
ns
t
R
Response time
5
V
RL
= 5 V
DC
; R
L
= 5.1 k
T
amb
= 25
C
1.3
s
NOTES:
1. Positive excursions of input voltage may exceed the power supply level by 17 V. As long as the other voltage remains within the
common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than 0.3 V
DC
(V
DC
below the magnitude of the negative power supply, if used).
2. At output switch point, V
O
1.4 V
DC
, R
S
= 0
with V+ from 5 V
DC
to 30 V
DC
and over the full input common-mode range (0 V
DC
to
V+ 1.5 V
DC
).
3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3 V. The upper end of
the common-mode voltage range is V+ 1.5 V, but either or both inputs can go to 30 V
DC
without damage.
4. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of
the output so no loading change exists on the reference or input lines.
5. The response time specified is for a 100 mV input step with a 5 mV overdrive.
6. For input signals that exceed V
CC
, only the over-driven comparator is affected. With a 5 V supply, V
IN
should be limited to 25 V maximum,
and a limiting resistor should be used on all inputs that might exceed the positive supply.