16COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
S6A2068
1
Precautions for Light
Light has characteristics to move electrons in the integrated circuitry of semiconductors, therefore may change
the characteristics of semiconductor devices when irradiated with light. Consequently, the users of the packages
which may expose chips to external light such as COB, COG, TCP and COF must consider effective methods to
block out light from reaching the IC on all parts of the surface area, the top, bottom and the sides of the chip.
Follow the precautions below when using the products.
1. Consider and verify the protection of penetrating light to the IC at substrate (board or glass) or product
design stage.
2. Always test and inspect products under the environment with no penetration of light.
INTRODUCTION
The S6A2068 is a dot matrix LCD driver & controller LSl which is fabricated by low power CMOS technology.
FUNCTION
-- Character type dot matrix LCD driver & controller
-- Internal driver: 16 common and 60 segment signal output
-- Display character format: 5
7 dots + cursor, 5
10 dots + cursor
-- Easy interface with a 4-bit or 8-bit MPU
-- Display character pattern: 57 dots format: 192 kinds, 510 dots format: 32 kinds
-- The special character pattern is directly programmable by the Character Generator RAM.
-- A customer character pattern programmable by mask option
-- Automatic power on reset function
-- It can drive a maximum of 80 characters by using the S6A0065 or S6A2067 externally.
-- It is possible to read both Character Generator and Display Data RAM from MPU.
FEATURES
-- Internal Memory
Character Generator ROM: 8,320bits
Character Generator RAM: 512 bits
Display Data RAM: 80
8bits (80 characters max.)
-- Power Supply Voltage; 2.7 to 5.5V
-- Supply voltage for display: 0 to -5 V (V5)
-- CMOS process
-- 1/8 duty, 1/11 duty or 1/16 duty: programmable
(1/8 duty; 5
7 dots format 1-line, 1/11 duly; 5
10 dots format 1-line, 1/16 duty: 5
7 dots format 2-line)
-- 100 QFP or bare chip available
S6A2068
16COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
4
PAD DIAGRAM
1
2 3
4 5
6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
S6A2068
79 78
77 76 75
74 73
72 71 70
69 68
67 66 65
64 63
62 61 60
59 58
57 56 55
54 53
52 51
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
Chip size: 3700
5050
Pad size: 100
100
Unit:
m
(0, 0)
X
Y
Figure 3. S6A2068 Pad Diagram
* S6A2068 Marking: easy to find the PAD No. 77, 82