SBE805
No.7291-1/3
Features
Low forward voltage (VF max=0.55V).
Fast reverse recovery time (trr max=10ns).
Composite type with 2 diodes contained in the CPH
package currently in use, improving the mounting
efficiency greatly.
The chips incorporated are both equivalent to
the SB05-03C.
Specifications
Absolute Maximum Ratings
at Ta=25
C (Value per element)
Parameter
Symbol
Conditions
Ratings
Unit
Repetitive Peak Reverse Voltage
VRRM
30
V
Non-repetitive Peak Reverse Surge Voltage
VRSM
35
V
Average Output Current
IO
500
mA
Surge Forward Current
IFSM
50Hz sine wave, 1 cycle
5
A
Junction Temperature
Tj
--55 to +125
C
Storage Temperature
Tstg
--55 to +125
C
Electrical Characteristics
at Ta=25
C (Value per element)
Ratings
Parameter
Symbol
Conditions
min
typ
max
Unit
Reverse Voltage
VR
IR=150
A
30
V
Forward Voltage
VF
IF=500mA
0.55
V
Reverse Current
IR
VR=15V
30
A
Interterminal Capacitance
C
VR=10V, f=1MHz
16
pF
Reverse Recovery Time
trr
IF=IR=100mA, see specified Test Circuit.
10
ns
Thermal Resistance
Rth(j-a)
300
C / W
Marking : SE
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN7291
SBE805
30V, 500mA Rectifier
Package Dimensions
unit : mm
1294
[SBE805]
O1002 TS IM TA-3609
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Silicon Schottky Barrier Diode
1 : Cathode
2 : Cathode
3 : Anode
4 : No Contact
5 : Anode
SANYO : CPH5
1.6
0.6
0.6
2.8
0.2
2.9
0.05
0.4
0.95
0.2
0.9
0.7
0.15
0.4
1
2
3
4
5
SBE805
No.7291-2/3
0
0.4
0.5
0.6
0.1
0.2
0.3
2
1.0
7
5
3
2
0.1
7
5
0.01
7
5
3
2
3
0.7
IF -- VF
ITR10727
0
1000
5
2
2
100
2
5
2
10
5
1.0
5
2
0.1
5
2
35
10
5
15
20
25
30
IR -- VR
ITR10728
7 0.01
2
3
7 0.1
0
5
2
3
7 1.0
5
2
3
6
7
4
2
5
3
1
ITR10730
5
10
3
7
7
5
3
2
100
2
C -- VR
ITR10729
IS -- t
1.0
10
2
3
5
7
7
2
3
5
7
100
T
a=125
C
25
C
--25
C
75
C
Ta=125
C
25
C
50
C
75
C
100
C
I
S
20ms
t
f=1MHz
Forward Voltage, VF -- V
F
orw
ard Current, I
F
--
A
Reverse Voltage, VR -- V
Re
v
erse Current, I
R
--
A
Reverse Voltage, VR -- V
Interterminal Capacitance, C
-
-
pF
Time, t -- s
Sur
ge F
orw
ard Current, I
S
(Peak)
--
A
Current waveform 50Hz sine wave
Electrical Connection
trr Test Circuit
1
2
5
3
(Top view)
4
1 : Cathode
2 : Cathode
3 : Anode
4 : No Contact
5 : Anode
Duty
10%
50
100
10
5V
trr
10
s
100mA
100mA
10mA
SBE805
No.7291-3/3
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the author ities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of October, 2002. Specifications and information herein are subject
to change without notice.
PS
PDF 
ZIP