2001 Dec 13
3
Philips Semiconductors
Product specification
Enhanced TV microcontrollers with
On-Screen Display (OSD)
SAA56xx
1
FEATURES
Single-chip higher frequency microcontroller with
integrated On-Screen Display (OSD)
Versions available with integrated Data Capture
Both active HIGH and active LOW reset pins
OTP memory for both Program ROM and character sets
In-System Programming (ISP) option for the embedded
OTP memories using IEEE1149 (JTAG: Joint Test
Action Group) interface
Single power supply: 3.0 to 3.6 V
5 V tolerant digital inputs and I/O
32 I/O ports via individual addressable controls
Larger Character ROM, up to 1020 characters of
12
10 pixels
Smoothing capability on sized characters
Programmable I/O for push-pull, open-drain and
quasi-bidirectional and high-impedance
Two port lines with 8 mA sink (at <0.4 V) capability, for
direct drive of LED
Single crystal oscillator for microcontroller, OSD and
Data Capture
Power reduction modes: Idle, Standby and Power-down
Byte level I
2
C-bus up to 400 kHz dual port I/O
64 Dynamically Redefinable Characters for OSDs
Increased special graphic characters allowing four
colours per character
Selectable character height 9, 10, 13 and 16 TV lines
Pin compatibility throughout family
Operating temperature:
-
20 to +70
C.
2
GENERAL DESCRIPTION
The SAA56xx family of microcontrollers are a derivative of
the Philips industry-standard 80C51 microcontroller and
are intended for use as the central control mechanism in a
television receiver. They provide control functions for the
television system, OSD and incorporate an integrated
Data Capture and display function for either Teletext or
Closed Caption.
Additional features over the SAA55xx family have been
included, e.g. 100/120 Hz (2H/2V only) display timing
modes, two page operation (50/60 Hz mode for 16:9, 4:3),
higher frequency microcontroller, increased character
storage, more 80C51 peripherals and a larger Display
memory. For CC operation, only a 50/60 Hz display option
is available.
As with the rest of the SAA55xx family, the Data Capture
hardware can decode and display both 525-line and
625-line World System Teletext (WST), Closed Caption
information, Video Programming System (VPS)
Information and Wide Screen Signalling (WSS)
information. The same display hardware is used for
Teletext, Closed Caption and On-Screen Display, which
means that the display features available give greater
flexibility to differentiate the TV set.
The family of devices offers a range of memory variants
with Program ROM sizes of 128-kbyte and 192-kbyte, also
up to 14 kbytes of RAM.
2001 Dec 13
4
Philips Semiconductors
Product specification
Enhanced TV microcontrollers with
On-Screen Display (OSD)
SAA56xx
3
QUICK REFERENCE DATA
4
ORDERING INFORMATION
Notes
1. `nnnn' is a four digit number uniquely referencing the microcontroller program mask.
2. Extendible to 8-kbyte in external SRAM application, see Fig.8.
SYMBOL
PARAMETER
MIN.
TYP.
MAX.
UNIT
Supply
V
DDX
any supply voltage (V
DD
to V
SS
)
3.0
3.3
3.6
V
I
DDP
periphery supply current
1.0
-
-
mA
I
DDC
core supply current
-
15.0
18.0
mA
I
DD(id)
Idle mode supply current
-
4.6
6.0
mA
I
DD(pd)
Power-down mode supply current
-
0.76
1.0
mA
I
DDA
analog supply current
-
45.0
48.0
mA
I
DDA(id)
Idle mode analog supply current
-
0.87
1.0
mA
I
DDA(pd)
Power-down mode analog supply current
-
0.45
0.7
mA
f
xtal
crystal frequency
-
12.0
-
MHz
T
amb
operating ambient temperature
-
20
-
+70
C
T
stg
storage temperature
-
55
-
+125
C
TYPE
NUMBER
(1)
PACKAGE
ROM
DATA
RAM
DATA CAPTURE
NAME
DESCRIPTION
VERSION
SAA5667HL/nnnn LQFP100 plastic low profile quad flat
package; 100 leads; body
14
14
1.4 mm
SOT407-1
192-kbyte
2-kbyte
(2)
text and line 21
SAA5665HL/nnnn
128-kbyte
text and line 21
SAA5647HL/nnnn
192-kbyte
line 21 only
SAA5645HL/nnnn
128-kbyte
line 21 only
PDF 
ZIP
