SPM3204
No.0000-1/3
Features
Control voltage +3 / 0V.
MCP package.
Low Insertion loss.
High isolation.
High linearity.
Low VSWR.
Specifications
Absolute Maximum Ratings
at Ta=25
C
Parameter
Symbol
Ratings
Unit
Control Voltage
VCTL
5.0
V
Power Dissipation
PD
150
mW
Storage Temperature
Tstg
-
55 to +150
C
Operating Temperature
Topg
-
20 to +70
C
Electrical Characteristics
at Ta=25
C
Control Voltage 1, 2 : 0 / +3V
Rathing
Parameter
Conditions
min
typ
max
Unit
f=1GHz
0.55
0.85
dB
Insertion Loss
IN -
- OUT1, IN -
- OUT2
f=2GHz
0.6
0.9
dB
f=2.5GHz
0.65
0.95
dB
f=1GHz
21
24
dB
Isolation
IN -
- OUT1, IN -
- OUT2
f=2GHz
17
20
dB
f=2.5GHz
15
18
dB
VSWR
IN -
- OUT1, IN -
- OUT2
f=1GHz to 2.5GHz
1.1
1.5
Switching Time
f=1GHz to 2.5GHz
20
100
ns
PIN1dB
IN -
- OUT1, IN -
- OUT2
f=1GHz to 2.5GHz
26
30
dBm
Marking : MM4
CTL1
CTL2
+3V
0V
IN
OUT1
0
+3V
IN
OUT2
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN0000
SPM3204
RF Switch MMIC
Package Dimensions
unit : mm
1297
[SPM3204]
GI IM
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
1 : CTL2
2 : IN
3 : CTL1
4 : OUT1
5 : GND
6 : OUT2
SANYO : MCP6
0 to 0.1
0.65
2.0
1.25
0.425
0.425
2.1
0.25
1
2
5
4
0.15
0.9
0.2
0.2
3
6
SPM3204
No.0000-2/3
Isolation -- Frequency
Isolation (dB)
Frequency (GHz)
Insertion Loss -- Frequency
Insertion Loss (dB)
Frequency (GHz)
Output Power -- Input Power
Output Po
wer (dBm)
Input Power (dBm)
0.3
0.4
0.5
0.6
0.7
0.8
0.5
1.0
1.5
2.0
2.5
3.0
0
5
10
15
20
25
30
0
5
10
15
20
25
30
IT02477
IT02475
IT02476
0 / 3V, f=1.0 to 2.5GHz
15
16
17
18
19
20
20
20
20
20
25
0.5
1.0
1.5
2.0
2.5
3.0
Vct1+3 / 0, Pin= +10dBm
Vct1+3 / 0, Pin= +10dBm
80
60
40
20
100
140
120
160
0
0
20
40
60
80
100
120
140
160
PD -- Ta
Ambient Temperature, Ta --
C
Allo
w
able Po
wer Dissipation, P
D
-
-
mW
IT02653
Application Circuit
CTL2
CTL1
IN
OUT2
OUT1
C
C : at 0.8 to 1.5GHz 33pF
at 1.9 to 2.5GHz 10pF
C
C
( Zo = 50
)
1
2
3
6
5
4
SPM3204
No.0000-3/3
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the author ities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of Feburuary, 1999. Specifications and information herein are subject
to change without notice.
PS
PDF 
ZIP