ChipFind - документация

Электронный компонент: U143M

Скачать:  PDF   ZIP
U143M
Preliminary Information
TELEFUNKEN Semiconductors
Rev. A1, 26-Jun-96
1 (4)
7-Segment Decoder Driver
Technology: PMOS
Features
D Display numbers from 1 to 16
D Supply voltage V
S
= 12 V
D Output currents I
01
to I
09
= 10 mA
D Input code BCD + 1
D Pull-up resistors 50 kW to V
S
D Separate input for dark switching
Case:
16 pin dual inline plastic
Figure 1. Block diagram
Absolute Maximum Ratings
Parameters
Symbol
Value
Unit
Supply voltage range
Pin 16
V
S
13.5 to +0.3
V
Supply current
Pin 1
I
S
150
mA
Output current of one
output
Pin 7 to 15
I
01
to I
09
50
mA
Total power dissipation
I
01
to I
09
10 mA = 90 mA
V
01
to V
09
= 2 V, T
amb
= 70
C
P
tot
220
mW
U143M
TELEFUNKEN Semiconductors
Rev. A1, 26-Jun-96
Preliminary Information
2 (4)
Electrical Characteristics
V
S
= 12 V, reference point Pin 1, T
amb
= 25
C, unless otherwise specified
Parameters
Test Conditions / Pin
Symbol
Min
Typ
Max
Unit
Supply voltage
Pin 16
V
S
10.8
12
13.2
V
Supply quiescent current
Pin 1
I
SB
1.5
mA
Output reverse current
V
0
= 13.2 V,
T
amb
= 70
C Pin 7
to
15
I
0R
50
mA
Output voltage level
Logic "0"
Logic "1"
Pin 7 to 15
V
OH
V
OL
10.8
2.0
V
V
Output current
V
OH
= 2 V,
T
amb
= 25
C Pin 7
to
15
T
amb
= 7
C Pin 7
to
15
I
O
I
O
12
10
mA
mA
Input voltage level
Logic "0"
Logic "1"
Pin 2 to 6
V
IH
V
IL
0.3
13.2
+1
4.0
V
V
Input currents
V
IL
= 4.0 V
V
IH
= 1.0 V
Pin 2 to 6
I
IL
I
IH
10
120
mA
mA
Truth Table
U143M
Preliminary Information
TELEFUNKEN Semiconductors
Rev. A1, 26-Jun-96
3 (4)
Dimensions in mm
U143M
TELEFUNKEN Semiconductors
Rev. A1, 26-Jun-96
Preliminary Information
4 (4)
Ozone Depleting Substances Policy Statement
It is the policy of TEMIC TELEFUNKEN microelectronic GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems
with respect to their impact on the health and safety of our employees and the public, as well as their impact on
the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as
ozone depleting substances ( ODSs ).
The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and
forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban
on these substances.
TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of
continuous improvements to eliminate the use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively
2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency ( EPA ) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively.
TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain
such substances.
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer
application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized
application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of,
directly or indirectly, any claim of personal damage, injury or death associated with such unintended or
unauthorized use.
TEMIC TELEFUNKEN microelectronic GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423