EMD5 / UMD5N
Transistors
Rev.A
1/4
General purpose
(dual digital transistors)
EMD5 / UMD5N
Features
1) Both the DTA143X chip and DTC144E chip in an
EMT6 or UMT6 package.
2) Mounting possible with EMT3 or UMT3 automatic
mounting machines.
3) Transistor elements are independent, eliminating
interference.
4) Mounting cost and area can be cut in half.
Structure
A PNP and NPN digital transistor
(each with a single built in resistor)
The following characteristics apply to both the DTr
1
and
DTr
2
, however, the "
-
" sign on DTr
2
values for the PNP
type have been omitted.
Equivalent circuit
EMD5 / UMD5N
DTr
2
DTr
1
(3)
(2)
(1)
(4)
(5)
(6)
R
1
R
1
DTr
1
R
2
R
2
R
1
/R
2
=47k
/
47k
DTr
2
R
1
/R
2
=4.7k
/
10k
External dimensions (Unit : mm)
ROHM : EMT6
EMD5
ROHM : UMT6
EIAJ : SC-88
UMD5N
Abbreviated symbol :D5
Abbreviated symbol : D5
0.22
1.2
1.6
(1)
(2)
(5)
(3)
(6)
(4)
0.13
0.5
0.5
0.5
1.0
1.6
Each lead has same dimensions
Each lead has same dimensions
0
0.1
( 6
)
2.0
1.3
0.9
0.15
0.7
0.1Min.
2.1
0.65
0.2
1.25
( 1
)
0.65
( 4
)
( 3
)
( 2
)
( 5
)
Packaging specifications
Package
Code
TR
3000
Taping
Basic ordering
unit (pieces)
UMD5N
T2R
8000
EMD5
Type
Appendix
Appendix1-Rev1.1
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
PDF 
ZIP
