221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 378, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
200
C Maximum Operation Temperature
DESCRIPTION: 100 VOLT, 3 AMP, HERMETIC POWER SCHOTTKY RECTIFIER IN A SHD-1/1A/1B
PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ T
C
= 25
C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PEAK INVERSE VOLTAGE
PIV
100
Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ T
C
=100
O
C) I
O
3.0
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t=8.3ms, Sine)
I
FSM
55
Amps
MAXIMUM JUNCTION CAPACITANCE (V
r
=5V) C
T
100
pF
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
R
JC
3.7
C/W
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Top/Tstg
-65 to
+ 200
C
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (I
f
= 3.0 Amps)
T
J
= 25
C
T
J
= 125
C
V
f
0.84
0.68
Volts
MAXIMUM REVERSE CURRENT (I
r
@ 100V PIV)
T
J
= 25
C
T
J
= 125
C
I
r
0.07
1.6
mA
SHD116044
SHD116044B
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com
SENSITRON
DATA SHEET 378, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
SHD116044
SHD116044B
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Forward Voltage Drop - V
F
(V)
10
-3
10
-2
10
-1
10
0
I
n
st
ant
aneous Forward Current
- I
F
(A)
Typical Forward Characteristics
125 C
200 C
175 C
25 C
0
20
40
60
80
100
120
Reverse Voltage - V
R
(V)
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
I
n
st
ant
aneous Reverse Current
- I
R
(m
A)
Typical Reverse Characteristics
25 C
50 C
75 C
100 C
125 C
150 C
200C
175 C
0
20
40
60
80
100
120
Reverse Voltage - V
R
(V)
10
20
30
40
50
60
70
80
90
Junct
i
on Capacit
ance - C
T
(pF)
Typical Junction Capacitance
SHD-1B
.090 (2.29) Max
Alumina Ring
Moly Base
(Cathode)
.060.010
(1.52.254)
.015.002
(.381.051)
.020.005 R
(.508.127 )
.225.010
(5.71.254)
.150.010
(3.81.254)
.375.020
(9.52.508)
.225.010
(5.71.254)
.015.005
(.381.127)
Copper Anode
SHD-1
.225.010
(5.71.254)
.075 (1.91) M ax
A lum ina R ing
.225.010
(5.71.254)
M oly Lid
M oly Base
221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798
World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com
SENSITRON
DATA SHEET 378, REV. A
SHD116044
SHD116044B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users'
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
PDF 
ZIP