DBD10
No.7030-1/3
Features
Plastic molded structure.
Peak reverse voltage : VRM=200V, 600V.
Average rectified current : IO=1.0A.
Electrical Connection
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN7030A
DBD10
Package Dimensions
unit : mm
1314
Surface mount type (TM emboss taping)
[DBD10]
N0901 GI IM / 73001 GI IM
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Diffused Junction Silicon Diode
1.0A Single-Phase Bridge Rectifier
6.5
1.0
1.0
10.0
C0.8
2.5
0.1
6.8
3.0
1.3
1.3
0.25
SANYO : DBD10-TM
--
+
Package Dimensions
unit : mm
1313
[DBD10]
7.62
max15
max15
6.5
3.2
3.7max
0.55
C0.8
0.25
2.5
5.0
6.8
SANYO : DBD10
DBD10
No.7030-2/3
1.0
10
0
10
20
30
40
50
2
3
5
7
2
3
5
7
100
IFSM -- n
50Hz
0
1.2
0
0.6
0.4
0.2
1.0
0.8
160
20
40
60
80
100
120
140
IO -- Ta
0.01
0.2
0.4
0.6
0.8
1.0
0
0.1
10
7
5
3
2
1.0
7
5
3
2
7
5
3
2
1.6
1.2
1.4
IF -- VF
IT03617
IT03618
IT03619
0
0
0.5
1.0
1.5
2.0
3.0
2.5
0.2
0.4
0.6
0.8
1.0
1.2
1.4
PF -- IO
IT03620
T
a=150
C
25
C
Forward Voltage, VF -- V
Number of Cycle at 50Hz -- n
F
orw
ard Current, I
F
--
A
Sur
ge F
orw
ard Current, I
FSM
--
A
Average Forward Current, IO -- A
A
v
erage F
orw
ard Current, I
O
--
A
A
v
erage F
orw
ard Po
wer Dissipation, P
F
--
W
Ambient Temperature, Ta --
C
Resisti
ve
load
Specifications
Absolute Maximum Ratings
at Ta=25
C
Parameter
Symbol
Conditions
Ratings
Unit
DBD10C
DBD10G
Peak Reverse Voltage
VRM
200
600
V
Average Rectified Current
IO
Ta=25
C
1.0
A
Surge Forward Current
IFSM
50Hz sine wave 1cycle
30
A
Junction Temperature
Tj
150
C
Storage Temperature
Tstg
--40 to +150
C
Electrical Characteristics
at Ta=25
C
Ratings
Parameter
Symbol
Conditions
min
typ
max
Unit
Forward Voltage
VF
IF=0.5A
1.05
V
Reverse Current
IR
VR : At each VRM
10
A
Thermal Resistance
Rth(j-l)
Junction-Lead
15
C / W
Thermal Resistance
Rth(j-a)
Junction-Ambient
68
C / W
DBD10
No.7030-3/3
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the author ities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 2001. Specifications and information herein are subject
to change without notice.
PS
PDF 
ZIP