221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798
World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 125, REV B
HIGH CURRENT AXIAL LEAD RECTIFIERS
DESCRIPTION: 400 VOLT, 3.0 AMP, 2000 NANOSECOND RECTIFIER
MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at T
A
= 25
o
C unless otherwise specified.
RATING
CONDITIONS
MIN
TYP
MAX
UNIT
Peak Inverse Voltage
(PIV)
- -
-
400
Vdc
Average DC Output
Current (I
o
)
T
A
= +55
o
C -
-
3.0
Amps
Peak Single Cycle Surge
Current (I
fsm
)
t
p
= 8.3 ms Single
Half Cycle Sine
Wave,
Superimposed On
Rated Load
- - 80 Amps(pk)
Operating and Storage
Temp. (T
op
& T
stg
)
- -65
-
+175
C
Maximum Forward
Voltage (V
f
)
I
f
= 9.0A (300
sec
pulse, duty cycle <
2%)
- - 1.5 Volts
Maximum Instantaneous
Reverse Current At Rated
(PIV)
T
A
= 25
C
T
A
= 100
C
- - 1.0
20
Amps
Reverse Recovery Time
(t
rr
)
I
f
= 0.5A, I
r
= 1.0A, I
rr
= 0.25A
- -
150 nsec
Thermal Resistance (
JL
)
d = 0.375"
-
-
20
C/W
MECHANICAL DIMENSIONS In Inches / (mm), min./max.
Note: The cathode side is marked with a dark colored band on one side of the diode body.
1N5418
JAN1N5418
JANTX1N5418
JANTXV1N5418
.260
.130
(6.60
3.30)
1.30
0.90
(33.0
22.9)
.180
.115
(4.57
2.92)
0.042
0.037
(1.07
0.94)
PKG. 301
221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798
World Wide Web - www.sensitron.com E-mail Address - sales@sensitron.com
SENSITRON SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 125, REV B
1N5418
JAN1N5418
JANTX1N5418
JANTXV1N5418
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users'
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
PDF 
ZIP