Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
To all our customers
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better
and more reliable, but there is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corporation product best suited to the customer's application; they do not convey any
license under any intellectual property rights, or any other rights, belonging to Renesas Technology
Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corporation without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corporation
or an authorized Renesas Technology Corporation product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss
rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various
means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Renesas Technology
Corporation assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device
or system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor
when considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other
than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products
contained therein.
HB28D096A8HSR/HB28D032A8HSR
Wide Temperature Range Version
FLASH ATA Card
96 MByte/32 MByte
ADE-203-1378A (Z)
Rev. 1.0
Dec. 10, 2002
Description
HB28D096A8HSR, HB28D032A8HSR are Flash ATA card. This card complies with PC card ATA standard
and is suitable for the usage of data storage memory medium for PC or any other electric equipment. This
card is equipped with 0.18
m CMOS 256 Mega bit Flash memory. This card is suitable for ISA (Industry
Standard Architecture) bus interface standard , and read/write unit is 1 sector (512 bytes) sequential access.
By using this card it is possible to operate good performance for the system which have PC card slots.
Features
PC card ATA standard specification
68 pin two pieces connector and Type II (5 mm)
3.3 V/5 V single power supply operation
ISA standard and Read/Write unit is 512 bytes (sector) sequential access
Sector Read/Write transfer rate: 8MB/sec burst
HB28D096/032A8HSR
2
Card density is 160 Mega bytes maximum
This card is equipped 0.18
m CMOS 256 Mega bit Flash memory
3 variations of mode access
Memory card mode
I/O card mode
True IDE mode
Internal self-diagnostic program operates at V
CC
power on
High reliability based on internal ECC (Error Correcting Code) function
Auto Sleep Function
Temperature range:
-
25 to
+
85
C
Data write is 300,000 cycles/block.*
1
Note: 1. One block consists of four sectors (512 byte
4).
Card Line Up*
1
Type No.
Card density
Capacity*
4
Total sectors/
card*
3
Sectors/
track*
2
Number
of head
Number of
cylinder
HB28D096A8HSR
96 MB
95,944,704 byte
187,392
32
8
732
HB28D032A8HSR
32 MB
32,047,104 byte
62,592
32
4
489
Notes: 1. These data are written in ID.
2. Total tracks = number of head
number of cylinder.
3. Total sectors/card = sectors/track
number of head
number of cylinder.
4. It is the logical address capacity including the area which is used for file system.
PDF 
ZIP