PJ30C60
30 AMP SCHOTTKY BARRIER RECTIFIERS
1-2
2003/05.rev.B-1
Metal of silicon rectifier, majority carrier conduction
Low power loss.high efficiency
High current capability, low V
f
High surge capacity
Guard ring for transient protection
High temperature soldering guaranteed:250 /10
Seconds/0.375"(9.5mm) lead lengths at 5 lbs(2.3Kg)
tension
For use in low voltage , high frequency inverters, free
wheeling, and poparity protection applications.
Device Operating
Temperature
Package
PJ30C60CZ TO-220
PJ30C60CI
TO-220F
Ratings at 25
ambient temperature unless otherwise specified. Single phase, half wave 60Hz, resistive or inductive load. For
capacitive load, derate current by 20%.
Parameter Symbol
PJ30C60
Units
Maximum Recurrent Peak Reverse Voltage
V
RRM
60 V
Maximum RMS Voltage
V
RMS
31.5 V
Maximum DC Blocking Voltage
V
DC
45 V
Maximum Average Forward Rectified Current See Fig.1
I
F(AV)
30 A
Peak Forward Surge Current, 8.3ms single half Sinewave
superimposed on rated load (JEDEC Method)
I
FSM
275 A
Maximum Instantanuous Forward Voltage Per Leg I
f
=5A,Tc=25
(Note 3)
V
f
0.70 V
Maximum Average Reverse Current at T
A
=25
C
Rated DC Blocking Voltage per Clement T
A
=100
I
R
1.0
75
mA
Typical Thermal Resistance.(Note 1)
R
JC
2 /W
Typical Junction Capacitance (Note 2)
C
J
1100 PF
Operating Temperature Range
T
J
-40 to +125
Storage Temperature Range
T
STG
-65 to +150
NOTES: 1. Thermal Resistance Junction to CASE.
2. Measured at 1MHz and applied reverse voltage of 4.0 volts.
3. 300
s Pulse Width, Duty cycle 2%.
FEATURES
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
ORDERING INFORMATION
-20+85
TO-3P
PDF 
ZIP