S6B2104
80CH SEGMENT DRIVER FOR DOT MATRIX LCD
July. 2001
Ver. 0.0
Contents in this document are subject to change without notice. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written
permission of LCD Driver IC Team.
Precautions for Light
Light has characteristics to move electrons in the integrated circuitry of semiconductors, therefore may change
the characteristics of semiconductor devices when irradiated with light. Consequently, the users of the packages
which may expose chips to external light such as COB, COG, TCP and COF must consider effective methods to
block out light from reaching the IC on all parts of the surface area, the top, bottom and the sides of the chip.
Follow the precautions below when using the products.
1. Consider and verify the protection of penetrating light to the IC at substrate (board or glass) or product design
stage.
2. Always test and inspect products under the environment with no penetration of light.
80CH SEGMENT DRIVER FOR DOT MATRIX LCD
S6B2104
3
CONTENTS
INTRODUCTION ............................................................................................................................................. 1
FEATURES..................................................................................................................................................... 1
BLOCK DIAGRAM .......................................................................................................................................... 2
PIN CONFIGURATION .................................................................................................................................... 3
MAXIMUM ABSOLUTE LIMIT ......................................................................................................................... 4
ELECTRICAL CHARACTERISTICS........... ...................................................................................................... 5
PIN DESCRIPTION ......................................................................................................................................... 8
POWER DOWN FUNCTION............................................................................................................................11
80CH SEGMENT DRIVER FOR DOT MATRIX LCD
S6B2104
1
INTRODUCTION
The S6B2104 is a LCD driver IC which is fabricated by low power CMOS high voltage process technology. This
device consists of 80 bit bi-directional shift register, 80 bit data latch and 80 bit driver.
FEATURES
--
Power supply voltage: +5V
10%, +3V
10%
--
Supply voltage for display: 6 to 28V (V
DD
-V
EE
)
--
Parallel data processing (4 bit)
--
Applicable LCD duty: 1/64 to 1/256
--
Interface
Drivers
COM
SEG (cascade)
S6B0086
Other S6B2104
--
High voltage CMOS process
--
100 QFP or bare chip available
PDF 
ZIP
